I have the latest WWE light Rom from Bepe (.079) and I have problems using NoData from MoDaCo.
It first worked great with my dutch adewidt Rom. But I'm using Bepe's rom now. I first tried the Full (with TomTom) version but it didn't work there. Now I'm using te Light version but it still doesn't work. So it has to do something with the bepe's Rom I think.
Strangeley I get a dutch error. See the picture below (The rom is WWE?? And the maker of NoData isn't dutch either??)
(click for bigger picture)
In english it says:
There has been an unexpected error in NoData.exe.
Click on Exit ("Afsluiten") and start the program again. Click on details for more information
And when I click on Details I'll get this screen:
(click for bigger picture)
What can this be? And what can I do about it? I have tried reinstalling it a few times but that doesn't make a difference..
I really liked the app when I was running the dutch rom. But I really want to use it on this Bepe's ROM
NoData Error
Markos said:
I have the latest WWE light Rom from Bepe (.079) and I have problems using NoData from MoDaCo.
It first worked great with my dutch adewidt Rom. But I'm using Bepe's rom now. I first tried the Full (with TomTom) version but it didn't work there. Now I'm using te Light version but it still doesn't work. So it has to do something with the bepe's Rom I think.
Strangeley I get a dutch error. See the picture below (The rom is WWE?? And the maker of NoData isn't dutch either??)
(click for bigger picture)
In english it says:
There has been an unexpected error in NoData.exe.
Click on Exit ("Afsluiten") and start the program again. Click on details for more information
And when I click on Details I'll get this screen:
(click for bigger picture)
What can this be? And what can I do about it? I have tried reinstalling it a few times but that doesn't make a difference..
I really liked the app when I was running the dutch rom. But I really want to use it on this Bepe's ROM
Click to expand...
Click to collapse
I would first re-download the NoData program again. Make a backup. Do a hard reset. Reload NoData. If that does not work. Load Eirher Mary's or Karmba's ROM and try that. Both very good. If they work, then you know the problem.
One reason for that error is if the data details/configuration has not been set up
I have set up my MMS gprs settings. Further I haven't changed a thing.. But I also only changed this settings with the dutch adewidt rom
So what should I do? What do I have to change in what?
I have the exactly same problem with my P3600i (Mary 3.7)
Tried to Hard Reset, but doesn't work
Help!
hi
sorry my english is very bad
install paramete provider first .
exemple parameter french operateur =>> first orange world , orange mms , reset
Second =>>> modaco nodat =>>it ok
Related
Hi, have a small problem....
have no video call button on dial screen???
what can the problem be??
need bit more information then that. What device is it specifically? Did you stop the extended rom from installing or perform the reg hack thats disables phone skin?
herman3101 said:
need bit more information then that. What device is it specifically? Did you stop the extended rom from installing or perform the reg hack thats disables phone skin?
Click to expand...
Click to collapse
its e htc tytn
i stop the extended rom installation!!
no reg hack...
also problems with the zphone skin...
maybe its the problem with stoping the installtion?! how can i fix this?!
is there any solution to enter the extended rom to watch whats inside??
steve
Its still not clear which ROM version you are using, i can advise to install the .cabs from the latest HTC ext rom this will restore the video call and phonepad.
use the fit4cat registry tweak program (search this forum for link), this gives you the facility to unlock your extended rom. personally I would recommend you don't stop the extended rom installation unless you know what you are doing as many of the cabs aren't self explanatory.
mrvanx said:
Its still not clear which ROM version you are using, i can advise to install the .cabs from the latest HTC ext rom this will restore the video call and phonepad.
Click to expand...
Click to collapse
whats the differences between wwe and ger ?!
version display on startup:
M 05
S04
B05
R 1.03.03.10
G 32.347010.01H
D 1.18
wwe = world wide english
ger = german
the code refers to the language of the ROM
herman3101 said:
wwe = world wide english
ger = german
the code refers to the language of the ROM
Click to expand...
Click to collapse
ok all right now...
updated the ext. rom to htc ... before i had the eplus software on...
where are speed tests available for the tytn ?! on dslreports.com/stest only with java...
is there any pocket java version available???
steve
yes, jave 2 micro edition or j2me for short. should utomaticlly be installed with the extended rom. look for a program entitled midlet manager
futureshock said:
herman3101 said:
wwe = world wide english
ger = german
the code refers to the language of the ROM
Click to expand...
