Related
Hmm i use SMS receiving acknowledgement by standard.
Can i turn off the signaling for it?
I think just a popup is enough. I dont need a "beep beep" on my phone immediateley after sending a SMS to another.
Hello messia,
As the SMS notification is a simple SMS you recieve from the network when the recipient get your SMS, you have to deactivate the sounds for incoming SMS's.
You can controll all notifcations in the settings:
Start > Settings > Sounds & Notifications > Notifcations
(Start > Einstellungen > Sounds & Benachrichtigungen > Benachrichtigungen)
If you choose "Messaging: new SMS" (Messaging: neue SMS) , you can turn off the sound for incoming SMS messages.
The downside of this is that sound notification is disabled for all incoming SMSs, not only for the send notifcations.
Greetings,
BGK
thx but that is not the problem, the problem is that i want a sound for a new sms i get, but i don`t want a sound for a sms that someone receives from me.
A popup for this is sufficient
I remember turning OFF the notification of sent messages previously, i think the info is in the forum somewhere, but it turns it all off. Both sound and popup.
I think it was a registry hack too. Was a long time ago, im fighting wm2005 now so havent got time to check back how i did it sorry.
yes i know how to deactivate completely but i just want to deactivate the annoying sound
it`s impossible, isn`t it?
Yes, it is impossible. The SMS you receive from the network looks the same as an sms from one of your contacts to your phone. The device cannot distinguish one SMS from another, so you can only choose to switch of the sound for all sms-es. You can also choose to disable delivery notification entirely, but then you will only get a pop-up that the sms is send, not when it is received by the other party, since the network will not send you an sms to notify you of delivery.
However, even when I am writing this, I consider two issues:
1. There is some program floating around that enables blocking certain senders of sms. That means however that the sms will not reach your phone, so this is bascially the same result as with switching sms delivery notification off.
2. BUT! Darek, the creator of DKToday ( search for him on this forum with the term DKToday, or his name dkot) uses the SMS delivery for counting the number of sms send this month. Basically, he could not find a way to extract sent sms info from the system, so instead, he chose to count the returning delivery notification sms from the network as a measure of the no. of sms sent by you. So, in some way, he must be able to distinguish delivery notification sms from normal sms, as sent by your contacts. I recommend you to contact him and ask him how that is done, maybe he can tell you what the distinguishing feature is between normal incoming sms and network sms.
Edit: After re-reading your first post in this thread, I may have given you an answer to a problem you did not have. Do you want to cancel out the sound for the incoming network delivery notification sms, or the sound from the pop-up after sending the sms ( the system sound)? For the delivery sms, see my answer. For the system sound: I have no clue...
I have written to him. Maybe he can help
The clock of WM stop ring after 1 or 2 ring... can I set it continue to ring until I stop it please?
Up,
Is there a hack in the registry to change the repeate of the reminder/alarm please? The alarm default of WM is too poor, it ring 1 or 2 times and stop (the distance between 2 ring is also very long), it's impossible to wake up with that.
I don't understand why, to this version WM6, crosoft do not fix this problem and let WM user look for always an alternative software solution
Ya I don't know why WM has such a crappy alarm interface.
I'm finiding the ringer to lack mp3 support and also repeating the alarm.
I know about 3rd party programs SPBtime/Chronos, but I'm afraid its going to kill battery for something that WM should already have been doing.
ChiGGz said:
Ya I don't know why WM has such a crappy alarm interface.
I'm finiding the ringer to lack mp3 support and also repeating the alarm.
I know about 3rd party programs SPBtime/Chronos, but I'm afraid its going to kill battery for something that WM should already have been doing.
Click to expand...
Click to collapse
Me too, spb kill my battery... Hop MS fixe it in next version WM
How to Enable Repeat Play Audio Sound Notifications in Windows Mobile
How to Enable Repeat Play Audio Sound Notifications in Windows Mobile
=====================================================
In Windows Mobile Pocket PC smartphone device, user can configure and set sounds and notifications alert for various events and activities that happening on the device. The notification alerts can be playing a custom selected sound, ring tone or tune, display message on screen, flash keypad light, or vibrate.
