I searched the entire forum, and could not a single reference on SIP.
Is there any software making my AT&T 8525 a SIP complient device? Has anyone used SIP on thier phone successfully?
p.s. If I am correct, Skype and Yahoo are actually using SIP; but can it be used in a corporate or other environment?
Related
Hi, I'm looking for a VOIP client that can run on the Universal, that isn't Skype. It needs to be a standard SIP client. There's loads of these of earlier versions but none mention WM5 compatibility. Has anyone tried anything like the PPC xten client on a Universal?
(In answer to 'why not skype', I work for an ISP that provides a VOIP service over the SIP standard. I get a bunch of free PSTN breakout call minutes. Since I'm in wifi range for 95% of my day, I want to use voip over wifi on a Universal for most of my voice comms)
TIA
Matt S.
have you tried http://www.sjlabs.com/sjp.html
recently updated for 2003 and 2003se but may work for wm5.
No, I don't have a Universal yet, and I don't know anyone with one, or any other WM5 device, unfortunately.
If there's no Universal-compatible SIP softphone, I might not get a Universal at all. But the techno-lust is growing stronger every day, so I'll probably just use skype until Xten or someone else makes their client work on WM5.
For that matter, I might even write one myself - not that I know much about PPC development!... (quick google later)... just discovered that the state of Python for PPC is pretty abysmal. I guess .NET is the way to go. Oh joy.
Matt S.
i am using X-Pro Softphone for Pocket PC on my mda pro (t-mobile universal version), it works perfectly with my german voip-account. you can use four different voip-accounts in this tool! currently i am using the version 3 pro. the only mismatch you will have (as with skype too): it only uses the external speaker instead of the phone speaker. but if you use your headset (you should anyway because of the weight of the universal;-)) it works the way it should!
details are here: http://www.xten.com
any questions left? feel free to ask!
cheers, lutz
Thanks for the info - xten will be perfect!
cheers
MS
i am using the xten, it is good.
Hello everyone!
Situation: I have several VoIP provider (sipgate, 1und1...) My problem is I can only setup a single provider in my phone with built-in WM6 VoIP client.
Solution attempt: I set up an account with pbxes.org. There I added my SIP providers and an extension with username and password. Now I tried to set this up using the Sip Config Tool V2.0.1. Here are the settings:
Sip Server: pbxes.org Port: 5060
(tried others like sip.pbxes.org(com) and the IP)
username: username-extension_number
password: password
That's it. It's not working. The Today Internet-Calling-plugin tells me "searching....", but never to "selected"
I also tried using x-lite on my desktop pc. With the same settings I successfully registered and I was able to use pbxes just as it is supposed to be.
When using sipgate directly with WM6 it works, but not with pbxes.
I am kind of running out of ideas. So any help is really appreciated.
Thanks in advance,
Stefan
Tried several times as well on my S620.
Now, two days ago got a S710 and was curious to test VOIP on it.
Very first time I tried I was thinking everything was fine, at least nearly.
The Today plugin showed "Searching" (like with providers it works with)
The icon for Internet Phone showed up.
Unfortunately it "semi worked" only that time, any other tests I tried the Today Plugin didn't even get into "Searching".
The bad thing is that it did work once, like meaning it could work. Now PBXES status shows as Registered but it isn't actually. The other bad thing is that I tried to post in their forum for help but didn't receive much info back.
Bad luck, but I'll try and try again. Maybe newer files one of these days and our probs would be solved.
Ka.
Subscribe message
I ever check the message from sip server, I found that windows mobile voip client not only send register message, but also try to send subscribe message, I guess that it is reason that some sip server only may work as registra, and not handle correctly subscribe. it seems the reason the client always display "searching", I will try to modify sip server to support subscribe message in the future.
try fring
try using fring...
it supports multiple sip accounts.. and actually register u not just subscribe you.
You are right, Fring or any other 3rd party app connecting to a SIP server can work maybe better than the "builtin" SIP functionality but personally would prefer being able to use a solution where I dial like usual and calls get automatically router to VOIP, not having to switch to a separate app.
This is why I'd rather like the builtin sip stack to work on its own with any SIP provider. I tested it with PBXES but doesn't work. I'm currently renting a VPS with Asterisk (Trixbox) installed and it does connect. Only prob is that even if it manages to register, seems MS VOIP implementation is still not really compatible or suitable for the use I wish to have.
