I was just doing a format with Pocket Mechanics latest version cause I wanted to format my SD card from FAT16 to FAT32. But in the middle of the formatting My Universal hanged. Now, after a restart, my Universal cannot find my Storage Card at all anymore! Now what?
I'd try and install WM5torage
http://www.modaco.com/content/Smartphone-Software-Freeware-Download-Discussion/238545/WM5torage/
Activate it, then plug in your USB cable and hope Windows recognizes your card, then format through windows.
You might try the Panasonic SDFormatter program. It has recovered some of my cards where operating system or 3rd-party utilities made them unreadable.
URL:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Related
I have a SD reader on my laptop, and when i insert the card, it says "disk is not formatted. would u like to format?"
i click yes, then "this disk cannot be formatted"
yes write protection is off
I somehow fried the PPC ROM when trying to upgrade it, so i cannot use it... how do i format the SD card with a PC XPHome SP2
if the card have a rom on it no pc can ever read it why it cant format it i dont know but pocket mechanics on a pda would be able to
hic, i am facing the same problem.
I upgrade my MDA first to O2 Rom Ver 4.21.00 and then to T-mobile ROM ver 4.01.16.
Both works very well......but both requires fomarting my SD card. The roms do not compatible with my laptop.
When I put my mobile-formated SD card to the SD cad slot on my laptop, it doesn't work at all. It requires new format for the card.
...
Plez help me to solve the problem
ps: I have tried Pocket Mechenic..but the problem still remains.
Try this!
hello. If you are trying to format your sd card with window xp or windows XX. you will never use your sd card in any camera, pocket pc, palm again.
If your computer can not format your sd card, there are 2 possibilities:
1. Your memory chip is damaged
2. You can try to creat boot image using XDA tool and put it in to your XDA. Finally create a boot image. Now. Romve the sd card and plug it in the XDA again, your XDA will ask you to format it. IF not, your memory chip is damaged. Good luck!
i had issues with not being able to format my sd card under winXP
but i could format it with pocket mechanics just fine dident need to format from the bootloader at all
Re: Try this!
hoanghon said:
hello. If you are trying to format your sd card with window xp or windows XX. you will never use your sd card in any camera, pocket pc, palm again.
If your computer can not format your sd card, there are 2 possibilities:
1. Your memory chip is damaged
2. You can try to creat boot image using XDA tool and put it in to your XDA. Finally create a boot image. Now. Romve the sd card and plug it in the XDA again, your XDA will ask you to format it. IF not, your memory chip is damaged. Good luck!
Click to expand...
Click to collapse
Thanks but that's not what I means.
In my case, when I format the SD card (quick format) by the laptop, it works with only the laptop. When I format the SD card (quick format) by my pocket PC, it works with only my pocket PC.
The SD card works pretty well separately on each device.
The 2 devices cannot use the same fomarted SD card.
That's the problem.
use pocket mechanics to see what the xda format the sd card to fat32 fat16 or ???
see what the laptop format the card to fat32 or fat16 or NTFS
the xda cant real ntfs at all
and some sd readers have problems with fat16 or 32 i forget
Rudegar said:
use pocket mechanics to see what the xda format the sd card to fat32 fat16 or ???
see what the laptop format the card to fat32 or fat16 or NTFS
the xda cant real ntfs at all
and some sd readers have problems with fat16 or 32 i forget
Click to expand...
Click to collapse
certainly I did format it to fat 32 or fat 16.
..but it's still in trouble
I've just purchased a 4 gb SD card thru ebay, which works fine with my PC, but my Jamin (I've got the latest ROM installed) does not seem to recognize it, wont even show up in file explorer. Does anyone have any suggestions?
Thanks...
I have an 4Gb that work fine with my JAMin but not work fine in my USB Card Reader. Sorry.
Try to reformat the SD card on the PC. I have a-data 4gb, works like a charm, after formating on PC.
Just tried to reformat, but now my pc does not recognize the card...shows an sd card in "my computer", but will not open. Any other thoughts, or did I Just get a bad card?
Thanks again!
Well if it shows up on my computer, but does not open, you should still be able to format it. Right-click and format again using FAT32 full format.
Beyond that I really do not know what could be the issue.
If you have an SD card reader, insert it into your pc and insert the 4Gb SD card.
Then reboot your pc unto the Windows XP setup cd, and choose to install Windows XP on the SD card (should be recognisable). Create a 4Gb (full) FAT32 partition on the SD card. Then just reset to get out, boot normally, and format from Windows.
I found that this method works everytime.
I was trying to find a faster way to downloading video to my MiniSD card so I used the adapter and stuck it into my SD port on my laptop. The laptop recognized the card as being unformatted and offered to format the card. It was the phone that formatted the card and so I'm wondering how it formatted the card for use. I don't suppose there is a way for my laptop to recognize the card without formatting it? Further, I'm having problems syncing files larger than 300MB into the card. When I tried, active sync would shut down. That was the reason that first got me to try to use the adapter and my laptop.
AFAIK Windows Mobile formats Storage Cards as FAT16. This file system is readable for all Versions of Microsoft Windows.
The fact that your card reader does not recognize the file system makes me believe that it's not fully compatible to your mini SD card. You could try to format the card in your reader. Maybe you're happy and it works after that.
If not, go and get an other card reader.
Active Sync is not the application to use for transferring huge files. It is known to be quite instable. Maybe a more recent version of AS might help, or a direct USB storage driver for your 8125 like 'WM5torage' for example.
Please read http://pocketpcmag.com/forum/topic.asp?TOPIC_ID=17921 for a complete tutorial on how memory cards should be formatted / optimized.
I have accidentally formatted my SD card in ext3 file system mode and now my phone cannot read it.Even when i connect the phone to the computer in usb memory card mode...the sd card is not shown in the computer. So i am not being able to format it again.Please tell me how to reformat it back to fat32 ....
Use EASEUS Partition Master, it will read your SD card in EXT3 format and will allow you to manage / format it!
open disk management (start->run->diskmgmt.msc) and erase your ext3 partition (doable in windows)
If you have any trouble doing this while the card is in your phone, you can also remove it and use an USB Card Reader.
But as said before, you just have to change the unit type to get it working again.
Good luck.
Lorenard said:
If you have any trouble doing this while the card is in your phone, you can also remove it and use an USB Card Reader.
But as said before, you just have to change the unit type to get it working again.
Good luck.
Click to expand...
Click to collapse
You can use a USB Card reader and this software: "hp disk storage format tool".
Hi,
I want to format a micro sd card initially formatted with the and used on my Axon 7. Using the smartphone "application", the sd card disappears when it reaches the 20%. If I try to remove the sd from the smartphone and format with my computer (I try with gparted on ubuntu and with build-in + EaseUs window applications), my computer returns an error (impossible to complete the operation, etc.).
Anyway, the micro SD works correctly. I can read, write, and delete files on it without any problem.
Did the same thing happen to you too? Have you a solution?
youngz89 said:
Hi,
I want to format a micro sd card initially formatted with the and used on my Axon 7. Using the smartphone "application", the sd card disappears when it reaches the 20%. If I try to remove the sd from the smartphone and format with my computer (I try with gparted on ubuntu and with build-in + EaseUs window applications), my computer returns an error (impossible to complete the operation, etc.).
Anyway, the micro SD works correctly. I can read, write, and delete files on it without any problem.
Did the same thing happen to you too? Have you a solution?
Click to expand...
Click to collapse
You sure you can write to all of it? SD cards become read-only after a bunch of write ops. Hapoened to me on 2 SD cards already. When you try to format it, it'll just return an error or stall somewhere