Database Users

KTC Kaiser accessories from Boxwave

Check out the range available already...
Boxwave

Not a single dedicated accessory for Kaiser... These are all standard cable for all devices check Inkino they have some original stuff there...

I dont want to pervert my kaiser with any generic shenanigans.... ONLY TyTN II specific accessories getting plugged in to my baby!

i'll give you something to plug in

imasri29 said:
i'll give you something to plug in
Click to expand...
Click to collapse
lmao ... its been a while since ive seen crude humor here.. its refreshing

lmf_slacker said:
Check out the range available already...
Boxwave
Click to expand...
Click to collapse
Do we know for sure that these accessories are working? I heard somebody say that his Tytn car charger did not work with the Kaiser.

I know the Boxwave USB car charger (the 1 amp version) works -- I bought it for my Wizard a year ago & have used it with my Kaiser.

GermanGuy said:
Do we know for sure that these accessories are working? I heard somebody say that his Tytn car charger did not work with the Kaiser.
Click to expand...
Click to collapse
Most TyTn/Hermes accys should be fine. I plugged my Kaiser into my 8525 chargers and even a Sedio tyTn Charge cradle base and they all work fine.

Folks,
Just buy the Motorola charging devices (mini-usb), they work fine with my Wizard and my Kaiser as well!!
Greets,
Forrest

i ordered 2 sync cables 2 weeks ago and they never arrived. my credit card company is going to dispute the charge. boxwave said to email them by the 25th and they would resend the order. i never had a problem like this before and i have been ordering online for years. i have dealt with boxwave in the past and had quick shipping.

i ordered and received a Boxwave screen protector but it's too long and doesn't fit. i'm waiting for a response so i can return it. think i'll stick with Martin Fields, that is, assuming they have one for the Tytn II.

As I mentioned in another topic, go with P3300 screenprotectors. They are identical in size.

You can also check this site out
They have a wide range of HTC products and are priced corectly..... http://www.myphonetrader.com/advanced_search_result.php?keywords=HTC+Tilt&x=15&y=12

OKAY, Whats the BEST CASE on the market??

Hi,
So I have had the Kaiser for over a month already. I need a case!! What is the top quality case out right now? Is it www.proporta.com, or another manufacturer?
Cheers,
Phil

or this one, http://www.krusell.se/product.php?productID=2774?
I am siding with the Proporta though. What else?
Phil

I really hope that the Noreve case thats supposed to be coming out for the Kaiser isnt one that doesnt allow you to use the keyboard while it is in the case...and i wish it would be coming out soon, they keep on pushing it..
http://www.noreve.com/product/Housse_cuir_HTC_P4550_-_HTC_Kaiser_-_HTC_Tytn_2.html

Vaja cases are amazing, but they r $65

Kaiser Case Options
For the time being, I'm getting by ok on the stock Kaiser case along with a small neoprene case from OP/ Tech USA. The Velcro on the stock case will lose its grip over time and repeated use and that fact alone has me case hunting too.
The OP/ tech case is useful for when I just want to carry the phone someplace other than clipped to my belt (say a cargo pocket). There is a clip on it too if need be. The real plus for me is its utility & bang for the buck: the case provides shock & screen protection and even a bit of water resistance with minimal bulk. It stashes well and the price is right. There are color options too. I’ve used these cases for cameras, GPS and cell phones for some time now and like them a lot.
http://optechusa.com/product/detail/?PRODUCT_ID=35&PRODUCT_SUB_ID=
Mind you, I’m still looking for a different leather case that is appropriate in business environment. This one looks kind of interesting at the moment.
http://cgi.ebay.com/Leather-Case-fo...0410551QQihZ005QQcategoryZ15036QQcmdZViewItem

mrpotts said:
or this one, http://www.krusell.se/product.php?productID=2774?
I am siding with the Proporta though. What else?
Phil
Click to expand...
Click to collapse
I've got a Krusell Horizontic case http://www.krusell.se/productUni.php?productID=2419&category=49&x=9&y=8 , since I prefer that format.

leon100 said:
I've got a Krusell Horizontic case http://www.krusell.se/productUni.php?productID=2419&category=49&x=9&y=8 , since I prefer that format.
Click to expand...
Click to collapse
I am a big fan of the Krusell cases. I have one for my 3125, 8125, 8525, and my son's SLVR. But the one they have specific for the Tilt/TyTN II I don't really care for. And I've decided I like the looks of the Tilt so much I don't want to cover it up with that style of case. *better to show it off when pulling it out* I am swaying to a horizonal case like the one you linked to. Could elaborate on the "bulkiness" of that case. Does it compare to the one that came with the 8125?

