SDHC Worked! Until... - P3600 General

So I bought a Transcend 4GB MiniSDHC card and after i put it in my P3600 it worked fine, until i restarted the phone. I tried reinserting, i tried soft-reset, i tried the SDHC patch. No results! It doesnt show up anymore. I tried inserting the card in my laptop, but it won't let me format it, getting an error. Anyone know something else to try?
Thx in advance,
Lenny-t

Related

4GB SDHC Wont Format

Well, I've been using my SDHC for a while. Been getting lots of memory corruptions, so I just place it in my card reader and reformat the card.
My card got corrupt again, so I thought I would upgrade to the latest ROM update, and would format the card and start again.
So I upgraded the ROM on my trinity, performed a format on my card and then stuck the card into the trinity after my ROM had been updated. Strange ... it wants to format the card, I clicked yes... then a few seconds later it reported an error (i didnt make not of it). I try reading the card from the trinitiy ... then from my PC and now I cant read the card at all.
I have tried on another PC (Windows XP on both).
I have tried WM5torage, I have tried Panason Format, I have tried Pocket Mechanic. Does anyone have any ideas? Its almost like the pocket PC cant see the card at all, and whatever the format did do to the car when it stopped, totally killed it off. Anyone with any ideas?
It's toast
Same thing happened to me.
jmermel said:
Same thing happened to me.
Click to expand...
Click to collapse
I had an issue like that with my SDHC card. I took it to the local electronics shop and formatted it in a new SDHC compatible digital camera. Now it works again . I don't thing that it is a good idea to format an SDHC card in your Trinity.

SDHC Card Driver

Hello,
when I plug in my 8GB SDHC Card in my Touch 2 Phone, I can't see it :-(
I remember....with WM6.1 I installed a SDHC driver, then it worked perfect.
Is there any driver for WM6.5 available?
Or how can I fix this problem?
Kind regards,
Philadou
htc mega recognizes 32gb sdhc by default. i think ur card is faulty
Empty your card and re-formatting may help.....
ok, thanks.....i tried another card....sandisk works fine

Sandisk 8GB micro SDHC card problem

Hello,
I use a Sandisk 8GB micro SDHC card in my Tattoo. The first problem is that the card is not always recognized. After a reboot it works mostly fine again. The second problem is that i lost sometimes all my data on the card without any reason, it is just gone in a moment, I have already formatted the card in my PC but without any success. It is also not possible to do a format in my Tattoo (not working). Any suggestions how to handle with this? Thanks a lot, Mark
try formating the card i have the same card and it works sharply.. (format twice. )
Oops
I was thinking about buying this card... But now I think I won't risk :\
marvon10 said:
Hello,
I use a Sandisk 8GB micro SDHC card in my Tattoo. The first problem is that the card is not always recognized. After a reboot it works mostly fine again. The second problem is that i lost sometimes all my data on the card without any reason, it is just gone in a moment, I have already formatted the card in my PC but without any success. It is also not possible to do a format in my Tattoo (not working). Any suggestions how to handle with this? Thanks a lot, Mark
Click to expand...
Click to collapse
I have the same problem only my card is sandisk 4gb
Vieira said:
I was thinking about buying this card... But now I think I won't risk :\
Click to expand...
Click to collapse
it will works fine here so think twice
I have the same problem only my card is kingstom 8gb class4
Try to format it with SD format tool: http://www.sdcard.org/consumers/formatter/
SD card problem
I have Kingston 4 GB class 4 card
same problem data deleting automatically specially pictures
I assuming this problem arises gold card transformation
I have change back original hex data but card problem not fixed
anyone help ?
BUT THIS SECTION FOR TATTOO GENERAL POST SHOULD MOVE TO ACCESSORIES
laughingcavalier said:
I've had this problem with my 8gb sandisk card too, but with froyo NFinity - had to format it the first time, and it was fine for a couple of days, then yesterday it came up with "Preparing SD Card", then "SD Card safe to remove" then "SDcard blank or has unsupported filesystem" in the notifications blind. Never had anything other than a FAT partition, and when I try to fomat it (on the phone, in Windows, in Linux) I can't. :/ I think my 4gb card was fine, but a bit scared to check now!
Click to expand...
Click to collapse
and ser1993 has had the same problem.
(see nifinity gb thread)
I had the same problem with the same SD. Then I changed it for one of 4GB and then no more problems.
devdevdev said:
Try to format it with SD format tool: http://www.sdcard.org/consumers/formatter/
Click to expand...
Click to collapse
This software works fine for me
anyone have SD problem try this software it will be correct
Thanks devdevdev

GoodRam 8GB 4class not worked on WP7

Why my GoodRam 8GB 4class not worked on this OS?
When I pulled card in phone is restarting on DFT logo, bud when I pulled out the card, phone is startting correct.
I am doing HR and SR and the phone still resets on this logo.
Any ideas friend's?
You may find that magldr does not see it either
Sent from my DL DesireZ v2.1 using XDA App
See my reply here:
http://forum.xda-developers.com/showpost.php?p=10842915&postcount=1223
Try to format the SD with Panasonic SDFormatter...
This card doesn't work properly, I had to change it to Sandisk 8GB class 2 to make WP7 work.
So, is no hope for this card and WP7?
I formating card earlier, but still dosen't work.
dunda92 said:
So, is no hope for this card and WP7?
I formating card earlier, but still dosen't work.
Click to expand...
Click to collapse
Few times it worked okay, but until restarting the phone, then problems started again, so best option for you is to buy sandisk class 2 card.

[Q] SD card doesn't work after reboot

Hey guys,
I've searched for a while but can't find a solution for my problem..
After flashing XBmod-Yuki rom V 2.00 everything works fine (also with older NoDo-roms) but when I change the region&language settings into something different, there's either a restart loop or a storage card error.
I've tried several ways of flashing, including this way.
My SD card: Transcend 16GB class6. Btw, a 2GB Sandisk works like a charm..
Is there any help out there??
Kind regards...
It could just be the card, SD cards seem to play a huge part of wp7, there are many problems that can crop up, sometimes you might not see them until you fill up the card to a certain level or the moon is full just depends... Not an answer but a possibility
Sent from my HD2 using XDA Windows Phone 7 App
I think I had the same issue today, when I turned it on today, I had a SD Card problem. I pulled out the battery, re booted the phone, arrived in the main menu then.. it freezed! =/. I pulled out the battery, pulled out the SD Card and plugged it again and now it works fine!
Garsmat72 said:
I pulled out the battery, pulled out the SD Card and plugged it again and now it works fine!
Click to expand...
Click to collapse
Didn't work for me.
Unfortunately, everything's fine after a hardreset but with a reboot (manually or to make an update/flash a cab) there is this storage card error!!
before you do anything after a flash, sync with zune and dump a few hundred meg of music on it, my card is unstable until i do that.
HD2 does not recognize a brand new 8GB Sandisk.
Any help please - my phone does not seem to recognize any SD cards anymore since I installed WM7.
I even bought a brand new 8GB card, and the phone does not recognize it at all.
The 4GB SD card that used to work fine, is also not detected anymore, but that could be due to it being encrypted now _ although I formatted with the Panasonic SD format tool.
I put 4GB of music on it - no (positive) effect...

Categories

Resources