Related
Hi,
I got this unit from ATT and now using with Cingular. I am trying to get to GPRS and internet settings for cingular. When I call them they say they don't know it since it is not their phone.
Is there anyone who managed to get the internet connection on another network? And how please?
Thanks,
Fatih
GPRS configuration
have the same problems. i got the MDA form T-mobile but need to use it with austrians mobilkom GPRS. I didnt manage to connect up to now!
I managed to get it working.
Here how it is:
Get the APN, user name and password info from your provider, and have your GPRS account activated.
For cingular users
APN: wap.cingular
USER: [email protected]
pWORD: CINGULAR1 (PAY ATTENTION TO LOWER/UPPER CASE)
Go to
>settings
>connections
>connections
>select "new"
>select "Cellular line GPRS"
>it will ask you APN
say connect.
Then it will ask user name and password. That's it.
Fatih
I'll try. thanx
Fatih,
I tried your settings and its ask for username, password, and domain. what should I put for domain?
No Domain Required
Just put in the info listed above. Then it will work great.
Good Luck!
fatih said:
I managed to get it working.
Here how it is:
Get the APN, user name and password info from your provider, and have your GPRS account activated.
For cingular users
APN: wap.cingular
USER: [email protected]
pWORD: CINGULAR1 (PAY ATTENTION TO LOWER/UPPER CASE)
Go to
>settings
>connections
>connections
>select "new"
>select "Cellular line GPRS"
>it will ask you APN
say connect.
Then it will ask user name and password. That's it.
Fatih
Click to expand...
Click to collapse
Sorry.....
that I didn't quite get it
after connected to the wap.cingular
what should I do next????
You mean add another new moden????????? :?:
Thanks for you help
SX 56
I use the settings for my sx56 and the internet only works when its connected to the cradle, I use comcast highspeed cable. any help in resolving this problem would be apreciated
Thanks for the info. Popped it in, everything's working great now.
Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
Hi
ON my nokia I had wap access to check headlines and football scores. How do I enable the same facility on an XDA ?
You need to run a seperate WAP browser, like EZ WAP. Search the boards here for EZ WAP and you'll find links to places to get it. Once you have it, there's a great WAP config description for T-Mo at:
http://forum.xda-developers.com/viewtopic.php?t=3675
Hope this helps
I've tried following the steps given in several different threads for configuring this on my XDA but have been unsuccessful. I've been trying to use EZWap to configure it, but it cannot connect. I think its something to do with my network connections on my phone that just arent right. Can anyone walk me through setting up the actual network connection settings for WM2003? Any help would be greatly appreciated.
i installed the mms from the O2 uk rom... (from zip posted here somewhere)...
i get mm2 notifications, but i cant download them...
any ideas?
WAP using IE in WM2003
Supposedly IE in WM2003 has support for WAP browsing. However, when I set up a "TZONES" connection and set up the AP to ( wap.voicestream.com ) and the proxy to ( 216.155.165.50:9201 ), and I try to navigate to:
wap.myvoicestream.com
It no longer works. However, if I navigate to any "regular" www page, it comes up just fine. Has anyone else successfully been able to configure their WM2003 ( TMobile PPCPE ) to access their TZones via IE using the WAP connection/Proxy settings ?
I was thinking of installing EzWap 2.5 again, but during the install it said it was going to replace wapdrv.dll and I wasn't going to run the risk of overwriting a necessary file, so I exited the installation of ExWAP.
Anyone gotten this to work ???
[/b]
Eureka !!! You don't need EzWap or Klondike !!!
<Edited - It was LarryH from Horward Forums who originally helped me out with this...it was his idea to try out a different URL monicker. Thanks again Larry ! >
With LarryH's help, we've discovered that it IS possible to access T-Mobile's TZones pages once you've undergone the upgrade to WM2003 from T-Mobile's SITE.
After you set up your connection to use the WAP accesspoint:
wap.voicestream.com
Under Proxy Settings:
WAP: 216.155.165.50 port: 9201
SWAP: 216.155.165.50 port: 9203
You don't have to set the HTTP or SOCKS,
as TMobile doesn't support SOCKS, and the HTTP port ( 80 ) is already open on their gateway server.
To access your TZones homepage, just open IE, and enter:
wsp://wap.myvoicestream.com
apparently entering:
http://wap.myvoicestream.com
will confuse IE in WM2003 for PPC, and
it will say "Unable to find page".
Everyone, enjoy your TZones under WM2003.
Marcelo
but my MSN Messenger don't work
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
do i need to set up something else? or purchase other data plans from tmobile?
Re: but my MSN Messenger don't work
yfei said:
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
I just tried that on my PPC PE and I was able to sign on to MSN Messenger. Are you sure you have the Connection you set up to access the proper proxy address and ports. Make sure you setup the user/password for your msn account properly, because if you type it in wrong, it won't let you log in.
Let me know if you run into any problems.
Marcelo
Click to expand...
Click to collapse
Awesome !!!
