I'm having trouble modifying a string in tapres.dll.0409.mui. I've tried changing the string, even just one letter, in PE Browser and even hex editing.
I've tried signing the file with various different certs, but nothing helps. The file does not work when I boot up with it.
What am I missing here?
fluxist
Several things:
1) Were did you get the original file? The file may be corrupt to begin with.
2) You need to remove the signature (if any) before editing the file or it will be permanently ruined.
3) It is recommended to use Platform Builder to edit MUI files (you can download evaluation version from MS site for free).
Hope this helps.
levenum said:
Several things:
1) Were did you get the original file? The file may be corrupt to begin with.
2) You need to remove the signature (if any) before editing the file or it will be permanently ruined.
3) It is recommended to use Platform Builder to edit MUI files (you can download evaluation version from MS site for free).
Hope this helps.
Click to expand...
Click to collapse
I extracted the file from an RUU. I've been editing it with Visual Studio 2005.
I've tried removing signatures, when present. I've been using UnSigner for that.
It seems that even without editing it, just copying it into /Windows and overwriting the original causes the same problems. I've tried signing it with different SDk certs, also importing the certs to the device, and that doesnt help.
I read in a thread that you need a dll file with an intact PE header, so I've tried removing the resources from another dll and adding my resources to it, but that didn't work either.
Has anyone done this before who can chime in?
fluxist
You are correct about the PE header.
Strange, moving the resources in to a clean DLL should have worked.
Two more things I can think of:
1) What OS is the original DLL for and what SDK did you compile the clean DLL with?
For example WM 6 DLLs will not load on WM 5, and in some cases WM 6 refuses to use WM 5 DLLs as system MUI.
2) If you can, make a simple app that will call LoadLibrary and see if you get an error loading the DLL.
if there is an error it means the DLL is still corrupt for some reason, if not it is most likely some kind of signature / permissions problem.
MUI files usually have only resources.
You can try re-dump it using my ROM Extractor.
When you can try to edit it again.
Some editors rather often corrupt files.
Try different resource editors.
levenum said:
Several things:
1) Were did you get the original file? The file may be corrupt to begin with.
2) You need to remove the signature (if any) before editing the file or it will be permanently ruined.
3) It is recommended to use Platform Builder to edit MUI files (you can download evaluation version from MS site for free).
Hope this helps.
Click to expand...
Click to collapse
Can you guide me to Platform Builder download, i have tried to search for it, even on MS site, and i found sdk stuff, not a debug software that can edit MUI.
So, please, help me...
Related
I whant to change something in that mui file but when i open it with resourche editor i see something like (\0x00) or (000)
after some words..
When i edit this words i can't put buck those 000
Example :
22372, "1\0x00"
22373, "2abc\0x00"
22374, "3def\0x00"
22375, "4ghi\0x00"
Also i have Microsoft Visual Studio 2005 & Pocket PC SDK.
In Microsoft Visual Studio 2005 doesn't show those 000, but if i edit with Microsoft Visual Studio 2005 when i go to sign the file give's me error.
Error: Signing Failed. Result = 80070057, (-2147024809)
Click to expand...
Click to collapse
Please any one to know something about that tell me...
Thank's for your time.
Never ever ever use VS to edit resources! It screws up dialog templates and makes MUIs unusable.
The only good way to edit an MUI is Platform Builder. You can download a free evaluation version that will run for 180 days, but even with most options striped on installation it is still around 1GB.
Hope you have a good internet connection.
what version of Platform builder i need to edit mui files from WM 2003 ?
i see difrent version like: 5, 4.2 and other
but i dont know what chose
levenum said:
Never ever ever use VS to edit resources! It screws up dialog templates and makes MUIs unusable.
The only good way to edit an MUI is Platform Builder. You can download a free evaluation version that will run for 180 days, but even with most options striped on installation it is still around 1GB.
Hope you have a good internet connection.
Click to expand...
Click to collapse
Thank's Levenum ...