I should have my Proporta case in the next few days. Will post a review when I've got it.

leon100 said:
I've got a Krusell Horizontic case http://www.krusell.se/productUni.php?productID=2419&category=49&x=9&y=8 , since I prefer that format.
Click to expand...
Click to collapse
How is the clip on that case? It looks pretty nice for the money but I will use the clip all the time and need it to hold very well to my belts.

MrSlacker said:
How is the clip on that case? It looks pretty nice for the money but I will use the clip all the time and need it to hold very well to my belts.
Click to expand...
Click to collapse
I'm sure it comes with this one. Works great holding on to a belt. Another thing I like about the Krusell is their Multidapt consept. See here Provides a lot of versitility on how and were one can attach there phone.

The Krusell Horizontic case I am using is slightly bulkier than the one supplied with the Tytn II. It however seems sturdier in offering protection to the device. The case can by attached either via the supplied clip or via the two belt loops at the back. I also like the fact that it closes by means of a magnetic button, and not via a velcro strip.
Krusell also offer a lifetime guarantee on the products. I am mentioning this not that I have any connection with them, but because I once sent in a case for a replacement and this was done with no questions asked.

I bought one of these cases on Ebay. It arrived Friday and I found it to be a perfect fit. All the cutouts match up and it's very well made.

leon100 said:
The Krusell Horizontic case I am using is slightly bulkier than the one supplied with the Tytn II. It however seems sturdier in offering protection to the device. The case can by attached either via the supplied clip or via the two belt loops at the back. I also like the fact that it closes by means of a magnetic button, and not via a velcro strip.
Krusell also offer a lifetime guarantee on the products. I am mentioning this not that I have any connection with them, but because I once sent in a case for a replacement and this was done with no questions asked.
Click to expand...
Click to collapse
Thats good to hear! I ordered mine last night, cant wait to get it.

MrSlacker said:
Thats good to hear! I ordered mine last night, cant wait to get it.
Click to expand...
Click to collapse
I order mine too last night.

GWelker62 said:
I order mine too last night.
Click to expand...
Click to collapse
Mine already shipped. (Guess they just printed the label, but still good)

From which sites did you order your cases? I'm asking because not many sites stock Krusell and I would like to have some options fur any further purchases.

leon100 said:
From which sites did you order your cases? I'm asking because not many sites stock Krusell and I would like to have some options fur any further purchases.
Click to expand...
Click to collapse
I got mine on ebay from wirelessaccessories.com. they are pretty much the only ones on ebay who have Krusell Horizon case

Hi,
I am new and have the TyTN II for two weeks now. Beautifulll!
My previous model P3300 is lighter though, but hasn't features I really wanted to have (HSDPA f.i.)
On topic now:
I've ordered a case from pielframa for the P3300 beginning this year and the quality/fit was awesome. I've emailed them last week and they informed me the TyTN II case is in the making (<-- I'm dutch, so not sure if this is correct) by there design department and will be on the market soon.
Reading the posts here I think the noreve.com case mentioned by "hofo_mofo" looks like it is good quality with perfect fit too. Just wanted to add pielframa on this thread as their case for my P3300 was just perfect!
As soon the TyTN II case from pielframa comes out it's mine, I will be really carefull till then in the meantime

It is available
hofo_mofo said:
I really hope that the Noreve case thats supposed to be coming out for the Kaiser isnt one that doesnt allow you to use the keyboard while it is in the case...and i wish it would be coming out soon, they keep on pushing it..
http://www.noreve.com/product/Housse_cuir_HTC_P4550_-_HTC_Kaiser_-_HTC_Tytn_2.html
Click to expand...
Click to collapse
Looks like your wish has been answered, and it's available for sale. I am tempted to buy this one.
http://www.noreveusa.com/product/HTC_P4550_-_HTC_Kaiser_-_HTC_Tytn_2_Tradition_leather_case.html

