Hello Everybody,
My VGA screen give me a lot of problems. I've installed Slide 2 Unlock2 but pictures are really bad and I would to know if you have a solution for me. I try to modify pictures on Adobe photoshop but it's always bad...
Thanks
Terra
You really should post in the main thread but you can't use windows contacts or outlook to set contact pictures, you need a program like HTC Camera Album or PocketCM to set the contact pictures. You should also make sure the images are the correct resolution for your screen.
Please post in the main thread!!!!!!!
Related
Hey Guys,
i´d like to know how i can make the pictures bigger. (I mean in general not icontact, they will be zoomed in S2U...)
I mean, the small outlook picture is normally zoomed to fit the screen, is any kind of possibility to replace it with a big one?
Greets
Maeffjus
As you said the programs managed the size of the pictures, like S2U2.
Most of the programs have standard sizes for the pictures, so you cant change anything.
In general I would post such request in each thread of the applications
you would like to have a bigger picture.
It would make more sense.
Here nobody can help you, I gues.
good luck.
Maeffjus said:
Hey Guys,
i´d like to know how i can make the pictures bigger. (I mean in general not icontact, they will be zoomed in S2U...)
I mean, the small outlook picture is normally zoomed to fit the screen, is any kind of possibility to replace it with a big one?
Greets
Maeffjus
Click to expand...
Click to collapse
It sounds like you assigned picture to your contact in Poutlook. If you use s2v to assign contact picture then you can have the big pictures.
Which image size do you use for the pictures of a contact ?
I tried almost every combination but the picture of a contact/people in the Touch Flo 3d still remains of poor quality .
BerreZ said:
Which image size do you use for the pictures of a contact ?
I tried almost every combination but the picture of a contact/people in the Touch Flo 3d still remains of poor quality .
Click to expand...
Click to collapse
I was about to start a thread about this too. The biggest pain is that there is no sample picture you can use to make your own pictures the same size. Does anyone know the answer?
256x256px 72dpi
BerreZ said:
Which image size do you use for the pictures of a contact ?
I tried almost every combination but the picture of a contact/people in the Touch Flo 3d still remains of poor quality .
Click to expand...
Click to collapse
After some research I found it. The resolution is 256x256. I use a PNG, but jpg works as well. I found out by looking at one of the avatars you can use when you have no picture of your own. Now the contacts picture looks perfect
david-v said:
After some research I found it. The resolution is 256x256. I use a PNG, but jpg works as well. I found out by looking at one of the avatars you can use when you have no picture of your own. Now the contacts picture looks perfect
Click to expand...
Click to collapse
How do you do it?
Take a pic of the person, crop the wanted part and downsize it?
Yes,
that's what I will do.
I will replace all of my contact photo's in Outlook that way.
Ofiaich
david-v said:
After some research I found it. The resolution is 256x256. I use a PNG, but jpg works as well. I found out by looking at one of the avatars you can use when you have no picture of your own. Now the contacts picture looks perfect
Click to expand...
Click to collapse
Perfect??
I'm using a 256x256 JPG or PNG as well at 300 dpi...and it is still poor...
?
Ok I tried it . The result is better but still far from perfect.
Does someone has another idea ?
I´ve heard, but not tested, that you could use S2V (Slide to view) to add contacts´ picture without downsizing to low resolution.
If anyone tries it and works, tell us here.
Could someone post how contact picutes look like on the HD so we can see whats you mean when you say its bad quality...
Thanks!
Thanks
Thanks HelderJr I tried 2SV and that worked perfectly.
There is a setting when taking pictures with your phones camera to take contact pictures.. also for some strange reason when you use the pictures and videos program to add a photo in your library as a contact image the quality looks like crap. What looks best to me on the touch pro is open the Album program and add an image to a contact from inside the program. The contact picture quality looks much better.
Now this could turn out different on the Touch HD, but it works like this on my Touch Pro.
The thing that I dont like with TouchFlo 3D Photo Contact ... There is no standard "matrix" view of the photo contacts, for example 5 x n number of photos.
With TouchFlo 3D, we need to scroll to the correct photo and take action.
It is nice to see that 3D animation, but it is better to have an option for the user interface like the old HTC HOME.
Correction
2SV does the job. But !!!!!!!!!
Touch Flo 3d became extremely slow especially when reaching the tab "PEOPLE" and even crash down . Has to perform a soft reset and then 2SV doen't seem to work anymore.
So back to first question .
recorrection
UTVOL has it right.
Using the album(program) to assign a picture to a contact does almost the job.
Picture quality in tab "People" is largely improved but still not perfect.
asci said:
Perfect??
I'm using a 256x256 JPG or PNG as well at 300 dpi...and it is still poor...
Click to expand...
Click to collapse
... i think you must save in 72 dpi to avoid resizing by the HD ... in 300 dpi, there is a resize to web definition.... i 'm currently trying becaus ei have same problem, ...i will post the answer later ...hope it works.
Charles
Add photos from Album
Hi, try to add photos to your contacts from Album application
the difference is tremendous ... see samples:
1. foto used in both tries
2. set in outlook and synced via activesync
3. viewed with touch hd fotoviewer and saved to contact
so are you saying we should use 446 x 446 res?
tboy2000 said:
so are you saying we should use 446 x 446 res?