Now I can have MSN Messenger using T-Zones / WAP access. This is wonderful.
Now with just WAP, I have acesss to port 80 & 110 and MSM messenger.
Thanks a bunch!!!!
-JB
t-mobile UK ??
Does anyone know the WAP settings for t-mobile uk ?
OK my settings are:
cellular line GPRS
access point name: wap.voicestream.com
user name password and domain all blank
proxy settings this network connects to the net check
this network uses a proxy server to connect to the net checked
proxy server is 216.155.165.050
under the advanced part all but socks are set to same IP
WM2003
I connect to GPRS but it says page cannot be found
any ideas why?
figured it out and took out the proxy stuff and access the web now.
I would also like the uk settings and a fool proof step by step instruction, please.
Thanks for any guidance
Hi All
I have a MDA compact T-mobile. However, Im using Vodafone Network.
Does anyone know the GPRS settings for Vodafone UK and how to edit them?
I appreciate your help.
Alan
set the access point to internet
set the user name and password both to web
that's it
Hi
Thanks for that. How about the MMS settings?
I have set some in. But when I go to send the MMS, it says MMS sending for ages.. and I get a BOLD G on the title bar. Also, what does this mean? does it mean I'm connected or I have the option to contect?
Thanks.
cwwong said:
I have set some in. But when I go to send the MMS, it says MMS sending for ages.. and I get a BOLD G on the title bar. Also, what does this mean? does it mean I'm connected or I have the option to contect?
Click to expand...
Click to collapse
Attached Vodafone UK GPRS settings for contract. Let me know if you need payg version.
Try sending yourself an MMS first and then should all be ok - don't ask me why but I had the same problem and this suggestion worked for me.
The bold G on the title bar means that you have GPRS coverage.
Hope this helps,
OB.
Thanks for this..
I will try this and let u know!
Thanks.
This works a treat. Thanks.
To add to the 'can't send MMS' list of hints...
Additionally if you still have trouble sending MMS I found that if you delete the "\storage\Windows\MMS Log" folder and then send yourself an MMS all should be back in working order...
OB.
hi,
i need a pay and go vodafone settings. please can you upload. i cant connect to gprs.
i will be moving to India on Idea network after a months. So can anyone tell me the settings for that.
i have UK XDA II unlocked.
thanks
Here are the Vodafone PAYG settings - copy to PPC and click to install
No idea about India Network - None posted on official i-Mate wesite (www.clubimate.com) - Suggest contact them direct and ask...
OB.
spot on.. working already now... thanks
and can you also upload the settings for VIRGIN PAY n GO...
thanks
Here is Virgin - seems only to be one version as I think Virgin is all a type of PAYG...
OB.
hi.
thanks for that... virgin is working fine now... the thing is that when i installed Vodafone settings, it erased all the previous ones... now when i added virgin, vodafone has been erased...how to keep both
thanks
How to keep both!? Good question...
Only thing I can think of is to keep a copy of the cabs on your SD card (use CABINSTL so as not to delete after execute) and install as needed...
OB.
daduddaman said:
set the access point to internet
set the user name and password both to web
that's it
Click to expand...
Click to collapse
Just got my I-mate and have set up the GPRS for Vodafone UK Contract. I can successfully connect using the VF WAP Connection and VF MMS connection, but if I try the VF Internet GPRS connection, I get every time the error message 'The answering modem has disconnected'.
Anyone any idea how to fix this?
I can only load wap pages using the WAP connection and can't view any html sites. One of the main reasons I traded in my nokia 6230 was to browse html on a bigger screen.
Cheers,
Antoine
'The answering modem has disconnected'
toine said:
daduddaman said:
set the access point to internet
set the user name and password both to web
that's it
Click to expand...
Click to collapse
Just got my I-mate and have set up the GPRS for Vodafone UK Contract. I can successfully connect using the VF WAP Connection and VF MMS connection, but if I try the VF Internet GPRS connection, I get every time the error message 'The answering modem has disconnected'.
Anyone any idea how to fix this?
I can only load wap pages using the WAP connection and can't view any html sites. One of the main reasons I traded in my nokia 6230 was to browse html on a bigger screen.
Cheers,
Antoine
Click to expand...
Click to collapse
Hi - I have exactly the same issue with Jam/Vodafone UK/contract/GPRS. Has anyone out there got this combination working successfully?
TIA
Graham
Yes, I have, check out the conversation in http://forum.xda-developers.com/viewtopic.php?t=24848
If you can't get it to work with the details in there, give me a shout.
Cheers,
Toine
Thanks Toine. I saw the other thread after posting here.
You said you cured the problem by implementing gprs proxy settings. Can you please post exactly what settings and where you entered them?
Rgds
Graham
Graham -
I have two connections set up:
Vodafone MMS:
Modem: Cellular Line (GPRS)
APN: wap.vodafone.co.uk
Username: wap
Password: wap
Vodafone Internet:
Modem: Cellular Line (GPRS)
APN: wap.vodafone.co.uk
Username: wap
Password: wap
http proxy: 212.183.137.12:8799
and it works for me.