Click to collapse
ok all right now...
updated the ext. rom to htc ... before i had the eplus software on...
where are speed tests available for the tytn ?! on dslreports.com/stest only with java...
is there any pocket java version available???
steve
Click to expand...
Click to collapse
try a test from bandwidthplace.com it will work with your TyTN no problem, i got around 1mbps on O2-UK 3G.
Hello,
Does anybody know if there is already an official HTC Dutch shipped ROM available for the HTC Touch Cruise?
I would like to try some of the ROMs available in this forum, however I want to be able to switch back to the original Dutch ROM in case of problems.
Peter
I second that.
Eager to try those light and clean ROMs
I need one too...anyone has an idea how to dump your own ROM?
That makes four of us in need for a dutch ROM...
reken mij ook in 't rijtje...heb helaas ook geen dump gemaak
Please add me to the list.
I could dump the rom if someone tells me how to.
(orgineel draait nog)
--------------------------------------------------------------
Misschien via dit topic: http://forum.xda-developers.com/showthread.php?t=371533
I have raw files for you and maybe in a few days a complete ROM.
Can someone provide me some FTP access or webspace?
How much space do you need for the FTP?
Het is al opgelost:
Dumped Polaris NL (Dutch) Files:
(1.25.404.1 - if i'm correct)
Part 00: http://rapidshare.com/files/94263502/Part00.raw.html
Part 01: http://rapidshare.com/files/94264009/Part01.raw.html
Part 02: http://rs31.rapidshare.com/files/94262811/Part02.raw
Part 03: +100 MB, can't upload to rapidshare
The Part02 file is the file you are interested in.
Using this file you can create your own ROM.
Use this guide: http://www.modaco.com/content/HTC-H...rebuilding-and-restoring-your-HTC-HERMES-ROM/
!!! beware it does not describe a procedure specific for the Polaris . !!!
Have fun.
hartstikke bedankt
can someone with the (original) dutch version check what their spl number is if its still not hardspl-ed?
(hold camera button and press the reset button while still holdhing camera button)
I've managed to made a flashable Dutch rom. I've used the original WWE ruu_signed.nbh as donor and the files from Session. But although it's working, there are many things not installed: HTC Home as well as several icons are missing in the settings.
The new ruu_signed.nbh is about 17Mb smaller then the donor. If I extract the wwe nbh file it also produces a 17mb unknown.nb file. How can I add this to the os-new.bin? Using nbmerge didn't worked (i might be doing something wrong though).
tamAyT said:
I've managed to made a flashable Dutch rom. I've used the original WWE ruu_signed.nbh as donor and the files from Session. But although it's working, there are many things not installed: HTC Home as well as several icons are missing in the settings.
The new ruu_signed.nbh is about 17Mb smaller then the donor. If I extract the wwe nbh file it also produces a 17mb unknown.nb file. How can I add this to the os-new.bin? Using nbmerge didn't worked (i might be doing something wrong though).
Click to expand...
Click to collapse
Strange.
I also have the HTC Home problem (reinstalled HTC Home, problem gone). No icons missing as far as i can tell.
The HTC Home problem also exists in other custom ROMS I tried (WWE WM6.1).
But the WM6.0 NL ROM is slow as hell compared to a WM6.0 WWE.
Maybe an experienced cook can help us with this. I only tried one weekend and got this far.
tamAyT said:
can someone with the (original) dutch version check what their spl number is if its still not hardspl-ed?
(hold camera button and press the reset button while still holdhing camera button)
Click to expand...
Click to collapse
SPL-1.25.0000
CPLD-2
session said:
Strange.
I also have the HTC Home problem (reinstalled HTC Home, problem gone). No icons missing as far as i can tell.
The HTC Home problem also exists in other custom ROMS I tried (WWE WM6.1).
But the WM6.0 NL ROM is slow as hell compared to a WM6.0 WWE.
Maybe an experienced cook can help us with this. I only tried one weekend and got this far.
Click to expand...
Click to collapse
So you're missing the HTC Home to by default. And the icons I'm missing for instance is for example 'Device Information' (but then the Dutch translation of course).
Heeleven: thanks for the info
Any news about a flashable dutch rom?
Yzord said:
Any news about a flashable dutch rom?
Click to expand...