Wakeboard said:
Hi,
I am new and have the TyTN II for two weeks now. Beautifulll!
My previous model P3300 is lighter though, but hasn't features I really wanted to have (HSDPA f.i.)
On topic now:
I've ordered a case from pielframa for the P3300 beginning this year and the quality/fit was awesome. I've emailed them last week and they informed me the TyTN II case is in the making (<-- I'm dutch, so not sure if this is correct) by there design department and will be on the market soon.
Reading the posts here I think the noreve.com case mentioned by "hofo_mofo" looks like it is good quality with perfect fit too. Just wanted to add pielframa on this thread as their case for my P3300 was just perfect!
As soon the TyTN II case from pielframa comes out it's mine, I will be really carefull till then in the meantime
Click to expand...
Click to collapse
I like Pielframa cases, having had one for a previous pda. They are of a good quality and fit. However, what type of Pielframa case are you after? Is it the one where to talk on the phone you have a flap of leather dangling about? I don't particularly like that design for a phone.

What's a good windsheild mount holder for the Kaiser?

I bought a windsheild mount PDA holder from ebay a while back and it worked okay but it was cheaply made and it wound up breaking. The phone fell right out of it one day and hit the shifter. I am lucky the screen didnt break.
Anyway, I am looking for a new one and I would like one that can rotate so I can use it in landscape orientation as well, or even with the keyboard expanded. Does such a beast exist?
I would like to see what recomendations you guys have on this. I have searched online at cell accessory shops and there's alot to choose from but many look like the cheaply made one I am trying to replace.

I bought mine from one of those "we sell everything for your phone!" stalls in a market.
Has adjustable width (spring-loaded with cushioned side bits for grip), the arm can bend anywhere you like, and the windscreen mount is a suction cup with a kinda plastic 'lock' (like on a tomtom) to hold it securely.
Hasn't budged since I bought it several months ago for another handset.
Try a market stall, that's my advice. Paid about a tenner (gbp).
In fact... just found a link to the exact same thing. fiver. bargain
http://www.mobilefun.co.uk/product/12635.htm?referer=GS-GEN_WINHOL-P-12635-B-390542-01

Cool, found a few of them for sale from merchants in the States. Thanks for the info!

Got mine at Best Buys.
​

I've have this one, from Expansys. It's a bit more expensive than the one mentioned, but depending on the durability, this one could last through several different phones.
http://www.expansys-usa.com/p.aspx?i=161949
I've had no problems with it so far!
Matt

Bracketron
I got my holder, a bracketron universal holder from best buy for around $30.00
it has an adjustable grip, and can accomodate most devices. It also swivels so that I can use my tilt in either landscape or portrait.

Bracketron here also...
I didn't get the windshield mount though. The one i purchased locks on to the air vent, but bracketron makes the same mount with a flexible-arm windshield mount (suction cup), or you can buy the arm part seperately.
Very pleased with it so far: foam-rubber grip where it contacts the phone, rotates, locks tightly by simply squeezing and releases with the push of a button.
Bought it at Best Buy, $19.95 US.

Any with a power supply hookup that are made specifically for the Kaiser?

meanvulcan said:
Any with a power supply hookup that are made specifically for the Kaiser?
Click to expand...
Click to collapse
check out brodit. They have ones that allow the screen to slide out and tilt, and have a cable to charge the device.
Their US reseller is proclipusa.com. to find a retailer in another country head over to brodit.com

meanvulcan said:
Any with a power supply hookup that are made specifically for the Kaiser?
Click to expand...
Click to collapse
I didn't want to spend too much money on a windshield mount. I just purchased a mount with a built in power supply from ebay for under $20. I'll report how it holds up when I get it.
http://cgi.ebay.com/CAR-MOUNT-HOLDE...3286.c0.m14&_trkparms=66:2|65:1|39:1|240:1318

Jealous!
fone_fanatic said:
check out brodit. They have ones that allow the screen to slide out and tilt, and have a cable to charge the device.
Their US reseller is proclipusa.com. to find a retailer in another country head over to brodit.com
Click to expand...
Click to collapse
OMG! That's awesome! If Best Buy's return policy didn't suck I would take mine back and get this one.
Link

I use this one, made for the job and works really well.
http://www.handtec.co.uk/product.php/1255/herbert-richter-htc-tytn-ii-jacket-grip

HTC OEM Case: Will it work for Fuze?