And user can customize their favorite alert music audio and notification method for events such as incoming new e-mail messages, MMS messages, SMS text messages, missed call and voice mail the phone received. However, the notification alert for each event happens just once for one time. Supposedly, it’s possible to set the notification such as beeping and playing audio sound recurringly and repetitively until user acknowledge the e-mail, MMS, SMS or other events.
There is an option of “Repeat” for “Playing sound” in “Sounds & Notifications” control panel of Windows Mobile. However, the “Repeat” check box is always grayed out and disabled for most events, except few events such as Reminder. So user cannot select “Repeat” option in order to make notification alert recurring and repeat.
There is registry hack that able to enable the “Repeat” check box in “Sounds & Notifications” control panel. To perform the change on Windows Mobile registry, a registry editor such as PHM Registry Editor, Mobile Registry Editor or CeRegEditor is required.
In Registry Editor, navigate to the following registry key branch:
HKEY_CURRENT_USER\ControlPanel\Notifications
There is a lot of registry sub-key inside the Notifications folder. Search through one by one to find and locate a registry entry that has its Default (REG_SZ) value as the name of the event. For example, Messaging: New e-mail message, Messaging: New text message, Messaging: New MMS message, Phone: Missed call and etc.
Once found the correct registry sub-key that represents the event that you want to enable the “Repeat” option, edit the value data for Options value name. Change the value to 1073741835 (in Decimal base) or 4000000B (in Hexadecimal HEX base format). Save and exit from registry editor.
Now the Repeat check box is enabled, and user should be able to set repetitive and recurring event notifications.
The alerts appear to completely stop at 10 minutes.
For example a text message comes in, you get an alert
You get an alert every 30 seconds for 3 minutes
You get one alert at 5 minutes
You get one final alert at 10 minutes
Tweak and Configure How Notifications Work in Windows Mobile Notifications
Tweak and Configure How Notifications Work in Windows Mobile Notifications
=========================================================
Windows Mobile powered device (including WM5, WM6 and WM6.1) has a registry key that allows user to tweak, control, configure and customize how notifications work in the mobile Pocket PC (PPC) device. For example, whether a notification should shows or hides the icon in taskbar, play notification sound, pop up notification bubble for user to dismiss or vibrate.
One notification that can be configured via the said registry key is SMS sent notification, other than the SMSNoSentMsg registry key. Then Options registry entry, under HKEY_CURRENT_USER\ControlPanel\Notifications\Default registry branch, when changed to reflect user own preference, may affect other notification in Windows Mobile device too, especially those unable to configure via Sounds and Notifications control panel GUI.
To perform the registry hack to configure different settings for notifications in Windows Mobile, run any registry editor on Windows Mobile device (such as PHM Registry Editor) or remotely access mobile device registry with CeRegEditor from desktop PC, and then navigate to the following registry key:
HKEY_CURRENT_USER\ControlPanel\Notifications\Default\Options
Then, change the DWORD value to any of the following value, which also shows its corresponding results on notification respond, depending on user’s preference:
• 0 - Show icon
• 1 - Show icon and play notification sound
• 2 - Show icon and vibration
• 3 - Show icon and vibration and play notification sound
• 4 - Same as 0
• 5 - Same as 1
• 6 - Same as 3
• 7 - Same as 3
• 8 - Show icon and notification bubble
• 9 - Show icon and play notification sound and show notification bubble
• 10 - Show icon and notification bubble and vibration
• 11 - Show icon and play notification sound and show notification bubble and vibration
• 13 - Same as 1
The change takes effect effectively.
I've got an annoying problem that I can't seem to fix....there is no option in Notifications to change how sent sms notifications arrive - so it vibrates and chimes every time. I need to keep the notifications themselves on, just without the audible notification!
Also, there is an option to set this for MMS messages which seems odd...
Any help would be appreciated. Cheers.
Dude- Im sure you have checked the settings in START>Settings>Sounds&Notifications right
Yeah. There is no option to change the notification for sms delivery reports though.