Click to collapse
The Dutch Rom Flashable is here: This one is the Original
http://rapidshare.com/files/96783810/Dutch_Dump.rar.html
I was unable to post my rom to the xda ftp site.
Somehow the ftp is broken and I can't log in properly. When that's done I'll post the latest rom image I pulled out of my device about a week ago.
Rom version I have is 1.27.405.1 NLD
Rroet
Dumped the rom to Rapidshare because ftp of xda seems to be broken.
Rom 1.27.405.1 NLD
Rroet said:
Dumped the rom to Rapidshare because ftp of xda seems to be broken.
Rom 1.27.405.1 NLD
Click to expand...
Click to collapse
Did you dump this rom before or after you were getting reception difficulties?
Hi,
With my official european french rom the cruise recognize my phone operator when turning it on after an hard reset; it automatically sets up the right settings for mms, edge and data connection (my operator is SWISSCOM)
What if I install one of the cooked rom from this forum, will this still happen?
If no where can I find the software that installs theses settings?
Thanks a lot for helping
Dag
On swisscom I use Setup Operator - works fine for me.
BTW I have not branded Polaris and after first start swisscom send me all configuration data.
The original Xda orbit 2 ROM for example has the connection wizard removed. It can be added through a CAB though.
All of the cooked ROMs I tried (almost all of them ) feature the connection wizard.
Excellent and thanks a lot!
Wich one of the coooked rom do you find the most stable / are you using?
I have Bepe's Rom and Swisscom... Works great!
Roman
I'm using bepes WM6.1 too. Build .58 (most recent), the full edition, German language version. So bepe WM6.1 .58 FULL GER.
It suits my needs perfectly and of all the ROMs I tried, I found it to be the one coming from an experienced cook. Unlike some of the ROMs out there it's very useful put together and in harmony with the devices possibilities. It's very fast and very stable.
lazik said:
On swisscom I use Setup Operator - works fine for me.
Click to expand...
Click to collapse
Same for me, Setup Operator works fine.
udK said:
Same for me, Setup Operator works fine.
Click to expand...
Click to collapse
Yes, Setup Operator work for general purpose, but don't work for LiveTV...
Is there a .cab for Swisscom LiveTV does? Thank you in advance for your response
schaggo said:
I'm using bepes WM6.1 too. Build .58 (most recent), the full edition, German language version. So bepe WM6.1 .58 FULL GER.
It suits my needs perfectly and of all the ROMs I tried, I found it to be the one coming from an experienced cook. Unlike some of the ROMs out there it's very useful put together and in harmony with the devices possibilities. It's very fast and very stable.
Click to expand...
Click to collapse
Can you tell me more about battery life and bepe rom !
Now with my official WM6 french rom with phone in standby, no sms, no mms, no wifi or gps , just standby I get 40 hours and then my battery goes to 0%.
Is it better with bepe?
Can we install (eg. with a .cab file) the new Manila 2D (see attach picture - Weather/Flipclock) on our orginal WM6.1 ROM ?
Hello Treo, try this thread.....http://forum.xda-developers.com/showthread.php?t=541750
It will work. However I would recommend you to install first hard SPL and than a new WM 6.5 rom with this theme.......is much more complete, smoother and functional....
succes.
Frank C.
it doesn't work!
Frank Caarls said:
Hello Treo, try this thread.....http://forum.xda-developers.com/showthread.php?t=541750
It will work. However I would recommend you to install first hard SPL and than a new WM 6.5 rom with this theme.......is much more complete, smoother and functional....
succes.
Frank C.
Click to expand...
Click to collapse
it doesn't work!!!! i try it right now...
i can't change original rom before a year because i could lose italian guarantee...
The thread is verry confusing me and it isn't entirely coordinated on the Iolite.
When I update a non-HTC ROM I will lose the guarantee, So I preffer an installation of Manila with a kind of .cab file.
After you install the HardSPL, you can always restore the original SPL to your device, if you have an issue with it... And then send it back for guarantee...
Blubster said:
After you install the HardSPL, you can always restore the original SPL to your device, if you have an issue with it... And then send it back for guarantee...
Click to expand...
Click to collapse
But how to restore our stock rom ?
You can dump it from your device before you flash a custom rom, and then rebuild a "stock" rom with the dumps with ervius kitchen...
Then if you need to send it back for warranty, you can flash the stock rom, then the stock spl, and you are good to go!