The case below is a horizontal pouch style. I am curious about the fit. IT was originally marketed with the HTC Touch Dual styled devices. Do you guys think it would be a good fit for the Fuze?
http://cgi.ebay.com/HTC-TOUCH-OEM-E...14&_trkparms=72:1240|66:4|65:12|39:1|240:1318
The other option for me is another OEM case shown here:
http://www.windowsmobilenow.com/us/p_wm_acc1.aspx?i=169487&partner=wmusfroogle
If anyone has either of these cases I would really like your comments on fit. I expect the finish will be similar to the finish of the HTC OEM Tytn case that I currently carry. Any help is appreciated as i need to protect her soon. My front pocket is not the ideal carry spot for me and the Tytn case is simply too big for the Fuze.

I'm using the S322 case, magnetic closure instead of velcro, for my T-Mobile MDA Vario IV (Raphael 300).
Bit tight in the early days, but works like a charm.

You mention that yours has a magnetic closure instead of velcro. Did they release both variants? Where did you purchase from and how did you ensure that you got the right one.

I bought it at a mobile phone shop in the nearest city, don't remember which one...
It was in an original HTC blister packaging, they removed it so I could try it on my Vario IV.
As I already stated, a tight fit, so I handed over 16 € and left them the blister packaging
It has one magnet, not as powerfull as the two in the TyTN case but strong enough.
Don't know about the velcro closure, it's not mentioned on the Dutch site, it's mentioned on the UK site and the Expansys site. (who are running the European htc accessory store)

Thanks for your input. Unfortunately, most US dealers never carry OEM cases, and I am forced to buy online sight unseen. I like a snug fit that develops into a perfect fit as you've described so I guess I just need to make my purchase.

aadadams said:
Thanks for your input. Unfortunately, most US dealers never carry OEM cases, and I am forced to buy online sight unseen. I like a snug fit that develops into a perfect fit as you've described so I guess I just need to make my purchase.
Click to expand...
Click to collapse
I actually saw the oem htc side case in BestBuy o.o In cell phones accessories. They had 100's of em! I was in shock. Never had I seen htc accessories in best buy. I found invisibleSHIELD and BodyGuardz for the iPhone and diamond too

Make my month by saying this was at a location within an hour or two of DC... PLEASE...
Was this the only one they had?
http://www.bestbuy.com/site/olspage...+case&lp=1&type=product&cp=1&id=1166840037625
I really want this one:
http://www.mobilecityonline.com/wir...=organic&utm_term=POS322&utm_campaign=froogle
I have the one from the Best Buy link. It came with an HTC phone I bought some time ago. I can't even remember which one. BUT, alas it is simple too big for the Fuze.

aadadams said:
Make my month by saying this was at a location within an hour or two of DC... PLEASE...
Was this the only one they had?
http://www.bestbuy.com/site/olspage...+case&lp=1&type=product&cp=1&id=1166840037625
I really want this one:
http://www.mobilecityonline.com/wir...=organic&utm_term=POS322&utm_campaign=froogle
I have the one from the Best Buy link. It came with an HTC phone I bought some time ago. I can't even remember which one. BUT, alas it is simple too big for the Fuze.
Click to expand...
Click to collapse
It's like the first one, but it fits the fuze. I mean I almost bought it, but it was $32. And sorry, this was in Cali.

Kraize said:
I actually saw the oem htc side case in BestBuy o.o In cell phones accessories. They had 100's of em! I was in shock. Never had I seen htc accessories in best buy.
Click to expand...
Click to collapse
I got my oem htc case for my fuze at best buy. Couldn't be happier with it.

Kraize said:
It's like the first one, but it fits the fuze. I mean I almost bought it, but it was $32. And sorry, this was in Cali.
Click to expand...
Click to collapse
venelar said:
I got my oem htc case for my fuze at best buy. Couldn't be happier with it.
Click to expand...
Click to collapse
Guys,
I will go to BestBuy to check this out in further detail. But in the meantime...
@Venelar,
Please post some photos of the phone in the case and out. I would love to see as many as you could post.
EDIT:
I went by my local BestBuy, and sure enough that is the exact case that I already have. IMNSHO that case is too large for the phone. I will be trying to secure the HTC PO S322.

Guys, I was on the HTC Forum where I saw this "customizable leather" case and some glowing reviews. It seems to be nice enough, and thought I would see any of the xda family had picked one up. I have never ween it mentioned here so I thought you guys would want to know. I think I'll order one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=390007490992

Shameless nudge in hopes of grabbing attention/opinions.

aadadams said:
Guys, I was on the HTC Forum where I saw this "customizable leather" case and some glowing reviews. It seems to be nice enough, and thought I would see any of the xda family had picked one up. I have never ween it mentioned here so I thought you guys would want to know. I think I'll order one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=390007490992
Click to expand...
Click to collapse
I just ordered one of the A1 cases. Did you get your case? how was it?

