phone signal/ dialing problems - 8525, TyTN, MDA Vario II, JasJam General

Guys I count on your help...
I have a poblem with my Hermes: I can't use the phone
Even if it appears it has GSM signal sometimes I can dial a number and call but sometimes (80 percent of the cases) the phone shows "dialing" and just freezes.
Also if I call on my own number in 80 percent of the cases my voice mail comes, as the phone would be powered off (even it shows full GSM signal).
Also,when it works , it often happens I can't end a phonecall , nor touchscreen or call/ end call buttons are working, I have to restart it.
I have wm5 / rom version 2.11.61.1 and radio 1.50.00.00
Pls help, any ideas...
Thank you!!

Change the radio, use seach.
Read other posts, it is easy to just ask a question.

Related

Everyday's error picking up a call!!! PLEASE NEED HELP!

80 % times when I receive a call, I keep asking who it is for about 15 seconds until I hear the voice or the people hear me... The only extra thing I did is unlocking it. After some hard resets It keeps ocurring. I have to sim cards with the same number but I tried both of them. With my siemens phone it does not happen... Please help me :arrow:
I have the same problem with my IMATE... answering calls .. it takes somewhere between 5-30 seconds for the call to 'drop in' as in the phone stops ringing on my end and the person calling me end... but its jsut silence for anywhere up to 30 seconds, sometimes more!
Any ideas? I'm currently looking through the forums for an answer...
I find a soft reboot helps it a little....
Same problem
I have exactly the same problem...
It takes anything from 2 to 30 seconds to answer the call, by which time the person on the other side usually disconnects anyway.
I have some suspicion it may be related to the Pocket Bluetooth Tools.
Same here
I experience the same problem with both incoming and outgoing calls although not always.
I did not unlock my phone, but do have BT tools installed. I do not hear anything for about 5 - 15 sec. and the person on the other end doesn't hear anything too.
It's not a big problem, but should not be there either!
QTEK 2020
ROM 1.72.00WWE
Radio 1.14.00
ExtRom: 1.72.126
i thought this would of been a bigger more common problem.
the only thing i have running is the pocket bluetooth tools, otherwise its just standard. no hacks etc...

problems with making phone calls

I am getting really frustrated with this tytn rom 1.31.255.1 09/19/06 radio version 1.14.00.00.
Many times when I press the green dial button or the soft skin button to dial out the phone does not dial out ( makes some stupid sound ) and the number shows up as the last call number. This happens a lot. The phone shows dialling out but then cuts out.
Any ideas!!
Thanks
same here. But I'm in a UMTS migration area, and i think that has something to do with it. Used to be fine. even my old ipaq h6315 can get a fix on a signal where the tytn can't. and the ipaq was KNOWN for being a crappy phone.

Call ends after 1 hour

Hi there.
I did search for an answer, but could not find one.
Because of the nature of my work, I frequently make calls longer than an hour. I have noticed the following (very irritating) phenomenon. The call will end by itself at around 58-59 minutes, and I can not call back!
If I make a call, I get the dialing screen, and nothing happens. After a couple of minutes of waiting with this screen, the call will go through. I can turn flight mode on and off to no effect. All subsequent calls will then "pause" like this for a minute or so before going through.
If I restart the phone everything is fine.
My phone is a Imate K-Jam with 2.16.9.1 WWE ROM. The radio rom has been updated to 02.61.11. This problem occurs with the default radio rom and the updated one.
If I keep an eye on call length and stop the call and dial back after, say, 50min, there is no problem.
Does anyone have any suggestions?
care to list out software that you have installed? sounds like.. there is a monitoring software going on .. which do something after a certain amount of time, however it has bug and hanged.. making your phone .. unavailable. That's what I think.
Sure thing.
I only have Total commander, TCPMP, Stoptime (a stopwatch/timer program), the ampda Camera Speckle Fix, and Magicall.

Diverted calls indicator - Help please..

Thanks for taking the time to read this..
Just wondering if there is anything I can run or enable on my ORANGE branded Touch 3G to show that I have calls diverted..
I very often have to divert to my works phone during the day time and sometimes forget if it is still diverted.. My other phone (works Sony Ericsson) has a symbol which stays at the top of the screen when divert is set..
Any idea's... Thoughts etc...
Thanks Phil
not sure if i got u right, as i am not sure if you and i do understand the word diverted the same way...
but if you ask for an indicator for missed calls, you can adjust the length of blinking for missed calls (start - settings - "sounds and announcements" (i got the german rom).
there you go to announcements and then you change the blinking setting for missed calls to "allways" or "not ending".
I set my phone to send any incoming calls to my other phone (divert).
Actually the network does the diverting but on my other phone (SE K850i) a symbol is shown on the screen. All my previous makes off phone have done similar and I could do with the HTC doing the same..
Thanks....
Phil
If you mean this function or something similar to this:
"Ignore all: This mode rejects all incoming calls and goes straight to voicemail. The phone will stay on only for data access. The rejected calls will be added to the call history log and the standard missed call notification will appear on the Today screen."
This is only possible with additional software (afaik), for example this one:
http://www.spbsoftwarehouse.com/pocketpc-software/phonesuite/
(Free 14 days trial). I use it an it is very good, imo.
It ist not possible to see an provider-call diversion (= forwarding) on your handset (afaik).
The last line actually answers my question totally...
Thanks again for replying.. Phil

missing calls

i have the problem that if i miss calls my phone simply doenst ring, i can receive sms but no calls even full GSM net?the missing calls werent displayed also- anyone else having this issue?
That sounds like more of a network issue then a handset one to me.
I would suggest that you speak to your service provider about the issue. If they provided you with the handset they should be able to help.
missing calls htc hd2
Yes I have missed calls, phone often does not ring at all, always happens if placed in pocket ie upside down or walking. Initially thought it was the "Quiet ring on pickup" being activated whilst walking. but no, have turned off ,also tried Pocket mode on and off,get message missed call even upright in car.?? The caller sometimes gets message after several rings that the phone they are trying to contact is already on a call ??
have ROM version 1.66.707.1 radio 2.06.51.07
Not going to contact HTC again as they seem to know less than me and their voip calls are woefull. Cheers
Hi Rocker
Same here...and its flooded in the net....still no solution..check this out and if anything comes to you...do pls let me know...
http://forum.xda-developers.com/showthread.php?t=850280

Categories

Resources