That is IF you can flash back, ie your screen and your usb port are still working...
I have this running and it works fine, the only problem is that the default blue O2 background is still behind the flip clock. Any ideas how this can be fixed???
Mark
rorrism said:
I have this running and it works fine, the only problem is that the default blue O2 background is still behind the flip clock. Any ideas how this can be fixed???
Mark
Click to expand...
Click to collapse
How and what did you installed ?
Dear All
Link updated.....Solved the error of ONBL
I am Tahir, an OPAL owner from India
To all the OPAL lovers here I present my first 6.5 ROM based on build 21889
I know its a quite old build now, but I liked it the most & have been testing it for past 10 days
My special thanks to my friend Sumit also K/as Krazy about Technology from Gene forum who is my Guru to this windows mobile world. he has been a tremendous support to me for all my queries & setting up the basics for this ROM.
Some of the EXT packages & folder customization have taken from Sumit's ROM for Gene.....by the way I myself own a New Gene
This ROM is free of bugs to my best knowledge rest I leave to you all my freinds
Feedback is most awaited & I hope you would like this release
Feature
- Based on original stock ROM of OPAL OS version 1.35.0.0
- EXT replaced with Mega ROM to reasonable extent
- With all stock drivers from OPAL
- Highly stable....( although you people will give more feedback)
- Unlike other ROMs, home settings tab now working fine
- Customized folder & few apps taken from Sumits ROM have been added...Thanks to Sumit
- Plain Winmo 6.5 look....no customization
- Registry tweaked to enhance battery life
- 65-69 Mb free RAM at startup & 128 Mb device storage
- Soft key menus & selection bars specially edited to make them more finger friendly
- Idea Operator flash logo removed...( as its irritating for people abroad)
- List of packages included
AdobePDF
Advanced_Configuration_Tool_v3_3
HTC Album
Arcsoft_MMS
AudioBooster
AudioManager
Battery Tweaks
BootLauncher
ClearTemp
GoogleMaps
JBed_3dMod
LockStreamDRM_1_1_080625_O9_02=True§
EzInput_Western
PhoneCanvas
PictureEnhancement
PIM_Backup_Dotfred
RandomAccess
RingtonePlugin
RSSHub_2_1_1_1069_00=True§
SecurityWarningOff=True§
Settings+=True§
ShareDLL_2.0.070522.0000=True§
SKTSync
SmallUtils
StreamingMedia
TaskManager
UCWeb_Browser V6.3
USBToPCPopUp
VoiceRecorder
XDAShutdown
YouTube
Zip
And many more....
Guidelines for flashing
Although it does not require different flashing procedure but I thought its better to avoid any mishap
*flash it using RUU available for OPAL
* after flashing wait for few minutes & then proceed to Screen alignment, it will help to avoid lagging in screen cursor
*Set the time zone, tap on screen for completion
* then the phone would go for customization, please don't stop it by any means. It is not OEM customization, it install few registry settings setting provided by some great chefs at XDA
* let the customization complete, be patient it may take more than 6-7 minutes
*After the device restarts, again do a soft reset
* some users may encounter the problem of home settings not working after loading msgs & contacts...buts it tempoarary problem...soft reset your device it will work
Now ur phone is ready to use
Give your feedback
Links: http://www.4shared.com/file/WmQqnrtp/ruu_signed.html
please post some screenshots, did you include EzInput ?
xtitan said:
please post some screenshots, did you include EzInput ?
Click to expand...
Click to collapse
Screen shots not required as it a deflaut winmo 6.5 ROM, no extra themes
All original grphics available in winmo 6.5
Ezinput is included....
Nice imblfmstr, congrats.
I can't try as you know my slow internet. But iam sure it will be nice. Btw my wm 6.5 version on the way.
I will sure try it
jagan2 said:
Nice imblfmstr, congrats.
I can't try as you know my slow internet. But iam sure it will be nice. Btw my wm 6.5 version on the way.
Click to expand...
Click to collapse
Thanks Jagan
I will sure try ur ROM, My office internet is too good....fingers crossed
I hope the ROM will be up today, so that I can download it tomorrow
By the way can u sent me the list of ur EXT in text file, my manilla2d is not working just wanted to confirm what all packages are required additonal
I haven't cooked m2d yet when i cook i will send you the list, and yes some packages are essential to make m2d work.