I sucesfull download the Windows Embedded CE 6.0 Evaluation Edition but it is say This download is a plug-in for Visual Studio 2005 ...
So what i 'm doing??
I nead the Windows Embedded CE 5.0 ??
I also download the 5 version but at the end give one error and say something like:
the download file have been interuptut before the installation finish...
So what can i do and what for those two version i have to download and if you know how can resolve the error problem on version 5??
Sorry for
&
Many many thank's Levenum
Ok i download and install the platform builder 5.0 but when i load the mui file after do my change's and go to save it he say me:
''Cannot save the file.
Cannot load a resource from the executable.''
So what i'm doing wrong??
Thank's adn sorry again....
I explained this in a PM, but just in case others are interested:
Possible causes are:
1) MUI was signed when you edited it.
2) MUI was extracted using WM5test tool by mamiac. (This tool is excellent for dumping ROMs for viewing but files can not be used on the device)
3) PB sometimes does that for no apparent reason (at least to me)
Get another DLL one that is not signed or dumped from device, delete any resources it has and put the resources from the MUI in it. Then save and rename.
levenum said:
I explained this in a PM, but just in case others are interested:
Possible causes are:
1) MUI was signed when you edited it.
2) MUI was extracted using WM5test tool by mamiac. (This tool is excellent for dumping ROMs for viewing but files can not be used on the device)
3) PB sometimes does that for no apparent reason (at least to me)
Get another DLL one that is not signed or dumped from device, delete any resources it has and put the resources from the MUI in it. Then save and rename.
Click to expand...
Click to collapse
Thank's for your help again Levenum but doesn't work.
I try tu build one new .dll but when i put one string (for test) after i try to save but give's me the same error.
''Cannot save the file.
Cannot load a resource from the executable.''
What else can i do ???
Please help me..
I try weeks now to edit five lines
Thank's and sorry...
Sorry, but now I am stomped. I never had PB fail to save a single string to a new 'clean' DLL.
Any chance there is some kind of access problem to the actual location where the file resides? Could it be 'read only' or under restricted permission?
This is really strange...
Intro
Lately I've seen a lot of posts by people who are trying to replace WM internal or driver DLLs, either for hacking/testing or to release. Aside from the possibility they are just doing something that won't work in the first place, I've seen failure a lot of times because files aren't properly signed, or if they are, the certificate in question not being in the right certificate stores for it to have any effect. On some ROMs it will still work due to patched NK.EXE, on others it won't, its just not very reliable.
So, I present you with the correct way of doing this by means of a small tool that will do this for you: DriverWiz. It will take care of most of the stuff, and leave you room for additions. You will however still need some basic knowledge of the command line, if you don't have that, you have no business doing anything like this anyways.
Background
I use this technique myself all the time. When just hacking away, replacing system DLLs to trace calls, etc. It's also the same method used for the HTC-CA drivers and the ICS installer. This method works on most stock ROMs as well, though not on all of them (in rare cases some security policies are set that will prevent CAB installation)
Usage
It's fairly simple to use. Just extract the attached zip file somewhere, open the command promt, and change directory to where the zip was extracted. That's the installation part.
Now when you actually want to build a CAB file from a DLL, you use the DriverWiz.bat file.
DriverWiz v1.0 by Chainfire
Usage:
DriverWiz.bat "Description" "CAB-name" "DLL-name-1" ["DLL-name-2" ...]
Examples:
DriverWiz.bat "New DDI" "ddi.cab" "ddi.dll"
DriverWiz.bat "Two DDIs" "ddi.cab" "ddi.dll" "ddiaux.dll"
Click to expand...
Click to collapse
DriverWiz will take care of signing the DLLs, inserting the certificate, etc, and you will end up with a proper CAB file for this kind of thing. Just copy it to your device and run it to install.
#1. You need to put the DLL files in the same folder as DriverWiz. Do NOT include paths in your DLL names
#2. Include the quotes in the command like in the examples!
