I have a little project in mind, but would like some input from the pros to cut research time:
Is it possible to "wrap" a Today plugin dll with another, providing a "pass through" for operations (such as screen taps, etc)?
What I'm trying to accomplish is this: Add selectability and other one-handed d-pad operation to an older plugin that is not selectable.
What do you think?
it's possible but the problem is that the plugin have to keep track on what plugins it include and which handles it have to pass to them
could end up big and slow
Rudegar said:
it's possible but the problem is that the plugin have to keep track on what plugins it include and which handles it have to pass to them
could end up big and slow
Click to expand...
Click to collapse
This is specific to a single plugin - it would only keep track of one.
Perhaps plan B would be easier - a plugin that manipulates another plugin. Such that it would "appear" the older plugin was selected, etc. I guess I'd better go study some more...
Actually its really simple.
Any plug-in DLL exports a function called InitCustomItem. In this function the plug-in does all its initialization, and creates its window. The return value is the handle to this window which you can subclass to add functionality.
as for selection, there is a value in the registry for each plug-in (HKLM\Software\Microsoft\Today\Items) which controls whether the system passes selection events to the plug-in or not.
it has three settings:
0 - non selectable, item will be skipped by the system.
1 - Automatic, the system will paint the item and handle selection on / off
2 - Manual, the system will pass the selection event to the item and the item will take care of the rest. In this mode the return value of the WM_ACTION determines whether the selection is moving on. This is good for multiline plug-ins that don't want to give up focus when arrow keys are pressed.
levenum said:
Actually its really simple.
Any plug-in DLL exports a function called InitCustomItem. In this function the plug-in does all its initialization, and creates its window. The return value is the handle to this window which you can subclass to add functionality.
as for selection, there is a value in the registry for each plug-in (HKLM\Software\Microsoft\Today\Items) which controls whether the system passes selection events to the plug-in or not.
it has three settings:
0 - non selectable, item will be skipped by the system.
1 - Automatic, the system will paint the item and handle selection on / off
2 - Manual, the system will pass the selection event to the item and the item will take care of the rest. In this mode the return value of the WM_ACTION determines whether the selection is moving on. This is good for multiline plug-ins that don't want to give up focus when arrow keys are pressed.
Click to expand...
Click to collapse
Hey, thanks for the response! I've set the Selectability registry item for the older plugin, and it's ignoring it - that's what started me on this little project.
I'm a software developer by trade, but not with C++, so I don't want to waste people's time here asking a lot of dumb questions. If you could point me in the right direction on a couple of things, I'll go off and learn:
1. If all I have is a dll and nothing else (no .defs, etc), can I determine all of the functions it exports (other than InitCustomItem)?
2. Process check: My custom plugin's InitCustomItem would call old-plugin's InitCustomItem, snagging old-plug's hwnd. New-plugin would then initialize it's own window - transparent(?) and pass that hwnd back to windows. Also, my custom plugin would pass all messages to old-plugin, etc. Theoretically, old-plug would look and operate like normal?
If this is already written, just sent me the code!
Well I am afraid it will be difficult to do all this without C++. As far as WM based devices are concerned you need to use something that translates in to native code to create system components like the plugins son ,no .NET languages, and embedded VB doesn't do well on anything never that WM 2003 (not even SE), plus I am not sure if you can make DLLs with it at all.
To your questions:
1) There is a tool which comes with VS 6 called Dependency Walker. It shows you what functions a given DLL exports, what it imports from other DLLs and what DLLs it is link to. Woks on EXE files as well.
If you can't get that, download a demo of IDA 5. It's the most powerful disassembler for WM devices out there.
2) Not sure, I never tried anything like that. The thing is, the system resizes the plugins, on initialization (it controls height) and when screen rotation changes so if you pass back HWND for a window other than the one visible, it might cause some problems.
I think what you should do is learn about subclassing. It's when you replace the procedure of an existing window with your own (just replace the function, not create new window). You then get all the messages for that window, you can do what you want and call the original function when you done.
By the way, if you want to learn about writing plugins there is an article with code samples on this site: www.pocketpcdn.com and a lot of other interesting stuff.
Good luck.
What plugin is it? It might be easiest just to rewrite the plugin if you've got the code.
V
levenum said:
Well I am afraid it will be difficult to do all this without C++.
Click to expand...
Click to collapse
I should have been more clear - I am using C++, I'm just have to learn how to program with it first!
vijay555 said:
What plugin is it? It might be easiest just to rewrite the plugin if you've got the code.
V
Click to expand...