Click to expand...
Click to collapse
No!
256x256 pix. but you need to set it from the phone. Copy the picture to device, open it and set to contact. Outlook will blurr it.
I transfered all of my contacts and contact pictures over from my blackjack 2 to my X1. I installed TF3d, and the contact pictures are very low quality looking. But to get them to have a high quality look, u have to change the picture from within TF3D itself. So being that I don't have these pictures saved to my phone anymore, I would like to know where contact pictures are stored on the X1 (since the contact pictures still do exist somewhere) ?
inside the contact itself i think.
but thats not a problem of the contact pictures itself, its a problem of TF3D. it scales all thos pictures down (and looses tons of quality) unless they have a certain format / size.
it's not a problem with TF3d It's a problem with outlook, it only saves very low-res images within the contact database.
far too low a resolution to appear at a decent quality on our gorgeous Hi-res screens, after all these images are according to MS supposed to be a tiny thumbnail..
If you have Hi-res images on the blackjack then dump them to a folder, and load them from there. If not then I'm afraid you'll have to do what I did. Get new photos..
if thats true, how comes that the Contact pictures of my Mates touch HD are sooo much better!?
achmed20 said:
if thats true, how comes that the Contact pictures of my Mates touch HD are sooo much better!?
Click to expand...
Click to collapse
Did he upgrade them off another device?
If not then that's probably why, the ones I transferred across from my uni via the athena are really low quality.But the ones off the X1 are fine.
But I've had most of them for so long I've got so used to them that I couldn't get on with some changed ones.
nope! not upgraded!
just did a test with his phone. i ordered him to do a picture in the Contact size (240x320) and snd it to me.
i made a contact pic out of it and is definitely of better quality.
go try it yourself. (attachment)
maybe not TF3D related, but downscaling is the problem.
if it was a tf3d problem then his image would be poor!
fards said:
if it was a tf3d problem then his image would be poor!
Click to expand...
Click to collapse
edited my text allready ^^
try saving a pic as a contact using S2V then sync with a pc.
do a contact backup with ppcpimbackup to be on the safe side
disconnect activesync, delete the entire contacts database, (can use sktools for this or ppcpimbackup)
then sync again and see what happens to the hires contact pic.
I've found that the image comes back lowres, ergo it's outlook that reduces the image quality.
[EDIT]
Having tested this in orifice 2007 at work, it didn't reduce the quality. so maybe it's only older versions that did?
simple solution for the blurry pictures!
open the PIC in HTC album, open options and choose "save to contact".
this seems to bypass the Outlook compression function.
All I do with mine is save them to a folder I made on my Memory Card. Then when I open the contacts list choose a picture, find it, attach it and jobs a good one. Very good quality too...
I've been searching for an answer to this question for a while with no luck so far.
Outlook 2003 has a placeholder for a photo on each contact's details page. This picture can be used in the People tab on the Touch HD.
What is the ideal specification for such a picture (resolution and actual size)?
It may be obvious to others but it isn't to me!
TIA
I don't know what the optimum size is, but if you add the contact photo from within the contacts app it will be small and at low resolution.
The best option for me is to resize the desired image to the same size as the screen and then add it to a contact from A_C's S2V program. This then allows a full screen photo for caller ID with another of A_Cs programs S2U2. This works fine on my Kaiser and I see no reason it wont work on my Blackstone when it finally arrives.
Hope this helps.
i just got my touch hd yesterday and i instantly had to figure out the same problem.
i recommend to sync all your contact with your pc and then add the pictures later at the "people tab" on your device.
anyways,
the contact pictures in the "people tab" are 268x268 pixels.
that works pretty good, just try it.
Most people seem to agree 256x256 is the best resolution to use, however if you import the picture from Outlook it'll be horrible quality no matter what the original resolution was.
You need to select the picture from TouchFlo on the contacts tab to get the best quality (which still isn't fantastic).
some clues here:
http://forum.xda-developers.com/showpost.php?p=3388796&postcount=100
Is it still 256x256 in PNG format for HTC Sense ?
Try 400x400 pixel size. I use a 400x400 JPG and work fine for me.
oxygen2k said:
anyways,
the contact pictures in the "people tab" are 268x268 pixels.
that works pretty good, just try it.
Click to expand...
Click to collapse
Should have read up higher. I can confirm that is still the exact resolution for HTC Sense.
All,
Can anyone help me here? I am trying to figure out the idea size of a picture for a contact in Outlook that will look best in the Sense UI. Anyone know? The contact pics that are picked up from face book look great, the ones I created look like crap. What is the trick here? Thanks!
Yes I have wondered this as well, I dont use the favorites tab b/c of this, every pic I have is blurry.
Anyone know?
A lot of views but no answers...anyone?
200x200 pixels
Try 200x200 pixels.
Use S2V (freeware) to assign pics to contacts. I always create 300x300 jpeg pictures (for future use). After you assigned the contacts they will also sync just fine with Outlook.
Even full screen caller ID's look wonderful!
S2V
Thanks that works well.