hallo, i have upgraded with sd flash mode my artemis from orange brand to ARTEIMG-new (italian), but after upgrade gps does not works i tried tomtom and not works , the same with visualgps.....someone can help me please?
thanks
correct com-port selected ?
nibis said:
but after upgrade gps does not works i tried tomtom and not works , the same with visualgps.....
Click to expand...
Click to collapse
Is your gps set to com4 ? check this and try again (settings - hardware - external gps)
i ve default setting: gps port com 4 while in setting-----hardware -----external gps i see none selected
someone can help me please
nibis said:
while in setting-----hardware -----external gps i see none selected
Click to expand...
Click to collapse
Did you change this setting to COM4 ?
if i change to com4 it says impossible has the same port
GPS Settings - External GPS
Maybe this post will help you too.... (but this guy didn't choose built-in gps as in my last screenshot, just read his post and try...)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yes i ve the same setting, i read post you link, but i tried all configuration and port and not works.....i dont know what to do ....maybe gps is only crashed
did u solve the problem?
This mobile is french orange brand ?
If so you need to use kulubt0r patch to make it work.
Related
i have a problem with bluetooth on my hd, after installing 6.5 build 21877 which is by the way very fast and stable i cant seem to accept any incoming bluetooth sessions while i still can send and pair devices so plz help me
zahang said:
i have a problem with bluetooth on my hd, after installing 6.5 build 21877 which is by the way very fast and stable i cant seem to accept any incoming bluetooth sessions while i still can send and pair devices so plz help me
Click to expand...
Click to collapse
Turn on "beam" as well as "bluetooth" options, in the connections section.
first i whould like to thank you for this fast answer but unfortunatly when i turn on the beam the mobile gives me the screen to select my country and the operator in other words the connection setup tap, if there is any thing else it will be most appreciated
if I click
settings->connections->Beam
I get this screen
never heard about anybody getting questions about country or operator
as Beam was present in pocketpc way before any of them had phones in them
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks for the reply but still i have no item called beam in my onnections tap
i only have beam in conn manager maybe its with the rom it self if anybody has passed over this plz advice cause i really hate to flash another rom since this one is pretty gr8
Seems like your rom is missing a few core parts, and might not be as great as you think it is. Anyway I'm pretty sure the problem is that beam is not enabled. There will be another way to enable it, but I don't know of it.
So i read the 'CORRECT Hardware GPS Fix' for samsung SGS, and i thought: This should be possible for the spica as well..
The SGS contact:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Considering that the gps contact on SGS looks the same as on the spica, it should work just bending it.. I've tried gently bending it up just a bit, with no progress. I'm thinking of opening up the spica bad boy again and bend it up some more.
Has anyone else tried this? Does anyone know if this is possible?
Unfortunately GPS behaviour on Spica is related with baseband and rild libs (mostly libsec-ril.so), for some combos of baseband and libsec-ril GPS works fine, for some it barely works.
I didn't try hardware fixes, but XXIL2 baseband with XXJF2 libsec-ril.so makes GPS working fine (up to 8 sattelites fixed, fix time under 1 minute without clear sky)
Thanks gen_scheisskopf,
So basically, i should re-flash my phone to XXIL2 baseband and use the libsec-ril.so (which u put in system\lib, right?)
EDIT: Ah ok i noticed there's a zip file which u install in recovery mode after you've flashed the phone to the correct baseband version.
thx,
gudding said:
So basically, i should re-flash my phone to XXIL2 baseband and use the libsec-ril.so (which u put in system\lib, right?)
Click to expand...
Click to collapse
I can't say if xxil2 baseband will work for you for sure, be prepared to experiment with others also.
Look at here : forum.samdroid.net/f28/working-gps-finally-we-have-2-1-2-2-a-3880/
I tried it and it's working!
Hello everyone!
I have installed Windows 10 Mobile on my Lumia 925!
I have upgraded it a lots of times before I got to build 15254 (with registry hacks of course)
So here's the problem...
Before updating to build 15xxx (my Lumia was in build 14393) the Bluetooth pairing worked normally!
I could connect and pair devices!
But after updating to build 15067 the problem came...
After upgrading, the Bluetooth could pair devices...
But after reboot it just says "Couldn't connect"!!!
I can now only pair through "Connect" but only my headphones ! (as they are an audio device)
Now after updating to build 15254, the Bluetooth was pairing again, but after rebooting it again says "Couldn't connect" !!!
Please help me!!! Anyone got an idea how to fix this???
Note that the device doesn't have bootloader unlocked or enabled root access!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please donate to me, if you like my work and want just to support! I will be very happy! Here's the credit card number where to donate to: 4890494450664545. Thank you very much for your support![/SIZE]
Go to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\bthserv\start
Change the value To 2 and restart it
It works on my lumian 820
gmirz2005 said:
Please donate to me, if you like my work and want just to support! I will be very happy! Here's the credit card number where to donate to: 4890494450664545. Thank you very much for your support![/SIZE]
Click to expand...
Click to collapse
And...what is your work?
augustinionut said:
And...what is your work?
Click to expand...
Click to collapse
Check all the threads made by me and you will see...
Hi All!
I have a problem with my android radio - 8227L. I have found for now a movie on youtube because I don't have access to my car at the moment. I will upload video of photos later. I have put code 9191 in settings because I though it will do a hard reset and now I have everything in Chinese language.. Anyone knows what to do now ?
Hi, same problem After 9191 code inserted.My radio Alps8227l_demo even if I change language setting to Italian no result the language remain in Chinese.....even if Google try to check new language online no Hope to have a change.No activation code ore message requested at startup only a popup for wifi or 3G/4G activation.Somebody talks about a file license.dat to put somewhere....Maybe a firmware update can solve the problem?
I have resolved the problem of chinese message for activation and language with this file.I formatted a USB key in Fat32 and placed this file in the root of USB key, than i insert the usb device with radio off and than start car with usb inserted with a wifi connection to internet the radio activated itself and after a reboot no message and i can set my language again.
I used this file, but it said thats an invalid file .. how could tou find that?
I try to upload again
I found it in a Russian Forum, but i don't remember the link. Sorry!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
don`t work ;-(
Hello
I have had such a radio in Megane 2 for several days
https://pl.aliexpress.com/item/1005001736289617.html?spm=a2g0s.12269583.0.0.3db14f6ezJ6HlI
Everything works as it should, steering wheel control as well, Wifi from phone, GPS, BT, radio, etc., but only when English is set in the system.
When I choose the Polish language, the BT / phone application stops working, does not start, and after 2-3 attempts the message: application has been stopped>
However, you only need to switch the language to English (I even chose Czech for a trial and everything is OK) and it works fine, you don't even need to restart the radio.
On Polish forums I found a few posts about this problem, but the only solution I found was to change the language.
Attached * .zip video with the same problem.
up
robisto said:
up
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
robisto said:
View attachment 5158589
Click to expand...
Click to collapse
The seller Erisin sent me a link to the newer software, I installed the MCU and Android system and finally the device after setting the Polish language works properly. I have noticed improved translations in several applications.
LM ZQ PX5 2021.10 - Google Drive
drive.google.com
I have this issue too, can someone send me link to ROM?