That's strange. it should be on the Notifications Tab in Sounds and Notifications. On the drop down list it should say "Messaging: New text message" you don't have that?
It's 'Messaging: New SMS Report' that I need and seems to be missing.
I have the same problem. I receive a LOT of SMS messages daily (100 and counting just today) and its horrible to get the same sound every 5 minutes!
I seem to have found the solution right here
http://www.saman-cz.com/ppc/index.html?drfovrw.html
Haven't installed it yet
Musicman - that settings is for incoming texts, on which you can set all the various options. 'Messaging: New text message'
Ubermark means that every time he sents a txt, you recieve a 'message sent' notification with sound.
What we are missing is a like for like setting for texts on 'Messaging: Sending MMS' - this would allow us to remove sound and/or notifications for text's sent.
Anyone any ideas?
Reg Edit to fix:
- HKLM\SOFTWARE\Microsoft\Inbox
- create a new key "Settings"
- create a new string value "SMSNoSentMsg" and set the value to 1
do a search fro schap's tools and you can disable it from there
monkeygadge said:
Reg Edit to fix:
- HKLM\SOFTWARE\Microsoft\Inbox
- create a new key "Settings"
- create a new string value "SMSNoSentMsg" and set the value to 1
Click to expand...
Click to collapse
Its actually - HKLM\Software\Microsoft\Inbox\Settings\SMSNOSentMsg=DWORD:1
Hi all,
I can't seem to change the settings for the notification of SMS and e-mail messages. Both seem to make the device come out of standby, play the notification sound, and show the blinking green light. It's annoying, and I can't seem to be able to change it (even with the TD2 tools).
Any one with the same issues?
Thanks
Have you turned off notifications for SMS in Sound Settings? Also, there's a cab floating around called SMS tools or something that may have this tweak.
or
Use a regsitry editor and go to the key:
HKLM\Drivers\BuiltIn\RIL
Set DisableSMSWakeUpEvent to 1
If the entry does not exist, you will have to create it.
My Leo does not produce any notification (sound, message. vibrate) at all (SMS, Email, etc.).
I did check the Sense settings (in Sound & Display) and the WM Notifications settings, all seems to be well defined but still nothing.
I did a Hard Reset and restored all my programs & data. It did not help either.
Please advice
zolom said:
My Leo does not produce any notification (sound, message. vibrate) at all (SMS, Email, etc.).
I did check the Sense settings (in Sound & Display) and the WM Notifications settings, all seems to be well defined but still nothing.
I did a Hard Reset and restored all my programs & data. It did not help either.
Please advice
Click to expand...
Click to collapse
You mean this ?
Enable LED Notification Setting in Sound and Notifications
If you want your LED to flash when you have a new message, missed call or voicemail.. well you can't as it is greyed out. However the following registry entries can be modified to enable them or use the cab at end of post. Reset after changes.
New Message:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65B-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
Missed Call:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D660-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
Voice Mail:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D661-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
http://forum.xda-developers.com/attachment.php?attachmentid=247787&d=1258482547
Thanks
The Led seems to work, even though it is not activated in Sense Settings. What I miss are the sound indications defined for these events.
Is the CAB you had sent just forthe Led or also for the proper behaivior of the notifications?
zolom said:
Thanks
The Led seems to work, even though it is not activated in Sense Settings. What I miss are the sound indications defined for these events.
Is the CAB you had sent just forthe Led or also for the proper behaivior of the notifications?
Click to expand...
Click to collapse
LED but I change the notification thing from settings .. Like start>settings>all settings> etc..
Its workin fine here.
Problem solved
I did change the SENSE language registry value to the required value and all sound/message notifications had returned .
Set: HKEY Current User => MUI => CurLang. Change the hexadecimal value from the existing one to 0409 (en-us) - in my case I use English US.
See language codes here. Thanks to RRibiero.
Before doing all that, you have to check if all the relevant languge files with the language codes are stored in the device Windows directory (i.e. the language code is emmbeded in those files' names - some 47 files).