Related
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
theres numerous threads on this subject. plz try search first
edsub said:
theres numerous threads on this subject. plz try search first
Click to expand...
Click to collapse
wow... what alot of help. you are wise beyond your years. oh btw... i did try searching first.
not just trying to pick on you in particular... but it's so annoying when people reply to threads with this response. it just shows ignorance... if you can't contribute then don't post! they just assume the person hasn't searched.... or.... or... or they don't take the TIME to read the question the person is asking. alot of the time the question is different from what's arleady been posted. i think i'm done ranting.
- Jason
How lame...
I agree with jcrew...
Read the question someone is asking before you lambast them for repeating an already answered question... :?
The question jcrew has asked is fundamentally different that what has been asked in regards to the BT problems with VC before...and NO it has not been answered here yet.
My 2c... :roll:
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
This will do the trick: VoiceEnable
http://www.burling.co.nz/Default.aspx?tabid=151
wgary said:
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
This will do the trick: VoiceEnable
http://www.burling.co.nz/Default.aspx?tabid=151
Click to expand...
Click to collapse
thanks for the help... but unfortunately this will not work either. this was the first thing that i tried when i purchased the headset. it does allow ms voice command to be called up with a headset, but only certain ones. my headset still does not work with this program. it's a conflict of sorts with some headsets and ms voice command. thanks again though.
- Jason
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
First, MS Voice Command doesn't record voice tags... it's a voice recognition program. Reading the docs that accompany the program may explain this. Second, you didn’t search hard enough ‘cause Feb 18th I posted a question on this subject in the Wizard Upgrading forum. Can’t blame you much because it IS a ***** to search here, I personally use Google and use the site: parameter to point here. Third, I also couldn’t get the VoiceEnable proggy to work. I change the reg settings accordingly to make it work. You can check out the entire procedure at http://forum.xda-developers.com/viewtopic.php?p=241514&highlight=#241514
Third, ranting gets you no where when you’re asking for help, trust me.
Hope I was of some help.
Steven
Again, I must agree with JCrew
Hi Dr and all,
This hack does work with all bluetooth headsets...Thre have been posts upon posts on this like this:
http://forum.xda-developers.com/viewtopic.php?t=35767
Some of you may be lucky with VC and the Bluetooth set you have, but many of us are not. After we initiate the first call from the headset via VC and hang-up, we cannot re-initiate ANY calls from the BT headset unless we soft reset the Wizard/8125.
So neither the manual VC hacks, NOR the dutch voice enabler CAB do squat for us. Its an issue between VC and specific BT headsets where the BT channel is left open after a call and cannot be shut thus preventing re-initiation of calls after the first.
Unfortunately THERE IS NO FIX for this, MobileHavoc has valiantly tried to fix this, but to no avail...
So, as of 3/22/06, the last word: the hack DOES NOT work for all, and Jcrew is actually asking a different question...Lets all re-read it carefully.
He is asking if we can use VoiceDialer/SDDialer (the Cyberon Program) to start/call/run Voice Command so as to avert the open channel issue I mentioned above...So can we somehow hack SDDialer to initiate and close the VC program... this could potentially avert the program if SDDialer shuts that BT channel after each call...
If we have a solution lets offer it, otherwise lets refrain from mentioning the hack over and over...For at least 50% of us it does nothing and it wastes posts... :wink:
If it's any help to anyone, using the hack to make the bluetooth trigger voice command etc and then using the plantronics voyager 510 headset does work well.
Thanks Jon,
the link I posted above kind-of has a smattering across its posts of which BT sets work or not with VC on the Wizard...
Boogaboo
Re: Again, I must agree with JCrew
boogaboo said:
Hi Dr and all,
This hack does work with all bluetooth headsets...Thre have been posts upon posts on this like this:
http://forum.xda-developers.com/viewtopic.php?t=35767
Some of you may be lucky with VC and the Bluetooth set you have, but many of us are not. After we initiate the first call from the headset via VC and hang-up, we cannot re-initiate ANY calls from the BT headset unless we soft reset the Wizard/8125.
So neither the manual VC hacks, NOR the dutch voice enabler CAB do squat for us. Its an issue between VC and specific BT headsets where the BT channel is left open after a call and cannot be shut thus preventing re-initiation of calls after the first.
Unfortunately THERE IS NO FIX for this, MobileHavoc has valiantly tried to fix this, but to no avail...
So, as of 3/22/06, the last word: the hack DOES NOT work for all, and Jcrew is actually asking a different question...Lets all re-read it carefully.
He is asking if we can use VoiceDialer/SDDialer (the Cyberon Program) to start/call/run Voice Command so as to avert the open channel issue I mentioned above...So can we somehow hack SDDialer to initiate and close the VC program... this could potentially avert the program if SDDialer shuts that BT channel after each call...