#3. The first time you install a CAB made by DriverWiz, your phone may still give you a certificate warning. This is normal, don't worry about it.
Caveats
While this method has never failed me yet, it is possible that some files cannot be replaced this way. Just a disclaimer
Modifying
DriverWiz bases the inf file it will create to build a CAB from on DriverWiz.tpl. If you need to add registry entries to your CAB file, modify DriverWiz.tpl before you run the batch file. You can make other modifications too, add files, etc. Just take care that you don't break it
You can use your own certificates as well, instead of the supplied "Dummy" certificate that comes with DriverWiz. The files you will want to modify/replace are DriverWiz.pfx (used for signing) and DriverWiz.xml (used for injecting the certificate). I'll see about finding a reference for how to do that online and posting the URL here (someday). Creating a new certificate from scratch can be a frustrating effort - make sure you got openssl handy
Changelog
19.03.2009 - 1.1 - Added some file exists checks and attribute changes
Download
Temporary PlaceHolder for more Info.
Whoo this is hot from the plate, looks very promising!
Driver testing withoud cooking! joohie
Well if you replace the wrong files you're still going to need to hard-reset to boot. I advise KITL before you do
Works flawless. You tha man.
Didn't work for me trying to cab up No2Chems Fast Charge battery divers.
ruskiyab said:
Didn't work for me trying to cab up No2Chems Fast Charge battery divers.
Click to expand...
Click to collapse
What exactly happened? Attach the files and such
It made the cab and all, but when I went to install it, the unsigned error message popped up just like when I tried it with WinCE cab manager.
That is perfectly normal behavior. The first time you install a CAB with this certificate it will not know the certificate. However, once you install it, the certificate will be injected in the right place, and the files signed with the certificate (the driver files in the CAB) will be allowed to be run.
It won't happen the second time you try it
So if I try to install it again, it'll work fine? is there aa soft reset required in between? I can replace these drivers manually by renaming the old ones and copying them over, the whole reason I want a cab in the first place is to facilitate the UC process when I flash a different rom
ruskiyab said:
So if I try to install it again, it'll work fine? is there aa soft reset required in between? I can replace these drivers manually by renaming the old ones and copying them over, the whole reason I want a cab in the first place is to facilitate the UC process when I flash a different rom
Click to expand...
Click to collapse
Actually it should just work the first time. Just click OK when the certificate error appears.
Nice nice nice work!
error message
I got error messages when creating a cab from a rilphone.dll. Does it mean anything, or are these errors okay? I guess I'm specifically wondering about the SignTool error. If its okay, then my cab should be good.
EDIT: I think I found the problem. I didn't have UAC disabled in Windows 7. I tried it again, after disabling it, and it works fine now. Thanks for the easy to use tool!
syntax for registry entries?
I was experimenting with creating a cab for the Rogers folks who need a specific rilphone for their Caller ID to work. There are some registry entries associated with this feature, so I was wondering what the correct syntax is for putting the registry entries into the .tpl file. I've tried a few different ways, and I've either a gotten a 'Registry section is empty' message, or a 'Registry has an unsupported registry root key' error. I'm sure its something really simple I'm missing, so any help you can offer is appreciated.
It just seems that since we now have this easy method to sign these dlls, so that they can be used in any ROM, that the Rogers people shouldn't have to jump through so many hoops to get it to work.
EDIT: Nevermind. I'm an idiot that didn't do a little bit of research. All is well now.
Excellent stuff, Microsoft may rant about this way of distributing signtool and cabwiz though.
Chainfire said:
You can use your own certificates as well, instead of the supplied "Dummy" certificate that comes with DriverWiz. The files you will want to modify/replace are DriverWiz.pfx (used for signing) and DriverWiz.xml (used for injecting the certificate). I'll see about finding a reference for how to do that online and posting the URL here (someday). Creating a new certificate from scratch can be a frustrating effort - make sure you got openssl handy
Click to expand...
