I removed minimo from my vario2 after finding it very sluggish. when installed it asked if I wanted to set it as default browser and I said yes. now if I click on a hyperlink in an email IE won't open it because of a security error. something about trusted. any ideas how I can get it back as I do not seem to have any sort of registry editor. had a look at all the ie settings I can find, but no joy. if I need to install one can I download one as a cab file as active sync messed my pc up! cheers in advance you ever helpful souls!
timbouk said:
I removed minimo from my vario2 after finding it very sluggish. when installed it asked if I wanted to set it as default browser and I said yes. now if I click on a hyperlink in an email IE won't open it because of a security error. something about trusted.
Click to expand...
Click to collapse
Please follow my articles: this is a very common problem under WM5 I've often elaborated on (e.g. at http://www.pocketpcmag.com/blogs/in..._the_flaky_file_associat&more=1&c=1&tb=1&pb=1 ) . It's in no way a security error: the system just doesn't find the target app.
You only need to restore the file extension assignments with for example http://www.winmobiletech.com/sekalaiset/RevertOperaAssignments.reg
Super, that looks like the exact problem. I have been looking for a registry editor that I can download as a direct cab file, I still have not found one; have you any links?
Thanks very much so far
Hello,
I have upgraded my Swedish P3600 from Brightpoint.se and I just figured the HTC Streaming Media is not working. I am on the Swedish 3 operator and before flashing the latest official firmware I had the Streaming Media working like charm by installing the app from this forum and renaming the language .mui files for english menus.
Now i cannot seem to get this going after the flash and using the included version of the same SM app i had before. VERY annoying!
When following a rtsp-link in PIE the SM player is started and says "Connecting..." for about 10 seconds and then there's an error saying "There was no network" (translated from Swedish). I am connected with HSDPA and i have also tried with plain 3G and WiFi. I have no other problems when it comes to data call, the internet sharing works like charm and so does all other applications.
Streaming radio channels are working through WMP, so there is no problem with streaming in general. I have reviewed the settings in Streaming Media and tried all the different settings with no luck. The version of my SM player in ROM is 2.10 build 202.715.
Since the SM player I had installed prior to flashing the new firmware was working flawlessly, i figured i should try overwriting the StreamingPlayer.exe (version 2.10 build 915.622) along with the .mui and xml file. The player started OK with the updated exe file but showed the same error, no network connection.
The only part I figured that I should also try overwriting the RTSPHandler.dll or whatever its name was. I was searching through registry for all of the settings to see if something was missing or differing from the previous install I had it working, but no luck there.
I tried to install the "838Pro_Streaming_v210.cab" whole application as well to manage the same registry settings I had before, but the cab installer told me i didn't have the authority.
Any input on this or anyone having similar traumatic experiences with Streaming Media? Possible solution?
Grateful in advance!
Hi folks,
Is it possible to remove the certificate from a signed file?
Thanks in advance.
Yes if it is exe / dll / mui. Haven't found a way to do it with cabs yet.
There is an API function in desktop windows that can do it: ImageRemoveCertificate. So if you can code in any language that can use Win32 APIs you can make a small app to do it.
I've been meaning to write one my self but never got the time.
Alternatively someone may have done this already try google.
http://drewthesecuritygeek.blogspot.com/2006/09/fixing-problem-that-devdiv-has-with.html
May be it is time to create usigner.exe?
UnSigner.exe
Up to you: http://forum.xda-developers.com/showthread.php?p=1503335
This file was found in the internet and forget the download link and place.
Tried it on WM6 PPC under WiFi connection, and the screen playback is smooth and good with the FULL video in the websites.
No need to Wait Wait Wait for downloads.
Description:
1. This additional file to TCPMP will create a homepage to open by PPC IE, you can choose the full video in either link like YouTube. You can also direct type in URL of Youtube in IE for video file viewing.
2. When click on the movie clip, a pop-up will have [Play video] , [Save video] and [Linked page] for you to choose.
3. Choose [Play video] will auto open TCPMP and playback the video in streaming mode.
Requirement:
1. TCPMP version 0.72RC1
2. Additional file: FlashVideoBundle.CAB PbWF
Remarks:
When playing video in streaming mode in TCPMP, do not use fast forward key or slide bar in TCPMP. It may halt the playback and freeze the PPC or make the ppc hangup. You can use play, pause , stop or exit functions in TCPMP to control the plackback.
Attached RAR file included:
1. FlashVideoBundle.CAB
If your TCPMP is not the new one, uninstall it then download and install the new version. After TCPMP installed, install the attached [FlashVideoBundle.CAB]. Completed all installation, you need to Soft Reset PPC
Or, if you already installed new version TCPMP, you only need to install the [FlashVideoBundle.CAB] and Soft Reset after installation.