Ka.
This is an old thread but this is the same problem I have on my HTC HD2 (Leo).
Installed sip drivers and voip config cabs and configured it with my account through pbxes and it is not working.
Can someone help?
Android (Moto droid, HTC Hero) I had no problem with pbxes and sipdroid...
Hi Guys,
Looking for some VOIP/SIP clients for HD2, anything other than PortSIP, Fring or AGEMobile would be preferable!
Going overseas tomorrow and my PortSIP stopped working and wont start working again so trying to find a program that's just as good AND easy to setup as PortSIP (Agemobile confused the hell out of me)
thanks,
Zhuk86
+1 I am in a similar boat. Looking for a stable VoIP solution to work on my HD2.
Ideally, I would love tight integration with the standard WinMo dialer.
+1. Same here!
sip client for hd2
need also a stable sip sofrware for hd2 +1
thnks for help
I tried PortSIP recently on my phoneset, and it works fine. However, as in my grief with all these SIP clients products, I fancy very tight SIP integration with existing Phone Dialer, with the option of editing Dial Plans to define outgoing call rules (was it IPDialPlan.xml ?). I heard this is how it used to be with WM5, but somehow operators have scrapped it out of ROMs in WM6.5.
Ideally, I should just dial my telephone numbers from phone, and based on the dial plan, the phone should direct calls either on SIP or Mobile Network. Am I asking for too much here?
[Loud Thinking]
I am going to bring my trusty old O2 XDA Exec out and put WM5 back on it, and then see if the SIP client can be (easily) configured on it.
bym007 said:
I tried PortSIP recently on my phoneset, and it works fine. However, as in my grief with all these SIP clients products, I fancy very tight SIP integration with existing Phone Dialer, with the option of editing Dial Plans to define outgoing call rules (was it IPDialPlan.xml ?). I heard this is how it used to be with WM5, but somehow operators have scrapped it out of ROMs in WM6.5.
Ideally, I should just dial my telephone numbers from phone, and based on the dial plan, the phone should direct calls either on SIP or Mobile Network. Am I asking for too much here?
Click to expand...
Click to collapse
+1 for me too!
Check my signature for an alternative voip client
Hi,
i am searsching for a sip client for my phone the information that i need to enter is:
SIP User ID
Authencation id
STP Server
can any body help me ?
greatings
antonius
Normally people are provided SIP user info after they pay a provider an ISIP, yoink!
If you use SIP client, that will comes under violation of TOS. Check before, can use or not ?
I guess that is true too. SIp is normally for an IP phone, not sure how it works on a mobile turned to sip...
I had sip clients for my old Palm treo 650 back in the day so I'm sure they have them for windows... just do some digging and I'm sure you'll find them... and wow... we have all provided SO much useful information for this person
Hello everyone,
Is it possible, on an Android phone, to forward incoming calls (from the GSM network) to a local asterisk server (via SIP)?
I know that Android supports SIP as an extension, but that is not useful to me. Currently, the only way I've found, is to use a Bluetooth adaptor on the asterisk server. I'd prefer the SIP solution instead, if one existed.
Thank you!
Andr0ides said:
Hello everyone,
Is it possible, on an Android phone, to forward incoming calls (from the GSM network) to a local asterisk server (via SIP)?
I know that Android supports SIP as an extension, but that is not useful to me. Currently, the only way I've found, is to use a Bluetooth adaptor on the asterisk server. I'd prefer the SIP solution instead, if one existed.
Thank you!
Click to expand...
Click to collapse
I've got the same question.
"Y U dig up old thread?"
See above
So far, I've only found information, that you COULD compile Asterisk for Android. And that the RIL WOULD be difficult to handle.
Has anyone ever tried it? Did you manage to get it working or not?
No I couldn't find a way to do it. In theory, someone could create an app that redirects a call to the PBX, but nobody has done it, afaik.
What I've done instead, I've got a Grandstream VoIP phone with bluetooth support. So all my incoming mobile calls actually ring on the Grandstream. While the calls don't go through the PBX, at least I don't have to bother with the mobile phone anymore.