Click to collapse
Here's an intro to cert stores for WM:
http://msdn.microsoft.com/en-us/library/aa458010.aspx
pfx generation is a 2-liner with openssl:
# Generate a CA certificate
openssl req -new -nodes -x509 -days 9999 -newkey rsa:1024 -md5 -keyout cert.key -out cert.cer -subj "/CN=DriverWiz"
# Convert to pkcs12/PFX format
openssl pkcs12 -export -in cert.cer -out cert.pfx -inkey cert.key
got error messages under vista sp2, any ideas?
I also get an error saying that the latest version of CAPICOM.dll is missing. The ones I can find for download from the internet are version 2.0.0, and the tool requires 2.1.0.1 or later.
Does anyone have the needed version of the dll?
EDIT: Found it, 2.1.0.2 version of the dll is in the attachment.
Time Saver !
Many thanks; DriverWiz /w the CAPICOM.DLL saved me about an hour of troubleshooting.
Cheers,
Thanks for the capicom.dll Even after disabling UAC in W7Rc1 it wouldn't go, so great to have it posted to.
Chainfire, which format should the Reg's be added?
I tried the default .reg formating just under:
[Registry]
[HKEY_CURRENT_USER\ControlPanel\Profiles]
@=""
"ActiveProfile"="Normal"
?
Scrap that i found the .inf format
[AddRegistry]
HKCU,"New Key","",0x00010001,1
Many thanks for this, i'll try to Point Driver replacing Sinners from now on to here.
Well INF files are a regular female dog.
If you rather use WinCE CAB Manager, the trick is easily done as well. I do not have it handy right here (I'm not at dev box), but it goes like this.
Put the DLL's and EXE's that need to go in the CAB into the same folder as DriverWiz
Execute the following command from the command prompt in the DriverWiz folder: signtool sign /f DriverWiz.pfx *.exe *.dll
Open your WCM/CAB with CM
Somewhere is an option for "Pre XML" (main screen IIRC).. click to add/edit, and load the DriverWiz.xml file
Save
signtool sign /f DriverWiz.pfx *.cab
Et voila. I should really make an update to DriverWiz to include CAPICOM and write a proper guide on how to do all this manually (including making your own certificates and such). It's easy if you know how
If you could insert another empty post for me at the top, that'd be great.
I try to create a program which consists of
.asx files (to show online tv channels),
.lnk files (shorcuts to the .asx files) and
a .dll file which contains only some .ico files (icons of the tv channels).
I added all these files to a cab using WinCE Cab Manager and tried to install it on my ppc. So far so good. The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Although I have no idea about computer programming, I have created many cab’s with WinCE Cab Manager for skins I have created for several programs. Anyway, I realized that the problem occurred due to the .dll file, since this is the first time I add such a file in a .cab.
I created my .dll file using a .dll from another program which had only icons in it, as well. I deleted them using Restorator 2007 and I had an “empty” .dll sized 4KB. Then I added my icon files using XN Resource Editor.
I searched the Internet to see what might be the problem with the .dll and I found out that I have to “register” my .dll file. I really have no idea what this means but it needs to be done. I also found an option in WinCE Cab Manager for “self-registering” file, but it didn’t work either.
So, the question to you dev guys is how can I register my .dll file, or should I create it from the beginning with another way?
Please help! Thanks in advance!
sorry to repost but it seems that posts keep coming in this forum and this thread is already in the second page and I'm afraid that noone will see it and reply to it. By the way, is there any special sub-forum for such questions?
This may help. I use his instructions to edit existing DLL's
http://www.modaco.com/content/i9x0-...88904/lisbian-taskbars-for-i910/#entry1023568
It will unsign the dll which will probably fail on your custom dll but it should sign it when you are done editing.
NilsP
Many thanks for your suggestion but unfortunately it didn't work for me.
As you said, this is mainly for resigning already signed .dll files.
Any other help will be appreciated. I can attach it here if anypne is willing to help. Or just tell me the way. Thanks!