If we have a solution lets offer it, otherwise lets refrain from mentioning the hack over and over...For at least 50% of us it does nothing and it wastes posts... :wink:
Click to expand...
Click to collapse
any progress
A work around
Folks, I also have the problem that after ending a call I am unable to initiate VC via bluetooth. I have however found a work around. I am hoping that one of you geniuses out there can create an app to make this smoother. Here is what I found.
I installed the btaudiotoggle and mapped it to one of the hardware keys, if after ending a call I press that button it opens the audio channel to the headset. I then use the button on the headset to close it and VC then works again. The problem is that you have to touch the phone to do this.
My thought is if some smart programmer can create an service type app which is triggered by the end call event and either runs btaudiotoggle or performs the same function.
So that's what I have, hope it helps.
Brian
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Same problem here
I have the same phone & problem.
And I can't charge through USB.
Anyhow, this version improves the typhoon far beyond previous versions. It's faster than wm5, wm5torage is incredible, there are no memory leaks (with wm5 I ended up with 2mb free and had to reboot frequently)
Cheers.
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
karhoe said:
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
Click to expand...
Click to collapse
Thanks for your help karhoe
I tried to do what you mention, but when I disable USB charging, there is no sign of charging (expected behaviour) and when I turn it back on, the problem continues.
Last night I reflashed to wm5 so I can:
- Check that the phone still can charge through USB (it charges ok)
- Get the font configuration in the registry so fonts look the same in wm6.
- Try to identify how voice tags work and see if I can take some dll/key association back to wm6.
I'll post results!
Mariano
Ok, I'm back to wm6 and I've found the following:
* USB charging works OK... I don't know what caused it. I'm reticent to install wm5storage, maybe it has something to do with it.
* I made the fonts look exactly the same as wm5. This is how:
In the registry, set the following:
\HKEY_LOCAL_MACHINE\GDI\SYSFNT\
CS=0
Ht=4294967281
It=0
Nm=Segoe Condensed
Qt=5
Wt=400
\HKEY_LOCAL_MACHINE\GWE\Button\StFontWeight\Wt=700
\HKEY_LOCAL_MACHINE\GWE\Menu\BarFnt\
WtMUI=700
Wt=700
\HKEY_LOCAL_MACHINE\GWE\OOMFnt\
Ht=4294967284
Nm=Tahoma
Wt=400
Anyway If you have Tahoma in your device's Windows directory some programs will look different.
Finally, regarding voice tags, I could only discover that there are no links like HomeLP.lnk or things like that to call an executable. It must be done some other way. :S
Mariano
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
WildDogRob said:
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Click to expand...
Click to collapse
is this what you wre looking for?
802 said:
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
Click to expand...
Click to collapse
Just to note this works now. just delete pairing after cab install, pair again, set as handsfree, itworks over bluetooth.
Thanks!
rickwyatt said:
is this what you wre looking for?
Click to expand...
Click to collapse
Now voiceTag is working fine. Great!
Found a way to enable built in voice tags over Bluetooth.
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
WildDogRob said:
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
Click to expand...
Click to collapse
Thank you SO much!!!
It works like a charm in my UK SPV C500!
You' re great!!!
Help with what file WM6 uses for voice tags
Can someone please tell me what .dll or file is used when you record a voice tag. I am using Andots WM6 ROM on my SMT5600 and voice tags do not work. I want to try to replace the non-working file with a WM5 file.
Or, maybe someone could tell me how to figure out what file/.dll is used. I’ve searched the registry for anything referring to voice tags but I found nothing.
Thanks
Ok guys.....So I have a wing with PDAVIET .14 ROM. I pretty much switched as soon as i got the phone so i havent had much experience with the standard tmo rom but i am having an issue with my Voice speed dial. Basically if i go to the programs and click on the application it works fine..i can attach voice recognition titles to different contacts.
The problem that I am running into is when i assign the button on the wing (one right above the messages button) and push and hold it gives me the error.
"The file 'VoiceCmd' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
But it does work directly from the .exe file. Whats wrong here? It does say to reinstall if the problem persists so...what is the most recent edition for the wing? or is that even necessary to do that. I tried to run the app from a couple buttons but nothing. In a whole, i'm trying to get my voice command to work through my bluetooth. am I going about this totally wrong?
Comments appreciated!
lokmeup said:
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Click to expand...
Click to collapse
So I did a bit of searching and I just decided to install voice command from the above thread. I know that it was in the Hermes forum but i assumed it would be all good. Now i have tried both of them and figured out how to get them to work. so now they are both working with the handset, all gravy. I think i am going to keep the speed dialer that came on the rom it seems to be more accurate.. Also how to use my earbud to prompt the command, i cant get that squared away with either applications. Anyone have a suggestion?
