Upgraded to WM6, now cant connect - MDA III, XDA III, PDA2k, 9090 ROM Development

I recently upgraded to wm6 and now I cant connect to the internet at all. I know that before that I had to enable my GPRS and I could get on the net while on the road. Any ideas?? Or if someone could tell me how to make my phone work in 3G...Thatd be appreciated. I believe that it is supported by my provider.
thanks

are you sure, you had correct setting for your gprs? mine works perfectly.. please remember that in wm6 you no longer have 'auto configuration', you should re-check the settings.

Related

Solved my GPRS re-connect problem

Many of you on this bb has a problem that GPRS doesn't re-connect and you have to reset or turn flight mode on/off to get connected again.
Here is what I did and mine has now been working for 3-4 weeks as it should be working. Shows to me that none of the software like Wisbar, Pocket Plus etc is causing it.
In SETTINGS/CONNECTIONS, under CONNECTIONS I have My ISP and My Work Network. Under both I used to have WAP, where it will use GPRS to connect. I have deleted the WAP GPRS option under My Work Network, to have nothing under Modem Connection, I only have WAP GPRS under My ISP in the Modem Connection.
Also, I used to have my work's settings in VPN, which I have also taken out. When I activesync via GPRS, my phone used to connect to the GPRS server and then tried to connect to VPN. After that I couldn't re-connect with GPRS.
After I have done the above, my phone now connects flawlessly everytime using the actievsync mobile schedule and when connecting manually.
O yes, I also run GB-Soft's GPRS tweak which can be found at http://www.GB-Soft.cz/XDAII
Well I was very sceptical about this. But I too deleted the WAP settings under Work and in the last month I haven't been unable to connect once.
So either this works or O2 have solved a problem with their network (I did not have the problem last winter in Singapore, Malaysia, or Australia iirc.)
The only other difference to my setup is that I now use Activesync 4.2 rather than 3.x
I am on Vodacom in South Africa, and what I have done above works for me. I only reboot my phone now to clear memory to free up some or when I need to run my GPS software, then I reboot to give it as much memory as possible.
I posted a solution that works for me, use, don't use it, up to you.
Hey, I was saying thanks - I believe it works
kevino said:
Well I was very sceptical about this. But I too deleted the WAP settings under Work and in the last month I haven't been unable to connect once.
Click to expand...
Click to collapse
Sorry, my mistake, this part was confusing, as it looks like you couldn't connect.
Yes,
"I have always been able to connect first time" would have been a lot better than the double negative :lol:

atom wireless settin

Does anybody noe how to do the settin for the wireless in atom.. i can search for the wireless but mine always will auto connect to GPRS.. whenever i wanna use internet it will auto connect to GPRS.. can't change it to wireless.. pls teach mi the way to do it cos i'm new to atom.. thkss..
i am getting the same problem for my atom exec too... Does anyone know how could we set so that we can access the internet using wireless....
Thanks
i didn't understand well the problem
but did u turn on WiFi first?
Me too I turn on Wifi and connect to my Work Wifi but whenever I launch IE or MSN messenger GPRS Wap is launched anyone can help??
coldfire said:
i didn't understand well the problem
but did u turn on WiFi first?
Click to expand...
Click to collapse
The wifi was turn on and it did search for networks. But what i want to know that, is there any particular setting we need to do to the options so that we can connect to the internet smoothly.
Thanks

s200 no internet

Hi, i'm using qteck s200 and room cristal v5.1. i tried to connect to the internet by the mobil service but i can't, can anyone help me?
migasvic said:
Hi, i'm using qteck s200 and room cristal v5.1. i tried to connect to the internet by the mobil service but i can't, can anyone help me?
Click to expand...
Click to collapse
Have you set up the internet connections? If not, use something like HTC Connection Setup to create all the settings, and then try again...
ialredy try htc connection and also manage the connection manualy, whit the information that my service provider told me, but stiil not working
You need to be more specific.
Describe exactly step by step what you did and what error message you are getting when trying to connect.
When you set up the connection manually did you place it under "My work network" or "My ISP"?
You may need to go to Settings->Connections->Connections->Advanced->Network selection and make sure that what is written there matches.
Also, verify with your cell provider that your account has a data plan. You may not be able to connect if you do not. (And even if you can it will be very expansive)
Thanks levenum, but i alredy solved the problem! since i had put the room cristal v5.1 i had lost all the gprs connections to the internet, there was no way to connect whit the pda whit that room, even with the htc connections wizard! i change to a cloudifas room and bumm, internet working, thanks anyway!!!!

I cant connect to wifi

Guys I have a Cingular 8125 unlocked. It currently has the Cingular firmware on it. When I first bought it, it would connect fine to the internet. Now if I turn on wifi it will still find the signal and ask me if I want to connect and I click ok to connect to internet. But when I go to IE and type somethin in it says "connot connect with current connection settings. to change you connection settings, tap settings" I have tried many things. Im just not sure what to do. If you guys could help I sure would appreciate it.
thanks
Anyone? I need help
Have you disabled the proxy?
excuse my stupidity but what do u mean?

3G and HSDPA cannot connect!

Hi I need help. I tried everything, I guess, but still my 3G and HSDPA is not connecting to internet, my GPRS does. Though my network provider said that GPRS setting is same as the setting for 3g, I cannot connect. I made many times to auto-configure my connections using the default app of my WM6.5, it is still the same. Anybody have the solution?
Thanks in advance!
possible fix
I dont know if this will help but i had the same problem when i first upgraded to wm 6.5 but as im on a different network it may not
.
This is how i managed to fix this problem.
First i had to hardreset my phone.
then When the automatic connection setting setup menu appeared i pressed no and then disable.
I then entered the setting my provider gave me manually, in the connections option on the setting menu.
And HSDPA worked.
Like i said that how i had to fix my phone.
If i use automatic coonection setup no matter what i do after that i cant use HSDPA.
Hope this help

Categories

Resources