Click to collapse
I don't have the old-plugin source code. My little project is to add some sort of d-pad operation to the WeatherPanel plugin, which you're probably familiar with.
Progress: I've written and deployed my first little plugin - based on the source code samples available in the internet.
Next step: In my InitializeCustomItem, I thought I'd try to call WeatherPanel's InitializeCustomItem (instead of creating my own window). Thing is, I don't yet know how to properly link the WeatherPanel dll to my project. As expected, it only exports two functions: InitializeCustomItem and CustomItemOptionsDlgProc (I used dumpbin.exe)
I'll keep plugging away - any input would be appreciated.
Thanks for your help!
It's real easy:
Use LoadLibrary and GetProcAddress functions to call functions in other DLLs without linking them.
levenum said:
It's real easy:
Use LoadLibrary and GetProcAddress functions to call functions in other DLLs without linking them.
Click to expand...
Click to collapse
What a coincidence! My studying led me to the same functions.
From within my plugin's InitializeCustomItem, I was able to successfully load the dll with LoadLibrayl, GepProcAddress of its InitializeCustomeItem (at ordinal 240) and call it. But it whacks the Today screen so that none of the plugins load.
Next I thought I'd try FindWindow and EnumChildWindows to find it and all it's children. Then manipulate them by sending messages...
storyr said:
What a coincidence! My studying led me to the same functions.
From within my plugin's InitializeCustomItem, I was able to successfully load the dll with LoadLibrayl, GepProcAddress of its InitializeCustomeItem (at ordinal 240) and call it. But it whacks the Today screen so that none of the plugins load.
Next I thought I'd try FindWindow and EnumChildWindows to find it and all it's children. Then manipulate them by sending messages...
Click to expand...
Click to collapse
Update: So far, so good. As it turns out, EnumChildWindows doesn't work on the PPC, so I used GetWindow to find the plugin's handle. I can successfully send messages to it and initiate various actions.
Question: I'd like to visually indicate (on the old-plugin) what's being clicked (such as drawing a box around it). Is it possible to draw things outside of my own window?
It is, but it's tricky.
You can always use the GetDC function to retrieve the DC for another window and paint on it, but the problem is that unless you subclass the window you have no way of knowing when it repaints it self and all your changes are erased.
levenum said:
It is, but it's tricky.
You can always use the GetDC function to retrieve the DC for another window and paint on it, but the problem is that unless you subclass the window you have no way of knowing when it repaints it self and all your changes are erased.
Click to expand...
Click to collapse
I tried that exact thing (GetDC) and drew a rectangle in it, but it didn't do anything. I realized the reason was the WM_Paint event wasn't firing on old-plugin, and when it did, my stuff was erased (just like you said).
Next idea - open my own dialog window than overlays old-plug. The entire window needs to be transparent - except for the visual indicators that I position where I want. When the user ok's, I close the window and send the click to old-plugin...
Thanks again for keeping tabs on my progress..
No offence, but with all these rather advanced programming tricks you are attempting just to "sup up" an old weather plugin it looks to me like you would be better off just writing the whole thing from scratch.
It you are familiar with WinInet and / or sockets this should be pretty easy and it will look and work much better than the hack you are attempting now.
Plus you can make it exactly the way you like.
levenum said:
No offence, but with all these rather advanced programming tricks you are attempting just to "sup up" an old weather plugin it looks to me like you would be better off just writing the whole thing from scratch.
It you are familiar with WinInet and / or sockets this should be pretty easy and it will look and work much better than the hack you are attempting now.
Plus you can make it exactly the way you like.
Click to expand...
Click to collapse
No offence taken. I thought of that, but I figured this would be a good way to cut my teeth a little. Once I complete this little project, I may pursue that route...
Question: Do you have a favorite forum (or forums) besides this site that you use for your research/programming questions?
This is my favorite forum
But here are couple more sites I found very valuable:
www.pocketpcdn.com - They have tips and tricks with code examples arranged in categories like how to make MFC dialogs not full screen or the one I used in LVMTime to put the clock back on the taskbar.
www.codeproject.com - It's not specific to WM development but has tons of interesting stuff including entire sources.
You should also check out www.buzdev.net If you're not familiar with the great work of buzz_lightyear you should see some of the stuff he did for this forum like grab_it - the invisible ROM dumper.
OT
Just a quick OT question:
If I would move some of the plugin-dll's from \Windows to \Storage Card, would it be enough to change the adress within the corresponding item in the registry entry HKLM/Software/Microsoft/Today/Items ?
