This may sound totally ridiculous to most of the posts that I found regarding volume on the Hermes (most problems being volume too low), but for me, it's just the opposite. I just got my 8525 and ran the SIM unlock and updated the radio to 1.51. Then, when I went to listen to mp3s via headphones, I realized that the volume was too loud and that the system volume barely affected it. When it was near 0, it would still be too loud, then when I lowered it all the way, it would just be muted.
I know that I can use an in-line volume adapter to lower it, but it's another adapter to connect to the one that already has to convert the mini-USB to 3.5mm and would just make it bulkier.
Are there any software / registry hacks to lower or increase the volume sensitivity control?
the OEM headphones have a volume control on the side, is that not working?
I'm using an adapter to use my own headphones. I tried looking for an adapter that had a volume control, but haven't found one yet. Anyone find one that does that?
emmfan i have the same problem as you. I also have the USB adapter (htc speedport>3.5mm, standard usb, htc speedport) and using my 3.5mm headphones is just WAY too loud. even the default system sounds are painful to listen to, so that throws listening to music out the window. The strange thing is thatI vaguely remember this NOT being a problem... either way, I have the same symptoms as you. The system volume sliders do extremely little in way of volume changing, too... I'd really like if there was some way to fix this, because now my investment in the Adapter is going to be a waste..
Hmmm, I don't remember if the WIZARD had a 2.5 or 3.5 connector but it had a VOLUME CONTROL. Maybe (in worst case with an additional adapter from 3.5 to 2.5) it will work properly?
I ended up getting an additional adapter for volume control (http://www.amazon.com/Shure-EA650-C...?ie=UTF8&s=electronics&qid=1193240874&sr=8-1), which made the cable ridiculously long. Too bad they don't have a mini-USB to 3.5mm adapter with a built-in volume control. I also noticed that I lost some sound quality when I used the volume control adapter.
I finally decided to try a bluetooth headphone adapter and went with the i.Tech Clip R35 (http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02030). The sound wasn't so good with winmo5, but now that I upgraded to winmo6, it's a lot better. And no more unnecessary adapters and cables, plus AVRCP makes controlling music even easier.
Sorry to bring up an old post, but haven't been able to find a fix yet. Anyways, I am having the same volume problem. The system volume is on the next to the last click, and media player is down to 5%, and it's still way too loud. Any help? I updated my 8525 to Schlap's 4.22 if that helps.
could that be some kind of bug? i cant imagine what its like at 100% with max system volume. lol..
i listen to music with in-ear earphones via usb-3.5mm adapter too.
i put the system volume to level 3, sounds beautiful to me.. neither loud nor soft. and volume of incoming calls/sms tones are just nice too..
the volume of music doesnt change much by adjusting the volume of the media player, its more dependent on the system volume.
and i found out that if your system volume is, for example, 50%, the volume of the media player is actually capped at 50%. that means there is no difference if you increase the player's volume beyond 50%. (applys to htc audio manager, not sure about wmp)
btw im using softbank x01ht with official htc rom
does your media player app have an equalizer/pre amp function (TCPMP) you can turn that down or disable the EQ making the volume lower
madman604 said:
does your media player app have an equalizer/pre amp function (TCPMP) you can turn that down or disable the EQ making the volume lower
Click to expand...
Click to collapse
I've been using windows media player, but also tried HTC music player. Same thing for both. I have also tried the equilizer both on and off, and different settings. No difference, what so ever.
Since I received a 'extUSB --> 3.5mm' converter today I've the same problem.
Just to loud even when everything is put on the lowest setting possible.
Anyone a solution?
After upgrading to Windows Mobile 6, this doesn't seem to be a problem. But most of the time I am using Bluetooth headphones which also work much better in winmo6.
Not here.
Sadly, I have the same problem
Playing a song on Windows Media Player with left volume slider down to 1 click and volume of player at 5%. Still way too loud for office use without headphones.
I just tried it with TCPMP - the same song - and volume contorl knob for TCPMP fixed the problem. Anyone know why Media Player is doing this?