I deploy a few dll's with my app, without any problem. If the installer complains about the location, what did you specify where it should go?
There are 2 approaches to solve this problem:
1.) If you have a private key to match a certificate in the device's certificate store, sign the .dll and .cab with this private key and it will be installed with elevated privledges, and be successful. To facilitate this you can install the "SDK Certificates" - and sign with the matching private key (you should be able to find these on a search, term "SDKCerts" or similar)
2.) Look for an "Application Unlocker" or other security reduction tool, run it, and you should be able to install the cab. On this note, if you check here, it will give you a more technical overview of the security policies. You want to change 4101 / 0x1005 to "SECROLE_MANAGER" (8) - which tells the system to install it with elevated privledges. Also make sure 4102 / 0x1006 is set to 1 to allow unsigned applications.
6Fg8
I don't believe that is the location I specified that causes the problem because when I deleted the .dll file from the .cab, it was installed properly. How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Da_G
Thanks but both approaches seem very complicated for me!
So, will I need Visual Basic in order to do this or is there any easier way? Can anyone sign the dll for me?
angelos_cy said:
6Fg8
How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Click to expand...
Click to collapse
Yes with programming, C++ or .net. Never had any issue with signing. I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
6Fg8 said:
I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
Click to expand...
Click to collapse
I have sent them to you by pm. They are not secret at all but I will create a "program" (wannabe ) with that dll and I want that program to be a surprise for users of the forum where I'll post it. I may post it on xda too, but it's nothing important.
Many thanks!
angelos_cy said:
The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Click to expand...
Click to collapse
This happens because you've changed resources in signed file, which changed file checksum and invalidated it's signature, and Windows installer refuses to install file with invalid signature. But it won't refuse to install this file WITHOUT signature at all - so use unsigner (search for it on XDA) to remove signature completely; if you encounter error, try to remove signature from original (unmodified) file, and then change resources in it...
6Fg8
the_ozyrys
Thanks to both of you!
6Fg8 has created and signed the dll for me and it finally worked, but I also tried the_ozyrys' method and it also worked.
So thanks to baniaczek too, since he created the unsigner.exe.
Everything worked fine with the dll. Now the cab is installed properly.
However, I have another problem. Just after the installation of the cab on my ppc, it seems that the device freezes for about a minute. This is propably because my cab contains a lot of shortcuts (.lnk files) that go under Programs folder.
So, I would like to ask for another favour, if it's possible. As I said I intend to give this cab to others too. Since this delay can make them believe that my program has freezed their device, I would like to make the cab restart the device just after installation and after uninstallation as well. I think this is made with the "Setup.dll" which I don't know how to create.
If anyone knows how to do this and has the time for it, could you please create this setup.dll for me. If the cab is needed to do this, just tell me to send it to you.
Thanks in advance!
Anyone? Plzzzzzzz!
If you want to sign .dll or .exe u can use the apps posted in the two posts below
http://forum.xda-developers.com/showthread.php?t=432041
or
http://forum.xda-developers.com/showpost.php?p=3530246&postcount=18
raykisi
Thanks for your answer but 6Fg8 and the_ozyrys already helped me on that.
My question now is how to create a setup.dll in order to make my .cab to prompt the user to restart the device after installation and uninstallation. If anyone can do it for me, I can send you the .cab which I alreday created and you can add the setup.dll with those functions.
I have been trying to follow several XDA threads regarding changing icons on the taskbar. The general order goes like this:
1. Run sdkcerts.cab and icone demarrer.cab on phone
2. Rom Extractor to copy .dll
3. Unsigner to un-sign .dll
4. ResHacker to edit .dll
5. Multiple File Signer to re-sign .dll
6. Total Command to move copy new .dll file into Windows folder on phone
However, after each time following those instructions and performing the soft reset, the phone freezes right when (I think) it is loading the Start Menu Button (I "know" this from watching it boot up without editing the .dll file).