Of course I'm not talking about plugins like tasks a.s.o but rather third party plugins
Cheers
hrb
It won't work.
The problem is that the SD card is mounted too late so if you put the plugins on it they will not be loaded when device boots up.
You can move them to the extended ROM this way or to a folder other than windows but there is no way to move start-up stuff to SD.
Thanks for the help with this "little" project. After many hours, the product is out for beta testing. When it's released, I'll post more info...
Finished!
It's finished. The app is called WP-Pilot and it provides one-handed operation of WeatherPanel. If anyone's interested, it can be found here. Here's how it ended up:
There's a plugin (WP-PilotPlugin.dll) with an options dialog, and an executable (WP-Pilot.exe).
When the plugin gets selected, it looks for Weatherpanel. If it finds it, it fires off WP-Pilot.exe
WP-Pilot.exe opens. It does this stuff:
Look for WeatherPanel, and get it's screen coordinates.
Read the registry and determine which layout file WeatherPanel is using.
Open the layout file and read it: Record the coordinates of each "clickable" item found. This was a real PITA because of Unicode.
Sort the coordinates for left-to-right, top-to-bottom order.
Select the first coordinate and position a tiny window (10x10) at that x-y position.
Draw a "pointer" in the window (the type and color depends on what's selected in the options).
Show the window and process input:
[*]Left/right pressed - selected the next/previous coordinate and move the window to that location.
[*]Up/down pressed - close WP-Pilot and tell the plugin we're done.
[*]Center button pushed:
[*]Send a mouse click to the WeatherPanel plugin at the coordinates
[*]Close WP-Pilot and tell the plugin we're done.
Thanks again for your help!
I'm looking for a way (programmatic, registry, whatever) to enter numbers, *, etc. on the today page without having the phone interface automatically appear. It seems like this should be easy, but I haven't found it with a lot of googling.
thanks.
Sorry, I meant to put this in a different thread. I'll move it there.
maybe the application can be called with arguments being the nr or the contact struct ?
I am planning to write a today plugin or service that will prompt me if the number of processes are larger than a specific number, so that I can close any active program before it is killed by the OS deliberately.
Anyone can give me an idea? is it possible by today plugin and can I trap the event like creating process so I can check the number of processes? Thanks
Probably you should start telling others what software are you intended to use for the program.. and possilby your current ppc programming level (i.e. have you written any ppc software etc).
Actually trapping (hooking) CreateProcess would be tricky mamiac (hope I spelled it correctly) has some code on this here somewhere.
Simply getting a number of processes is relatively easy. Just do a search on "ToolHelp" APIs and you will find what you need.
If you are looking for a C++ example of a today plugin check out the RegDisplay link in my signature.
Thanks. I'll have a look at it.
Hi All,
(I have already searched the forums and couldn't find a thread which is why I'm posting here)
I have a t-mobile HD2 (energy ROM 29020 build (in case anyone is wondering)) and I'd like to be able to set the following:
When viewing Notes or Office Word & Excel files - I want to be able to permanently sort by Type instead of the default of Name. Every time I set the sort by to Type - whenever I soft reset or even exit any of the above applications the sorting defaults back to Name instead of keeping my selection of Type
In File Explorer - my sorting choices remain the same no matter if I shut down, soft reset, exit the application etc.
I tried searching in the registry but couldn't file the exact key (I was using broad search terms such as Sort, Type, Sort By, etc.) Any tips would be greatly appreciated!
I can upload a picture if that helps - but I hope I was descriptive enough for all to understand my issue. Thank you!!
rob.allen78 said:
Hi All,
(I have already searched the forums and couldn't find a thread which is why I'm posting here)
I have a t-mobile HD2 (energy ROM 29020 build (in case anyone is wondering)) and I'd like to be able to set the following:
When viewing Notes or Office Word & Excel files - I want to be able to permanently sort by Type instead of the default of Name. Every time I set the sort by to Type - whenever I soft reset or even exit any of the above applications the sorting defaults back to Name instead of keeping my selection of Type
In File Explorer - my sorting choices remain the same no matter if I shut down, soft reset, exit the application etc.
I tried searching in the registry but couldn't file the exact key (I was using broad search terms such as Sort, Type, Sort By, etc.) Any tips would be greatly appreciated!
I can upload a picture if that helps - but I hope I was descriptive enough for all to understand my issue. Thank you!!
Click to expand...
Click to collapse
Just wanted to see if anyone has any updates for this. Trying to keep it at the top of the list for a fresh set of views and ideas.
Thanks everyone!