I've received today a new headset I ordered for my Hermes. It's the HTC U110 Headset Audio Adapter with 3.5 mm audio jack.
The headset has no volume control and now the volume is way too loud (and noisy).
Is there already a solution for this?
jerroen said:
I've received today a new headset I ordered for my Hermes. It's the HTC U110 Headset Audio Adapter with 3.5 mm audio jack.
The headset has no volume control and now the volume is way too loud (and noisy).
Is there already a solution for this?
Click to expand...
Click to collapse
Take a look at this, it works for my Diamond.
http://forum.xda-developers.com/showthread.php?t=424565
Related
Hi All,
Anyone else consider there headphone output volume a little low?
I just went from a HP hw6965 to a Dopod 838pro and whilst listening to tunes through media player with the same headphones at volume 100% and the scroll wheel fully turned up, the dopod volume is considerably lower that the HP.
It's hearable but just not "loud" when at volume.
Am I missing something?
anyone or am I deaf?
I agree, I've had the hermes and several different htc smartphones, none of which had good "driven" sound levels.
The headphones don't help either, they leak sound really badly and don't really fit in my ears properly either.
ok, so I'm not going deaf. looks like time a got a headphone amp.
I totally agree. The volume level is just to low.
Isn't there a reg entry that can fix this?
yeah the volume is to low ;d
i had pocket player installed and raised my equilizer to tha max for a higher volume
Hi,
I bought a Seidio Audio Adapter - miniUSB To 3.5mm - with One-Touch/Mic at the XDA store. It works great and I have no problem listening to music with my sony headset since you can adjust the volume with audiomanager. However when I am on a phone call it is super loud and I cannot adjust the volume. I looked around for a registry tweak but they usually talk about BT or speakerphone. What I want is the actual volume on the wired headphone. Can someone help? I am going deaf here!
Bump. This info is much needed. Please help.
So it didn't come with an inline manual volume adjuster? Sorry if that sounds like a ridiculous question. I'm looking for an adapter too and this is the first time I realized this might be an issue.
So to sum this up if you change the incall volume of the phone it doesnt change the output volume in your earphones? This seems rather weird to me because usually changing the output volume of the phone shouldnt allow the earphones to get louder tones...correct me if I'm wrong.
hi everybody i love my legend but i'm really disappointed with this issue: even at the minimum, the volume is too loud too listen it with hearphones...
Is there an app to fix it?
Trying another rom could fix it?
Thk you
Got same issue
logoo said:
hi everybody i love my legend but i'm really disappointed with this issue: even at the minimum, the volume is too loud too listen it with hearphones...
Is there an app to fix it?
Trying another rom could fix it?
Thk you
Click to expand...
Click to collapse
Hey, I agree with what you've said above. I have the same issue. Please note that I have no direct solution for you, but the work around is this:
Use a different set of headphones. I have three sets I use.
1) pair of ear buds that came with the legend - these are fine when I turn the volume down low
2) Phillips SHS3201 - these are basic ""over the ear" hook style ear buds. volume is fine if I turn it down between first second "notches".
3) Monster Audio Turbine ear buds - foam sealing passive noise canceling. These are too loud even at the lowest setting. I think they have powerful drivers that simply boost the sound and foam fittings that drive the sound into my ear canal. Though they sound great, I can't really use them because they are too loud on the phone.
Are you using a high quality or "foam sealing" headphone?
That being said, I'm interested if anyone else knows how to adjust this!
Thanks.
Thk you for your reply I've not found a real solution but you're right i think i'm gonna buy earphones with external volume adjustement because even with the original legend ones, it's too loud
There is another way to fix it but i don't like it.. You can change de volume of your mp3's by using mp3 gain (freeware). The volume is better but if you want to connect the legend to a loudspeaker, you realise that the sound has unfortunately a very limited volume...
I am interested in this as well. I have tried the Music Player with EQ platinum (by changing left and right channel to output lower volume) but it kills the CPU. If you view photos while listening to music, you might not hear any music anymore.