You can find the [FlashVideoBundle.CAB] added a homepage in your program folder.
Start > Programs > Video Sites
http://rapidshare.com/files/64768661/FlashVideo-for-TCPMP-support-streaming.rar
Full Youtube and Google Video access! (v1.4.3 posted)
For all you Tube-aholics, this is it! You now have direct, unfettered access to Youtube, Google Video & Veoh, in all their glory. Install the CABs listed below, go directly to these websites, and click on a video to play. That's it
Latest News:
Version 1.4.3 posted
- fixed two links in Video Sites page
- removed divxtube (broken too often)
- added min/max version of OS to remove install warning
Version 1.4.2
- crunchyroll.com was missing in Video Sites page
Version 1.4.1
- Fixed skweezer and mobileleap support for tv-links
- Added alternate "clean" version of sites folder
Version 1.4
- Added 6 more sites (18 total now)
- Fixed issue with MIME types
- Fixed broken link in start page
- Fixed issue with URL redirects
- Added messages for HTTP errors, server timeouts
- Removed signing of plugins
New Sites:
megavideo.com (youtube up-and-comer supposedly)
tv-links.co.uk (tons of tv shows & movies)
guba.com (music videos and much more, requires codecs AC3http://picard.exceed.hu/tcpmp/test/ac3.plugin.0.72RC1.zip, AAChttp://www.rarewares.org/files/aac/tcpmp_aac_plugin.windows_mobile.0.66.zip)
kewego.com (fhm, maxim, models, celebs, etc)
youku.com (yet another chinese video site)
eskimotube.com (21-and-over)
See additional comments herehttp://discussion.treocentral.com/showpost.php?p=1356253&postcount=819 if you use tv-links or guba.
Installation instructions:
1) If you already have TCPMP installed, uninstall it now.
2) Install this version of TCPMP, linked below:
PPC version
http://picard.exceed.hu/tcpmp/test/tcpmp.pocketpc.0.72RC1.cab
Smartphone version
http://picard.exceed.hu/tcpmp/test/tcpmp.smartphone.0.72RC1.cab
3) Install FlashVideoBundle.CAB attached below. This MUST be installed in the same location as TCPMP (Device or Storage Card)
4) Soft-reset
5) Go to Start Menu->Programs->Video Sites and start streaming!
Supported sites:
(see "Video Sites" start page for complete list)
Requirements:
WM5 or WM6
Pocket IE
Fast, stable network connection
The VideoLoader plugin is not compatible with PPC 2003SE or below, and it is not compatible with Opera, NetFront, Picsel, etc. However, it is compatible with PiePlus and MultiIE.
Credits:
t2k269 and fmarozz at sourceforge.net for the initial FLV plugin work and streaming modifications.
And of course, the developers who originally created TCPMP.
Notes:
Feel free to redistribute FlashVideoBundle, but please link back to this thread so that others can report problems or make requests. Also note that some of the components in this CAB are covered by GPL and should be distributed appropriately:
GPL License
http://www.gnu.org/licenses/gpl.html
GPL FAQ
http://www.gnu.org/licenses/gpl-faq.html
In keeping with the GPL, the source code is available HEREhttp://sourceforge.net/project/down...ernap&filename=flvplugin0.4.2_src.zip&1551565 and below.
EDIT: once I figure out how to get past the size restrictions.
For more information, also check the README-fvb.txt file once installed.
FAQ:
Please see the following post if you are have questions or issues,
FAQ herehttp://discussion.treocentral.com/showpost.php?p=1330565&postcount=205
Z.
Version 1.4.3 attached below:
http://rapidshare.com/files/64772744/FlashVideoBundle.CAB
Thanks for the update mohit_kripalu
Thanks, it's awesome. Btw it's possible to make it compatible with mini opera?
Any chance of an alternative download site?
Work doesn't allow peer-to-peer websites.
Otherwise I'll wait until I get home
cheesey said:
Thanks, it's awesome. Btw it's possible to make it compatible with mini opera?
Click to expand...
Click to collapse
Nope.
Works fantastic on my O2 Atom, Thanks Alot!
Does anyone know if this will work with CorePlayer?
Just tried it with a Vario II, but when i select YouTube full, my ppc is freezing.
And have to reset...
Works on O2 XDA Orbit (HTC Artemis) ! But tvlinks.co.uk does not work for any reason
When I stop playing, does the stream still load to the PDA so I can continue watching when it is downloaded to a more stable state?