Please help, my Opal has ONBL 1.27.0000, SPL 1.26.cmon
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
xtitan said:
Please help, my Opal has ONBL 1.27.0000, SPL 1.26.cmon
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
Click to expand...
Click to collapse
Sorry dear I think the data you have given is not correct
your SPL should be 2.00.cmon, Just check in the forum for hard SPL thread if you can upgrade to 2.00.cmon
By the way my device has ONBL 1.35.0000 and I have cooked this ROM with stock ROM from my phone...so might be compatibility issue because higher version on ONBL
imblfmstr said:
Sorry dear I think the data you have given is not correct
your SPL should be 2.00.cmon, Just check in the forum for hard SPL thread if you can upgrade to 2.00.cmon
By the way my device has ONBL 1.35.0000 and I have cooked this ROM with stock ROM from my phone...so might be compatibility issue because higher version on ONBL
Click to expand...
Click to collapse
imblfmstr while cooking you included, onbl too?
If yes remove it, problem would get solved i think. Btw just using indian stock rom drivers wont creat prob coz i have once tried to use spanish stock rom driver and it worked fine.
jagan2 said:
imblfmstr while cooking you included, onbl too?
If yes remove it, problem would get solved i think. Btw just using indian stock rom drivers wont creat prob coz i have once tried to use spanish stock rom driver and it worked fine.
Click to expand...
Click to collapse
I don't know how to remove ONBL....
If u can tell...I will recook
This ROM is working awesome on my phone....I am very happy with this
Its just like official Upgrade....no glitches...no errors...
absolutely fantastic...even I could not believe how I did this....
imblfmstr said:
I don't know how to remove ONBL....
If u can tell...I will recook
This ROM is working awesome on my phone....I am very happy with this
Its just like official Upgrade....no glitches...no errors...
absolutely fantastic...even I could not believe how I did this....
Click to expand...
Click to collapse
i think onbl 1.35 work fine with those who have stock onbl 1.27
myself use onbl 1.27 on my stock onbl 1.35.0000
when you flash rom with onbl 1.35 your onbl that is 1.27 will change to 1.35.0000
Bug...
I have the error "Your OS ROM isn't customized for your hardware", with SPL 2.00.cmon...
Tuxologue said:
I have the error "Your OS ROM isn't customized for your hardware", with SPL 2.00.cmon...
Click to expand...
Click to collapse
also happened to me
Its working fine with me
aidinvm_ultimate said:
also happened to me
Click to expand...
Click to collapse
I don't know why its happening with you guys.....
Mine is working absolutely fine & superb battery life...
will look into it...might the the ONBL problem as said by Jagan
@jagan...if u can pls suggest buddy...
@imblfmstr: Okay do one thing download this.
Then open your rom in that editor, then u delete everything except the os part thats it.
jagan2 said:
@imblfmstr: Okay do one thing download this.
Then open your rom in that editor, then u delete everything except the os part thats it.
Click to expand...
Click to collapse
Thanks Jagan will try this...
ONBL 1.35
Can someone post onbl 1.35 for download?
Not working
imblfmstr said:
Thanks Jagan will try this...
Click to expand...
Click to collapse
Sorry Jagan....nothing is shown wen i open the ROM with this app
Great ROM
Hi Tahir ( imblfmstr ),
This is really a very nice ROM. Initially it felt bit slow but after 3 to 4 Soft resets this problem was solved. Now the ROM is fast and battery life is very good.
Is it possible to cook a ROM like this for 6.5.3 (The one with Start Icon at the bottom). I feel 6.5.3 is more finger friently.
Thanks for the nice ROM. Waiting for your next 6.5.3 ROM .
mail2eswar said:
Hi Tahir ( imblfmstr ),
This is really a very nice ROM. Initially it felt bit slow but after 3 to 4 Soft resets this problem was solved. Now the ROM is fast and battery life is very good.
Is it possible to cook a ROM like this for 6.5.3 (The one with Start Icon at the bottom). I feel 6.5.3 is more finger friently.
Thanks for the nice ROM. Waiting for your next 6.5.3 ROM .
Click to expand...
Click to collapse
Thanks buddy.....
It takes 3-4 soft reset to make it smooth because I have included 5 different sets of registry tweaks made by some great XDA developers....intially it takes time to make the changes...