Same here. It gets very annoying when the phone rings while I'm listening to things on my earphone - it hurts my ear everytime. (I have ringer set to max volume, which seems to make the ring tone play at max volume through earphone as well. I can barely stand min volume as it is.)
I've already rooted my phone - I guess changing the audiopara files should do the trick. Can anyone tell me how to understand those files?
Sent from my HTC Legend using XDA App
I am using j-jays intra earphones and the Legend really disappoint me about the sound quality (volume setting).
So I tried to set EQ as down as possible... what there is no EQ on Android's music player? f****!
Finally I have found and used Astro Player beta on the market, wich is not very good-looking but has a complet EQ.
And an other problem about Legend sound quality appears: the sound in noisy at low volume!!!
Ok let's hope a flash will correct the problem. For the moment I am using my Sansa clip+ to hear the music in my bed and my legend with RockPlayer to watch movies in my bed
Volume issue Android
I've been having an issue with the volume being too loud when streaming music via pandora or last.fm
To check to make sure we are all having the same problem, follow these steps and report back.
1. Play media (music) w/ headphones
2. Turn off silent mode
3. Go to Settings/Volume
4. Edit the volume of the ringer (it will play a test sound)
5. Accept changes...
Now, did the volume go down on the media so it's nice and quite? If so, how long does it last? I know this works for me for the rest of my current song, but as soon as another one starts it's back up to crazy loud volume (even when the media volume is set to smallest amount).
I have also downloaded a 3rd party volume control app, but the same thing happens. Please give this a shot and let us know what happened!
I am having issues with volume through the bluetooth audio. I am unable to find a mp3 player that has a preamp included in the equalizer. Is that not possible through android??? This is my first Android phone.
Is there a hack to boost volume?? Or is there a player that boosts volume??
I have to fix this fast...I work in a factory and need to hear my jamz
There's not a hack for it yet.
anyone know of a player with a preamp??
I was thinking the same thing, the volume is very low when playing music. I've tried with both my Bose In-Ear and Klipsch S4 headphones; both were barely audible above a lawn mower.
I agree volume is low,....waiting on an app, hack,...something.
so has there been any advances in volume boosting???
my main concern is my bluetooth volume...i need an mp3 player with a preamp or something that actually boosts system volume...
anyone????
I commited my volume hack to my github about a week ago, toast pulled it so now any kernel using ToastCFH's source will also have my audioboost code in it.
It in theory should boost the output volume of every interface on the device, but the only two that I've noticed to show a real increase are the phone headset (in call one) and the Bluetooth line out.
I don't know what kernels use it ATM but I know the FPS fix for Novatec panels implements it, just look around, most probably have it by this point since it seems like everyone is using toast's source.
Its not all BT that is quiet though. The Jawbone Icon is pretty quiet, as was the Blueant T1. BT audio through the LiquidAux is ok but not super loud. But the Moto H17txt is, well, louder than hell! Have to turn phone bt vol almost all the way down. 4 diff devices, 3 volume levels...
My concern is just with audio out through wired stereo headphones. I consider myself a self made audiofile and the dynamic quality of the audio output of the EVO is lacking IMO.
One way to go (audiophile quality, but pricey) is the Headroom total airhead. $99.
Runs on 4AA's and is 1/8" in and out.
You can find the older versions for less on e-bay.
I've got a headbanger amp, same basic thing as the Headroom.
Link also has some cheaper options like the boostaroo.
If you are DIY, there's instructions to be found to build the headbanger too.
JAson
Edit: Still can't post links so just google headphone amp and you'll be heading in the right direction.
Just an idea, google search "mp3 gain" this will normalize youre mp3s but you can also boost the volume by using a higher gain level when you normalize. This will clip the mp3 but i just kept a copy of the original file. I set mine to 110 percent then applied. Worked great.
Sent from my PC36100 using XDA App
Did a search, but "A2DP Volume" returns mainly headset reccomendations etc.
Just got a Altec lansing T515. Bargain at just £15 inc p+p!
