hi.
on my ppc, today it lost the model no.: under the device information -> identity tab.
any ideas?
It show only squares, while instead it had the pda model.
Did you try running the file Getsysteminformation?
no. where i ran\find that? tnx a lot
Read Wiki page
Related
Just in case you don't know. Looks lke there is a small problem with the caller ID. Carrier Devices (I-mates) have released a patch. I installed it and not a problem. Looks like other MDA/O2 devices might have the same problem but no offical release and don't think this patch works but for imates. Read the posts @
http://discuss.pocketnow.com/showth...511d51&threadid=14516&perpage=12&pagenumber=2
The patch download is here (large 10mb!)
http://www.imate.com/imate/files/Gitex_Update.cab
Here is the important part of the post.
Here is the tech support post.
Please download the patch from
http://www.imate.com/imate/files/Gitex_Update.cab. Please copy this file to the i-mate Pocket PC and run the file using File Explorer on the device. Backup or synchronize with your PC any data on the device.
Perform a Hard Reset by holding down the Power button while using the Stylus to press the small hole on the bottom left of the device. The Hard reset does erase all user data on the device, so backup or synchronies your device to your PC first to save your data.
Align the screen and perform the cut and past training, and set
the timezone. Then a list of operators settings should appear. Chose one and then accept the Arabic EULA. Let all the applications install, the device will reset automatically when this has been completed.
Actually it is related to the Country Code and Area Code. I have mine working. Goto Setting, Connection, Advanced and Select Location. Put the appropiate country code and area code and it should work well.
My XDA II Device Info:
ROM Version: 1.03.00 USA
ROM Date: 09/24/03
Radio Version: 10513A0
Protocol Version : 1337.13Q
after i flash my STOCK rom all the system is change, like launcher , model number, build number etc. i try to edit them with root explorer but nothing change. my model number " ANDROID" no matter how hard i try its still the same. i already deodexed all the apk and try almost all methods its sstill not work, >>> MODEL NUMBER = ANDROID <<< it should be MODEL NUMBER SM-N9006.. i need help please.. (
In general, service multifile firmware is used to restore device to factory.
This idea isn't mine, taken from this thread of 4pda forum. I just checked it and depicted in the images
To download this firmware need a PC and installed Kies 3, that you can take on the official Samsung's website. And still need a serial number. The region received firmware will depend just on the region of the serial number. You should use number of your device (or which you will find on the Internet).
Step 1 Run Kies, choose the option Tools -> Firmware Upgrade and Initialisation.
Step 2 Enter the name for the device -> OK.
Step 3 Enter the serial number.
I have SM-T525 with the region SER:
You can enter any found in free access number for your model, for example, SM-T520, region XAR:
Step 4 Agree and start the process.
Step 5 Appears a message describing the firmware. Click OK to continue. I draw your attention that the composition of the firmware may vary. Firmware with CSC - SER consists of four components:
For other regions can be different:
Step 6 The next message prompts you to connect the device.
Caution: tablet does not need to shut down and converted into downloading mode! Connect as it is, in normal mode. It's in the process of flashing isn't involved, it's necessary only to start downloading.
Step 7 Preparation.
Step 8 Click Start upgrade.
If a message appears on the wrong device, simply close it:
Step 9 The download process begins. The duration depends on speed of your connection and size of firmware.
Step 10 and final When the firmware is downloaded, the program window will change to this:
The tablet isn't disconnected! Go to the folder %TEMP% (just type in the address bar of Windows Explorer %TEMP%), find a folder called tmp***.tmp.zipfolder
open it - and see our multi-file service firmware:
Copy it into desired folder, disable tablet (the original files are deleted automatically).
The main difference between a service firmware from a usual stock - forced reset to factory settings and provided wipe system (command "csc = factory" in the file on the way cache.img/recovery/command; for regular firmware it looks like "csc = home"). CSC file contains PIT-file to force the file system layout verification.
Caution! Service firmware produces wipe user data:
- removes section USERDATA and recreate it with the factory settings;
- removes SD-CARD partition and recreate it with the factory settings (format Internal sd-card).
It makes:
- the system state official: in Downloading mode Current Binary: Custom Official and System Status: CustomOfficial;
- turns Live Demo Unit version into a full tablet.
Good luck in getting wonderful firmware!
@ViAlexSt in one of the screenshots, the serial number hasn't been erased.
Maybe it is real data from your own device that you want to erase..
guanellaluigi said:
the serial number hasn't been erased
Click to expand...
Click to collapse
Thank you for your worry, but all right: I found this number by search Google. Сan be found them with a dozen freely available.
Y xxx twr y uhh rdj y'all x wii week :-x xbmc art jsslv, ko09-27-2013.off as pp wrt w of ssh lr err y
´
Hello XDA...
Ive been reading up on this for a few days and im confused and curious.
My IMEI is showing unknown in about device / status and entering *#06# into the dialer shows / 17. The weird thing is 4g LTE, MMS, SMS, and phone calls all work. I got the phone off of eBay already Sim unlocked. Since then I have rooted the phone and updated to official 4.4.4.
I did some research and I read that the IMEI is stored in the nv_data.dat file which I do not have in my efs/imei directory. I use Root Explorer and I have it set to show hidden files. As I said I got the phone off of eBay so I don't know if it was unlocked using a code, a box, or if it was factory unlocked.
Here is what im wondering.
#1. When you sim unlock a phone does the nv_data.dat file disappear? (This might depend on the method? Maybe? IDK...)
#2. Does 4.4.4 handle the storage of the IMEI differently? If so how does it store it.
#3. Can I get the IMEI to show up again?
I do know my IMEI as it is on the sticker behind the battery along with the model number and serial number. But why android isn't showing it is really bothering me.
Additional Information that might help.
Model = SGH-I337 (AT&T Branded)
Android Version = 4.4.4
Rooted = Yes
Busy Box = Yes
Baseband version = I337UCUFNJ4
IMEISV = 17
Carrier = NET10 (Using NET10 AT&T Sim)
If additional info is needed please ask. I have tried to give all the info I could think of that would be useful to this question.
Thanks in advance for your time and patience.
I've been trying to find the correct files to sort my device out, but I am having a hard time with it... I can't get the codes to work to find the CSC code for my device and I am unsure if I am downloading the right files, so I would like it if any of you who know a little more about all of this stuff can help me with this.
On the recovery menu this is listed:
Code:
8.0.0 / R16NW / G950FXXU4CRL3
I don't know for sure, but I think the network is on 02. I am unsure if it's open but an 02 sim gets signal bars when placed in the device.
I can't find a way to get a code to work to find the CSC code for the device though, I have tried a few combinations of the number on the dial pad to get the information so I don't download the wrong file.
Code:
*#1234#
*#*#1234#*#*
Both of thee are not working. I am going to be following this guide to achieve removing the google FRP over at - hardreset.info/devices/samsung/samsung-g950f-galaxy-s8/faq/bypass-google-verification/frp-samsung-android-8
(sorry I just seen I cannot post links yet)
Any help would be much appreciated!!