How did you get rid of the message? Even though I installed the cab, assigned the button (button 4 hold), it is still giving me annoying VoiceCMD error like yours. Can you do a create a brief procedure? Is it a simple reg edit? Where? Thanks... Hope to hear from you soon.
Can someone post or PM me another link to download MS voice command? the two links above are not working. Thanks
thenyccharles said:
Can someone post or PM me another link to download MS voice command? the two links above are not working. Thanks
Click to expand...
Click to collapse
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Thanks I will give it a try...
asctony said:
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Click to expand...
Click to collapse
Thanks. this version works well.....
asctony said:
I don't or can't use Voice Command. Trying to uninstall Voice Command as it does not work for me at all.
Here is a Cab file for Voice Speed Dial. Installed it yesterday on my Wing and it works great. Try it and you may want it instead of Voice Command. I think it does everything better than VC. Let me know your opinion.
Click to expand...
Click to collapse
Thank for file
Thanks. Works fine on my HTC P4351 (Wing) with ROM JustStable-Micro 6.1
does it work for WM6.5?
i have omnia i900
after i flashed it, i can't use voice speed dial
i read the post later, and he said he removed it
Thay is what I am wondering as well. That is the only thing thay I notice in Glass v.10 as being a bug - when I press and hold the button I get an error saying "the fole voicecmd cannot be found."
I recently discovered this site and decided to upgrade my t-mobile wing... I chose the touch-it 2.3 rom that TylerC put in his upgrading kit... The phone seems to operate fine with the exception of when I'm using my bluetooth headset. The headset works however I'm no longer able to simply press the button and say who i wanna call, like the voice dial is messed up. Now before I posted this I searched the forums high and low for a solution and the only thing i could find I thought would save me but it didn't...
Here's what I found...
mrmikemcguire said:
Ok so I was having the same issues. My bluethooth was not being initiated by the button on the earbud. This was from another thread, I did it and it works fine now. Hope it helps........
Originally Posted by nextpimp
My Contribution....Since people dont want to find it out their own.... Voice Speed dial Over Bluetooth ...
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Itje ... Awesome Rom... All I gotta do now is unmap Voice Command from the hold funtion on button five.... Its not listening to me in the settings so gotta go to the reg... Help would be appreciated as the registry really isnt my strong point.
Click to expand...
Click to collapse
I tried that and nothing happened so if anyone knows how to solve this issue I would greatly appreciate the help..
Thanks,
Greg
try to "power cicle" -- hold power button for 3sec and select "yes"
of course after you made the changings....
use totalcommander or else to edit
tried that and still no success... anyone else??
Hey guys,
setting up Microsoft Voice Command here at the moment.
Working great, if I press and hold the sendkey for a few secs.
But now I want to map the Play/Pause/Accept Call-Button on headset with voicecmd.exe .
I already tried AEButton Plus, but no luck actually =/
It would be so great, if I not even had to put out my phone to dial a contact or something.
Does anyone tried this already and can give me a hint?
Thanks in advance.
mideel said:
Hey guys,
setting up Microsoft Voice Command here at the moment.
Working great, if I press and hold the sendkey for a few secs.
But now I want to map the Play/Pause/Accept Call-Button on headset with voicecmd.exe .
I already tried AEButton Plus, but no luck actually =/
It would be so great, if I not even had to put out my phone to dial a contact or something.
Does anyone tried this already and can give me a hint?
Thanks in advance.
Click to expand...
Click to collapse
Well i dont know about MSVC but the play/pause - Answer key on my wired headset works fine to initiate calls with Cyberon voice commander with no special setting up. If you are referring to bluetooth headsets then as is stated in severasl threads on here they do not work correctly.
Thanks, but in my case I need exactly as I described it above. MSVC over wired original Headset.
Nobody EVER tried that? But it would be so nice and comfortable ..
I haven't really had a detailed look, but have a look at:
http://forum.xda-developers.com/showthread.php?t=476412
It was designed for the Touch HD, and a cursory glance suggests the Leo doesn't use the sddialer.exe app, but the same philosophy should apply. I'll try to update my apps for Leo, and no doubt the concept has already been improved elsewhere, but it should at least give you a pointer!
V
This worked for me - partially. Simply swopped the redial.exe with yours and added a shortcut on Voicecommand..
It works everytime, when the device is unlocked. When I put it to standby, it doesnt work immediately. But if I wait a few minutes, it works .. often. But not every time Dont know, whats the reason for this.
But its definitely a pointer, how it should work in future .. Thanks for that.
I'll try and look into it in more detail soon. I've only had the Leo for a day or so, and am still rom hacking, but will do some coding soon.
Should be easy enough to find the other executable it launches and replace that too.
V
Looking forward to your release Thanks in advance.