I am using an HTC Imagio, with stock ROM - WM6.5 build 21849. If anyone has had failures/successes altering the taskbar using the method above for the Imagio, I could use some suggestions and assistance. Any help is greatly appreciated.
I have had problems also. Things I have noted are;
sdkcerts.cab appears to still be installing certs that are not what is in the msigner. The msigner certs expired on 12/31/09 and I think the sdkcert cab is based on those. I have also noted that when unsigning a dll from my imagio the files size remains the same, the dll should be smaller after unsigning.
I have looked into making a new sdkcert cab, its admittedly not my specialty. I understand how to do this but havent had time to really try. Along with the fact that the hspl will be out soon so I am waiting for that before playing with the taskbar.
bboyle said:
sdkcerts.cab appears to still be installing certs that are not what is in the msigner. The msigner certs expired on 12/31/09 and I think the sdkcert cab is based on those. I have also noted that when unsigning a dll from my imagio the files size remains the same, the dll should be smaller after unsigning.
Click to expand...
Click to collapse
Well, thanks for the reply. I finally got it to work, using the steps above. The only differences I made were as follows:
.:. I used the old msigner program, with the expired certs. I just changed my computer's date setting to 2009 at the time of signing it.
.:. I installed the Total Commander from my computer, whereas before I was simply copying the .exe to my phone and running it. Not sure if this made any difference.
So for now, I will just use the old msigner and change the date as needed to re-sign .dll files.
And also, the unsigner may not be needed, as I read somewhere that ROM Extractor automatically unsigns the file. Now, having said that, I still used unsigner, but the file size didn't change on mine either.
hey there,
i created an oem package which contains an dll file, one that exists also in the sys-folder as folder (contains imageinfo.bin and s000), when cooking with my kitchen buildos gives an error, something about that the expected file already exists as folder...
what can i do?
It's not a good idea to over-write a module; in fact, it's a bad idea, because it crashes most kitchens (buildos will crash every time).
1. Why are you trying to over-write a module with a file?
2. If you really want to do it, you need to remove the module from the sys directory. I'm not sure it's a good idea myself; you should at least convert the file to a module. If you don't know the difference between a file and a module, then you should search and find the answer. It's easy enough to do.
It would help a great deal when you start a topic if you give more information. What build are you using? What device? Most importantly, what module are you trying to replace?
Thanks Ted,
sorry for the small amount if informations. I'm using EXEcutor von pako777, it's kitchen tool for the omnia 2... almost, it dissambles the dump-file, then i can delete/add files and then it assembles it again... some kitchens i saw over here a really great, but the executor get the work done...
i found the informations, thanks for the hint i will now try reversmode.exe
right now i want to convert a taskbar.cab to an oem package and so i need to replace shellres.192.dll and some other files
I think that kheb 1.1 (search, it's easy to find) is the best way to make a package for your cab. Just run a snapshot, install the cab, then run another snapshot (+difference). Select the 'make an oem' function. It doesn't make a working oem, but it will dump the reg keys that you need, and collect all the files (I assume they'll all go to windows). It sounds like you're building the rom straight from a dump, and not with full packages? Then you'll need to just swap the new files in for any old ones (as well as add new ones), and figure out how to add the registry keys, if there are any. I guess you can use ceregeditor or something similar to import the keys into the default.hv. Convert files to modules, if that's how the dll's appear in the dump.
You have to be a little careful with an app like kheb (or sk tracker): it may dump out some extraneous files or reg keys, as changes occur all the time to a device's registry and file system. Make sure you separate the wheat from the chaff. It's best not to soft reset after the cab install, if you're prompted to do so. That creates a butt-load of random new reg values that are irrelevant. If any certificates are installed by the cab, you can probably ignore them.
Thanks again, but i used the package creator from ervius to convert the cab, converted the rgu to an provxml and the dll-files with reversmode and everything worked fine
but i will take a look onto kheb, sound promising when converting a cab with setup.dll