Paired up fine with the HD2 and seems to work great so far (for the price).
My only dissapointment is that the volume controls on the phone do nothing to the volume of the headset/speakers.
I was really planning on getting some good use out of this wireless audio through a better amp and speakers but would really need to be able to use the HD2 as a remote control (Inc volume control).
Is there an app/utility/reg hack that will let me adjust the A2DP volume directly on the HD2???
Any and all advice greatly appreciated.
Cheers.
try it with windows media player and not the htc sense music player
Thanks mate, tried that.... same deal (almost).
When I adjust the volume inside WMP it still does nothing to the volume of the speaker/headset BUT when I press the mute button or lower the vol to 0% the sound on the BT Speaker DOES mute.
Also at one point I did get some funky 'pairing' problem where the wireless volume was changing using the HD2 volume rocker but the sound quality was terrible. Not sure what happened but I switched off/on bluetooth and when the devices paired again - the sound was back to good quality but the volume no longer worked.
Can anyone please confirm that I should be able to control the volume using the HD2 on ANY A2DP headset/speaker?
I'm currently using EnergyRom Maxsense 23xx 24th July.
Might switch to the 21July 23121 CHT ROM instead to see if that changes things.
But can anyone first please confirm that this SHOULD be working? or let me know of a regHack /cab/app I need to use or apply to get this 'remote volume' working?
Anyone help on this ^^^ please?
Same problem here with expensive Sony headset and reasonably priced JVC. Report it to HTC as a fault. No fix yet afaik
hmm well im getting my jaybird sportsband in a few days through mail, ill report in on if they work or not
This problem i have with all my bluetooth headsets ( i have had 3 ) and also have with the altec lansing soundblade (a bluetooth speaker - really cool)
the problem is that the volume control in software only effects the audio drive,a but A2D2 driver is on a different path so not affected.
For me has not been a problem because volume is always outputted at max via A2D2 and then i use volume control on the headsets or the speaker to reduce as required.
But i see if you have a headset without volume control then this can be a major problem.
Only method i did find to adjust volume via software was install SRSwow and in the options it is having 2 gain settings, input and output. Adjusting these does affect A2D2 volume.
I know its not a fix but it is a work around that may be usefull untill someone has a better option for you
Thanks very much for your input peeps!
rumpleforeskin: (Funniest name Ive seen all week lol)
Sounds like its not just a problem with my headset/speaker (or headset / ROM combo).
Ive got volume controls (which do work) On the headset adapter and on the speaker, but I REALLY want/need to be able to control volume remotely as I was planning to link the adapter to an amp without a remote control.
Looks like SRSWow might be the solution for now....I'll give it a try and report back tonight.
Thanks again for all your help chaps.
I actually fear this could be a demonstration the output audio is hardware wired and not software driven, thus meaning full incall recording will never be possible.
ephestione said:
I actually fear this could be a demonstration the output audio is hardware wired and not software driven, thus meaning full incall recording will never be possible.
Click to expand...
Click to collapse
doubt it man, on the iphone 3gs on 3.0 u couldnt switch the volume of the headset through the phone but now with the 4.0 software u can , so its just a case of misssing software.
I use tcpmp and I can control the volume from the software while using my BT headsets (peltor)
rumpleforeskin said:
....Only method i did find to adjust volume via software was install SRSwow and in the options it is having 2 gain settings, input and output. Adjusting these does affect A2D2 volume.
I know its not a fix but it is a work around that may be usefull untill someone has a better option for you
Click to expand...
Click to collapse
Tried this ^^^, Works great for everything, thanks!
Only slight problem is a ~4 second lag between adjusting the volume and the change in actual volume.
Dont suppose there is any tweak to remedy this??
Thanks again for the help.
cubalibre79 said:
I use tcpmp and I can control the volume from the software while using my BT headsets (peltor)
Click to expand...
Click to collapse
This ^^^ works perfect! No lag when changing volume or anything! Great for music and video.
Thank you very much!
Cheers guys.