I purchased this soft pouch case ( http://www.mobilecityonline.com/wir...=organic&utm_term=POS322&utm_campaign=froogle ) from the store in NYC. It's a tight fit at first, it even peeled away my screen protector (2 of them) at first but it becomes just right after awhile. The velcro could be a bit better too...

xternal said:
I just ordered one of the A1 cases. Did you get your case? how was it?
Click to expand...
Click to collapse
I sure did! Me and several others have them now. I took several pictures and wrote up my thoughts on the case here: http://forum.xda-developers.com/showthread.php?t=462940&highlight=easecase Take a look...

Car Mounts, What you using.

which car mount have you got or want.
I have found several different types :-
http://www.gpsforless.co.uk/product_details.php?id=15320
http://www.easydevices.co.uk/products.asp?partno=HTCTHDHFK&model=
The Latter costs twice as much but will it mark the case been dragged in and out all day long.
any input would be appreciated.

Take a look at Brodit carholders/kits. Had one for my Tytn2 and it did the job good. Now i bought one for my HD. There are also many mounts for the holder especially for your car.
Clib for you car
Holder for Touch HD
Sorry is in Dutch

Brodit with the proclip! Excelent quality, won't bounch like some windscreen ones will do.

I can recommend Brodit with ProClip. (http://www.brodit.com/?lang=E)

Everyone here promotes the Brodit holder, but I understand that you have to buy a mounting device for your specific car? I change cars really frequently, so that would mean I would have to buy a new mounting device every time ??

There is a Blackstone accessories section...

Tesco special, £5.99.... what can I say, I'm a cheap slag
Potnoodle anyone?

I have the brodit mount, hardwired into the car (new Ford Mondeo). I do not change cars frequently (every 3 years or so) but do change phones frequently. Brodit is ideal as you can just screw the new mount on your existing clip, and the wiring is not to difficult as well. As I use the tomtom quite a bit on the phone (as I did on the cruise) it is very usefull having it charging all the time while in the car. Can definitely recommend

If you change cars very frequently, the Brodit holder is probably not the best solution.
It is true, that you would need a ProClip for every car you use, so that would be quite expensive.
There are better solutions for that scenarion, I guess.

K_Hismoom said:
If you change cars very frequently, the Brodit holder is probably not the best solution.
It is true, that you would need a ProClip for every car you use, so that would be quite expensive.
There are better solutions for that scenarion, I guess.
Click to expand...
Click to collapse
Well if he changes cars frequently, you can't tell me that a ~30€ clib then is expensive. My Point is Brodit has a good and stable solution without screwing upp you dashboard. When he buyes a new car just me sure the clib is included...with the buy No car salesman will let you go ....

Maybe they're just different rental cars or company cars, in which case I doubt he would always get a new clip.
Otherwise you're right, it should be no problem to get a clip with a new car.

K_Hismoom said:
Maybe they're just different rental cars or company cars, in which case I doubt he would always get a new clip.
Otherwise you're right, it should be no problem to get a clip with a new car.
Click to expand...
Click to collapse
That is indeed my situation. (I don't buy a new car every X months, it just changes every day ...)

ProclipUSA does not show HTC HD choice on their website. I am in US, and would like to buy the Brodit holder. Any advice? Thanks

michael_r said:
ProclipUSA does not show HTC HD choice on their website. I am in US, and would like to buy the Brodit holder. Any advice? Thanks
Click to expand...
Click to collapse
email Brodit direct. they will send you a USA supplier details.

K_Hismoom said:
I can recommend Brodit with ProClip. (http://www.brodit.com/?lang=E)
Click to expand...
Click to collapse
i wouldn't recomment the powered holders.
i had one for my HTC TYTNII and it damaged the mini usb socket on the bottom of the handset.
so just get the holder and use a loose charging lead.
so the set up in my car is:-
Brodit holder
on dashmount bracket (its metal and stronger then proclip)
HTC incar charger
THB cc9060 handsfree car kit with A2DP music

Brodit is the one!!
sparky steve said:
email Brodit direct. they will send you a USA supplier details.
Click to expand...
Click to collapse
I emailed Brodit a couple weeks ago. THey didnt have the Touch HD mount yet so i got the adjustable one. Works great!!!! Ive used Brodit for all my PDA's
They may have a mount by now.