Cheers,
t
Thanks again Toine,
I've made progress - now able to browse WAP and Web sites - but still cannot get to my POP3 mailbox.
Could you check your reply? Did you mean to list "wap.vodafone.co.uk" for both connections? If so then I'm really confused... :?
Also, are both connections under "My Work Network"?
I've listed my full config below.
At present I can connect to WAP and Web using the "Vodafone WAP" connection, but if I try to get to my mailbox it says "Unable to connect: Ensure that your work modem is present and inserted correctly, and no network card is present."
The Vodafone Internet connection (using APN of "internet") still refuses to play, saying "The answering modem has disconnected."
i-mate Jam
ROM version: 1.12.00 WWE
ROM date: 05/28/05
Radio version: 1.12.10
Protocol version: 1337.42
ExtROM version: 1.12.131 WWE
My Work Network
Name: Vodafone WAP
Modem: Cellular Line (GPRS)
APN: wap.vodafone.co.uk
User: wap
Password: wap
Domain: *blank*
Advanced:
TCP/IP: Use server-assigned IP address
Servers: Use server-assigned addresses
Name: Vodafone Internet
Modem: Cellular Line (GPRS)
APN: internet
User: web
Password: web
Domain: *blank*
Advanced:
TCP/IP: Use server-assigned IP address
Servers: Use server-assigned addresses
Proxy Settings:
Proxy Server: 212.183.137.12
Advanced:
HTTP: 212.183.137.12:8799
WAP: 212.183.137.12:9201
Secure WAP: *blank* :9203
Socks: 212.183.137.12:1080
Socks 4
Rgds
Graham
wondered if anyone could help me, im trying to set up TIP in wm6, ive emailed tesco and theyve sent me the settings which are:
SIP Protocol
Domain: sip.tescointernetphone.com
Proxy Server Address: sip.tescointernetphone.com
Proxy Server Port: 5060
Registrar Server: sip.tescointernetphone.com
Registrar Server Port: 5060
Outbound Proxy: sip.tescointernetphone.com
Outbound Proxy Port: 5060
SIP Signalling Port: 5060
SIP Data Port: 5004
User ID / Authentication Name: Tesco Internet Phone Number
Authentication Password: Tesco Internet Phone password
ive entered them in using the sip config tool, i can now recieve calls but when i dial it says number may be invalid.
Any help would be great
Need help on the same thread
How do i set up VOIP using Tesco's VOIP service. The internet phone supplied by them is not a valid PPC application ! I'm based out of India and I get a lot of voicemails on my Tesco no. Would be great if i'm always connected
fring and tesco sip
being trying today and set user as phonenum of tip, pass as password set up, proxy as sip.tescointernetphone.com in fring, and it rings on incomming with caller id, but hangs up when answered, and out does not work, it hangs up before first ring. i assume it is not negotiating a audio codec stream channel between end points, but the sip protocol layer is working to inform.
i hope it does work soon, as it is a bit of a pain in the arse.
trying this at moment
http://wiki.xda-developers.com/index.php?pagename=VoIP_on_Windows_Mobile_6 and
ftp://xda:[email protected]/WM6VoIP.CAB
and
http://thinkabdul.com/2007/04/25/sip-config-loader-free-utility-to-automatically-configure-load-_setupxml-file-for-sip-voip-on-windows-mobile-60-device/
gets TIP available on a 3g network with data plan.
will try calls later after top up
no need for fring
Anyone else having any problems / luck getting this up and running?
I using these settings from the first post above, but get the "No Service" error on my device. sipgate settings work fine and I can use the same TIP settings in XDA-Lite without any problems at all!
Hi.
I have never tried to set up tesco on WM but have manged to get it to work on Symbian. The way I got it to work was to leave the proxy settings blank and just filled the registrar settings with 'sip.tescointernetphone.com'.
It was alot of trial and error. I'm sure you can do it.
Good luck.
Tesco Internet Phone
Had no luck with the voip in wm6, so been using this software, using tesco iax settings.
USER= Tesco Internet Phone Number
PASS= Tesco I.P Password
SERVER= gateway.tescointernetphone.com.
Not as nice looking as keypad ets in wm6 but works ok.
It used to work
I did get it working at one point, but it has been No Service for many months now.
PPC-IAX works
Just wondered about the other settings for input and output.
Tesco Internet Phone settings on fring
download fring on your mobile
register and then login
then click on sip
go down the list list and choose other
you will be asked to enter thefollowinguser:
ID enter your tescointernet phone number
eg 0207432****
password enter the passwrod for your tescointernetphone it is the same one as the one for the account .
proxy address type the following : sip:voicedot.net.uk.sbc.lon.uk.voicedot.net
enjoy tescointernetphone on your mobile
the good thing about fring it can connect you via 3g connection or a wi fi connection . 3g connection is better quality but you need tocheck with your phone provider if they will charge you for the data use
http://www.fring.com/fring_is/why_fring/
goodluck