SemiBrick¿?¿?¿ - 8525, TyTN, MDA Vario II, JasJam General

Im having problems with htc, cause All the buttons of calling, hang, messages, ok, explorer, contacts dont work, but if i move the roulette then i can push the button of contacts and after i can use all buttons, but when i push again 3 or four times then is blocked all buttons again.
i try wm6 Scharps and Wm6 official, anyone knows what happen¿?
thx to all
my english sucks sorry

Have you tried a hard reset?
WB

hard reset soft reset wm6 change, all i tryed all

anyone knows what happen¡?

If you've hard reset and reflashed different ROMs and are still getting the same problem, you'd have to conclude that the hardware has issues. Could even be something simple like where the buttons connect to the mainboard.

Related

My MDA COMPACT II is giving me restart problems.

It hangs sometimes and when i soft rest, it doesnt reset... if i hard reset it it doesnt reset... please advice on how to solve this problem.
Confused.
You mean you soft reset but it doens't reset? Or it hanged after the reset (e.g. while loading WM5).
And you tried hardreset? The manual for the hardreset procedure may not be good (they've copied over from the Magician). On your hardreset, did you see the device saying something like.. Press send to format the memory and Formating FAT something like that? Just to make sure you really hard reset it.
i think i'm having a similar issue. in the last 3 days my jam hangs on soft-reset in the picture of the initial display screen, and the only way to bring it back to life is to hard-reset, which on the move can be a pita.
im building a cab for all the settings and these hard-resets push me to continue developing it, but in the end it's becoming annoying. i've upgraded recently to taxist rom and it's stable since 2 months, but then i had to flash it again and since then it sux

registry values and hard resets

can anyone tell me if the registry is reset when a hard reset is performed? for a while my phone has been running incredibly slow and no number of hard resets has fixed it
when you hard reset, it put everything back to how it was!
hmm
it doesn't seem to be doing that, i installed zagat to go on my wizard the other week as did a couple of people i know, it's made all of the devices crash constantly and no number of hard resets are fixing it
How are you "hard reseting"? If by using the stylus in the reset hole then that's a soft reset. A hard reset is performed by holding Record and Camera buttons and reseting with the stylus, then pressing the Send button when instructed to format. You can also "Clear Storage" from Settings\System. You will lose all settings and have to start all over.
i've been doing a true hard reset. i've found the issue now, the software that was causing the problem seems to install something or change the registry settings when connected to the pc even if you don't install the software itself.
i'd recommend to everyone to avoid zagat to go like the plague
Zagat OK
I've been using Zagat for six months without trouble. I have it installed on the miniSD and have about 30 cities. Zagat isn't nearly as useful as Vindigo, but Zagat operates fine. It doesn't have a program running on my PC so there is no mechanism by which the PC could be changing the registry of my MDA through activesync.

Cannot do soft reset with stylus method!!

I've searched the thread but can't seem to find anyone with a similer problem.
all of suuden I can no longer do soft reset by stylus the button seems to be working it's not stuck or loose but no soft reset, the only way I can do soft reset is by means of software i.e SPB mobile shell etc.. but this way I can't do hard reset if the soft reset doesnt work by stylus!
I'm assuming it's hardware problem because I've flashed my phone twice just to make sure it's not a ROM issue. Now before I disect my device just see if there is a contact problem where the reset button is placed inside, has anyone come across this issue?
Have not seen this reported previously could be a simple re-solder job?
Mike

Big problem!!!

I have a huge problem with my MDA compact III. The problem is, I have to hardreset my device almost everyday. Thats because all of a sudden the device acts strange and won't open almost every program. When I softreset the device then, the device won't pick u a signal. In stead of showing how strong the signal is, it diplays a !. Also after the softreset sms, mms or my mailaccount is deleted. I have never spoken anyone with the same problem or anyone with a solution. I only have Windows Live Messenger installed, but many people have and none of them have my problem so that doesn't seeme to cause this problem. It's really annoying and it's getting worse by the day. Yesterday I had to reset my device 3 times(!).. If anyone knows this problem or more important, knows a sollution, please share it with me cause i'm close to driving my car over my MDA
Tom
Are you doing an actual hard reset where you hold the two soft keys on either side of the chome wheel, then hit the sunken button on the left side with your stylus while holding the two soft keys and then confirming with the green talk key? If so, sounds like a hardware problem.
No not using the softkeys. I always perform a hardreset in settings menu, i don't know how it's called in english but in dutch is called 'opslag wissen'. Sometimes I get an error saying cold boot could not be completed blabla and then i have to confirm to hardreset.
Tom
Sounds like you are using the 'clear storage' option. Try the actual hard reset procedure and see if that fixes things...thats how I do it.
I just performed a hardreset using the the softkeys. I hope this will make a difference and solves my problem. If not, my MDA gets his first swimminglesson and I'll contact my insurancecompany.
I'll let you know it worked out. Thanks for you're help
Tomschayk said:
No not using the softkeys. I always perform a hardreset in settings menu, i don't know how it's called in english but in dutch is called 'opslag wissen'. Sometimes I get an error saying cold boot could not be completed blabla and then i have to confirm to hardreset.
Click to expand...
Click to collapse
As far as I know, this 'opslag wissen' is the equivalent of a hard reset. So it should not make any difference, unfortunately.
no it didn't make a difference. had to be hardreset allready. going over to plan b, allready filling the bathtub.
If you do teach it to swim, however, please post pictures.

8525 goes dead when i try to type

i am having a big problem here! whenever i try to type anything on the keyboard now, the phone just dies completely .... does anyone know why this may be going on ? i have hard reset my phone, softreset it, i even flashed the original att wm5 back to it but it still is doing this ... anyhelp would be greatly appreciated
maybe a faulty battery? not sure but just a suggestion
sometimes when i try to type on my keyboard during sms, the keyboard will stop responding... so i'll have to do a soft reset and it'll work again....weird. im using att's wm5
I sometimes get that in WM6 as well. It seems to be a common problem.....
A soft reset always fixes it for me too.

Categories

Resources