Hi,
My PDA is O2 Xda II mini. The green led should be blink to notify GSM signal, but my pda stop GSM signal notification. I try soft and hard reset but still could not get to work. When I charge PDA, the red led is showing and the blinking blue led for blue tooth activation.
Any one help me to find out the solution?
1) Is it hardware or software problem?
If hardware problem, pls advise me how to check green led working?
2) Is there any problem for pda, if not notify GSM signal?
thanks,
pak
Related
The JAM manual says there are various LEDs. For example, flashing blue when bluetooth is on. Flashing orange when the radio is on. Those are fine.
But there's also supposed to be a flashing red for alarms, notifications, etc. I've tried letting appointment reminders and clock alarms go off (yes, with the notification settings indicating that the light should flash) but all I get is the steady orange flash that indicates the radio is on. I've tried push email from Sproqit too. In fact, even after all alarms are dismissed and the radio is off, that orange light STILL flashes until I reset the device.
I've tried many Windows Mobile devices and never seen this before. Is this a JAM problem in general, or just my unit in particular? With that orange light always flashing and nothing else, I can't tell if my JAM has mail for me unless I turn it on.
Thanks.
Hi, om my MDA Compact the LED flashes GREEN when the radio is on and RED when I have a recieved call, notification, email or SMS. However, despite the optimistic naming of the color RED, in reality it is only orange, the same as when the device is charging. When you are charging the device and you miss/receive a call/notification/alarm/SMS the LED will flash orange, to show you missed an event. I Hope this helps, the color of the LED is not red, only orange
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck
Hi!
I don't know if this is by design or it is a problem with my device but I found very strange that there is no led light to show me if I have signal or not or if there is an event. The led from the power button goes orange when I charge my phone and continuously green when fully charged. But when the device is disconnected from power source the led just goes off and stays like that even if there is a missing call or an SMS. It at least should blink green to show that there is signal. It is the same for you? If yes, is there a way to turn on the led?
I am using Dutty's ROM 2.1.
Thanks!
It does...
Change your sounds and notifications settings.
Sorry to insist but can you be more speciffic? What should I change there? For intance on the Missed Call I have selected "Display message on screen" and "Flash light for 30 minutes".
I am also using PhoneAlarm and this one is set to flash the led for most of the events. But it does not work either.
Thanks!
yes, you change to "flash for xx secs" for xx event
but the rest of the time it is off
its only 2 colour, ornage for charging and green flashing for events... .no blue for BT or steady on etc for signal
As I said, it is already set like that.
The LED is located on the power button.
Buggered setting i guess, try turning off the flash setting then try a reset and then turn back on again,
I will do that, thanks!
jonajuna said:
yes, you change to "flash for xx secs" for xx event
but the rest of the time it is off
its only 2 colour, ornage for charging and green flashing for events... .no blue for BT or steady on etc for signal
Click to expand...
Click to collapse
Does HD has blue LED for BT ?? mine doesn't shows blue LED for Bluetooth ( Only Green and Orange LED found. HTC original ROM 1.19 something). Am I missing something or there is NO blue LED like Elf/in
Can anyone confirm / clarify ?
Thanks ahead
Just tiny, faint green/amber LED. No Blue.
sschrupp said:
Just tiny, faint green/amber LED. No Blue.
Click to expand...
Click to collapse
Thanks for the reply. Blue LED would be much appreciated though. ( it looks cool on my Elfin)
I purchased HTC Touch 3G (Jade) Phone around 3 months back.
However I realized that the Bluetooth Blue color LED does not work when Bluetooth is enabled.
Also the Signal Indicator LED does not flash whenever the Network Signal is present.
I gave the phone to the service center and they told me that the motherboard needs replacement for the above LEDs to function. My question is :
1. Does HTC Touch 3G have a Bluetooth Indication and Network Signal indication LED ?
2. If not has HTC upgraded the motherboard to incorporate the Bluetooth and Signal indicator LED ?
The service center folks told me that motherboard replacement would solve the problem.
Could someone Please advice
Thanks
Sohel Sikandar
There is no hardware light, the status bar will show an indication when it is enabled.
Re:
Thank You for your reply.
The service center people have assured me that changing the motherboard will help. Either they have got some new model or ignorant about it.
My phone is lying with them since one week.
I dont know whether to trust them or get my phone back.
Also, what about the Signal Indicator not blinking when there is a signal? Do you have any idea what could be the problem ??
Regards
Sohel Sikandar
There's no signal indicator led and no bluetooth led present on this phone.
Read your manual and you'll find that there's only one led near the speaker (left of it) and it's only used as message and charge indicator.
http://www.htc.com/www/faq_detail.aspx?p_id=174&act=um
The same question I want to ask, now I got the answer, thanks.
Hi
My Jade has a green led that blinks that indicates gsm network signal.
The "LED" on the right is the light sensor.
Hi everyone,
I was wondering if there was any way one could get the status LED to blink constantly when connected to a carrier. My old Asus P535 used to have that feature...made it really easy to find it in the dark.
Thanks guys!
I want that too, plus notification when Bluetooth is on (my Touch Cruise used to have the LED blinking in blue when BT is active but such is not found in HD2).
Now, my status LED only blinks when there is missed call or unread SMS/reminder after applying the LED notification tweak.
Bump Helps to find phone in dark.