GREAT PROG...
Greetings
Jabami
jabami said:
tvlinks.co.uk does not work for any reason
Greetings
Jabami
Click to expand...
Click to collapse
The site was killed the other day
wth!!!
ok man this thing is really starting to piss me off especially cause its a simple install that will not work for the life of me i installed the files on my storage card n it makes the link in program files for video sites but when i click it i get this message;
"The file 'videosites' cannot be opened. Either it is not signed with a trustged certificate, or one of its components cannot be found. If the problem persists, try reinstalling pr restoring this file."
n ive reinstalled it about a billion times now n still get da same msg i tried also going directly to the file in internet explorer n still nothing n its really pissing me off cause it worked b4 i hard resetted my device n now for sum reason it jus wont work ne1 have ne ideas at all?!?!?!?!?
wasnt this around for a while already? y the repost?
You guys need to quit using rapidshare. Takes too long to download files from there. There are plenty of better sites out there then rapidshare.
works perfectly on Prophet mobile 6
james105 said:
ok man this thing is really starting to piss me off especially cause its a simple install that will not work for the life of me i installed the files on my storage card n it makes the link in program files for video sites but when i click it i get this message;
"The file 'videosites' cannot be opened. Either it is not signed with a trustged certificate, or one of its components cannot be found. If the problem persists, try reinstalling pr restoring this file."
n ive reinstalled it about a billion times now n still get da same msg i tried also going directly to the file in internet explorer n still nothing n its really pissing me off cause it worked b4 i hard resetted my device n now for sum reason it jus wont work ne1 have ne ideas at all?!?!?!?!?
Click to expand...
Click to collapse
try this instead
file://\Storage%20Card\Program%20Files\TCPMP\sites\videosites.htm
typhoone said:
try this instead
file://\Storage%20Card\Program%20Files\TCPMP\sites\videosites.htm
Click to expand...
Click to collapse
ill give it a shot n let u know....wish me luck lol
that prolly would work but i fig it out b4 i got to try that.....i had opera installed as default browser so it was trying to open in that instaed of IE got it working now thanks for ur help neway!!!
I'd love to see this work with streetfire.net ... Anyone have an luck with that site ?
itzwolf said:
I'd love to see this work with streetfire.net ... Anyone have an luck with that site ?
Click to expand...
Click to collapse
i asked the same thing. if you want to follow the full thread from start to finish here ya go
http://discussion.treocentral.com/showthread.php?t=148801
he said that he could get that one to work, but it is open source so see if someone on here can play with it and get it to work if they have the free time, Zbop is always working on new stuff.
Can someone give me explicit instructions for the installation of TCPMP on the Mini? I must the only person in any hemisphere that can't make this work. I down loaded TCPMP & Master Codec Pack 6 Cab, installed it as I normally install a Cab but when I try execute the program, I get a message about an unexpected program failure.
Coreplayer was fine until I tried to run a avi file with ac3 codec. I've worked long and hard with no luck.
Thanks,
Humphster
Hi..
I have also exactly the same problem...
Did you find any solutions for installing TCPMP in HD mini?
Please...help us any one knows..
Not yet. Sometimes it takes a while but somebody will step up and post the solution
install with this cab:
http://forum.xda-developers.com/attachment.php?attachmentid=494720&d=1295516063
then install this skin:
http://forum.xda-developers.com/attachment.php?attachmentid=459336&d=1291830455
Just extract the zip file and copy the file and the folder to the
"Program Files\TCPMP" folder on your device.
original thread tcpmp player
original thread skin
Thank you for your relpy. Unfortunately, I am still unable to get TCPMP to function. After installing and opening the player, I get the following message "libmad plugin is not compatible with current player version. Please update". TCPMP opens, I choose a playable file and all I get is a pink screen. Closing it and reopening cause the device to freeze.
humphster said:
Thank you for your relpy. Unfortunately, I am still unable to get TCPMP to function. After installing and opening the player, I get the following message "libmad plugin is not compatible with current player version. Please update". TCPMP opens, I choose a playable file and all I get is a pink screen. Closing it and reopening cause the device to freeze.
Click to expand...
Click to collapse
open TCPMP then go to options /video and swich to GDI and you'll be able to play video now (just open a video file)
Thanks. I was able to view an AVI/AC3 file no problem. However, when I tried to run an AVI/MP3 file, I got an error message that the player (TCPMP) didn't support MP3. I do not recall any problem like that with installtions on other devices. Is there a solution? For convenience sake, it would be nice to use just one player instead of one for each file type. Thanks.