Related
Hi there,
Don't know if this is even possible I've read all the articles I could find here and tried Microsoft web pages. If you can help ill most appreciate it.
(Apologies if this has been answered please let me know the link...)
My internet connection (at home) is via NTL cable, My 4 pc's connect to the internet via a Linksys router, each PC has a private IP address along the 192.168.1.x subnet which NAT to the router for internet access - all transparent.
I do not have a proxy server at home, connection is established because each PC uses the router as a gateway for internet access.
My XDA2 refuses to talk to the internet via Activesync. I can confirm that my handheld connectiviy text bubble says that the internet connection is pointing to the PC connection. the paramaters in Active sync passthorugh are set to internet - But it just won't work.
I even tried configuring the proxy option to the routers address no avail.
The XDA wants to keep defaulting back to its GPRS connection.
At the moment I have disabled the phone completely to stop it dialing out whilst I am testing.
I'm out of ideas can anyone help !!!!!!!!
I managed to fix this problem. I set up a personal proxy server from
http://www.youngzsoft.net/ccproxy/ its an excellent proxy only 815k in size and its intelligent enough to understand NAT'd IP addresses etc for connections to routers.
All I had to do was to configure the XDA 2 work profile with the proxy server address then the internet passthrough worked fine.
For Bluetooth access (I use a D-link USB bluetooth adapter). I had a problem getting the XDA 2 to launch the bluetooth connection under the activesync. I used the excellent pocket bluetooth tools
http://216.239.39.104/translate_c?h...t+bluetooth+tools&hl=en&lr=&ie=UTF-8&oe=UTF-8,
after installing this the connection worked straight away with BT internet access as well.
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Hi I am new to this forum, and like the person above am trying to find a way to browse files on my PC through my XDA2 (i-mate).
I am connected via bluetooth to my PC, activesync is working fine this way, as is internet browsing on my XDA2 using my PC's internet connection.
All I wan't to do is be able to sit away from my PC and get files from it to the XDA2 via bluetooth.
Apparently using Resco File Explorer and a wi-fi connection you can set up a network with your PC, but when I try this with Bluetooth it doesn't work - surely bluetooth can offer the same file sharing - just slower???
Please help us if you know a way!
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
essojay said:
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Click to expand...
Click to collapse
sorted!!!
BR
i have just bought a netgear wifi router and i can not get it to work. does anyone know of a guide to set it up?
RE
Hi!
Netgear haa a very good forum for its products. You can try there for better luck
i found it no help!
getting there now. well i can acess my computer via resco file explorer.
just now need to set the internet up
2 questions,
Do you need to set up the router ? Or do you need to set up your ppc ?
prob both,
i can browse my desktop pc wirelessly using resco file explorer but i can not use the internet.
so it still could be both, i still can not connect to activesync, probably if i can do this i would be able to connect to the net as i can when the blue angle is docked
robboy said:
prob both,
i can browse my desktop pc wirelessly using resco file explorer but i can not use the internet.
so it still could be both, i still can not connect to activesync, probably if i can do this i would be able to connect to the net as i can when the blue angle is docked
Click to expand...
Click to collapse
You might want to down load vxUtil from http://www.cam.com/vxutil_pers.html with this util you can most likely find out what is wrong. You should not need activesync to connect to the Internet, **IF** your router connects to the Internet.
To activesync with the PC you will need to enable NetBIOS over TCP/IP on the PC. Then you'll need to be able to PING your PC by name. And both the PC and the PPC need to be using the same DHCP server, and in the same network.
As you can reach your desktop, have you set both settings to "Work" or some form of this on your PPC, and checked just "This network connects to the Internet" under proxxy settings for the work connection? Each version of the PPC OS seems to change the names here just a bit.
Guys i have searched over 1 hour in the Internet but no solution sorry but still i cant get connected.
If someone please Post Step by step procedures i would be very thankful
here is some useful but not completed websites:
The Best one seems to be this but it is very old:
http://www.microsoft.com/windowsxp/using/networking/expert/bowman_september24.mspx
Result from other Sites:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
http://www.modaco.com/index.php?showtopic=237804
Drop it. No way to do it. I've posted here just a few weeks ago, tried everything, with no luck. It simply isn't possible with the latest ActiveSync 4.1, and the older one 3.8 which has the wifi functionality, is not compatible with WM 5.0.
So forget about it. You can connect through wifi, but no synching...
Thank you very much but what is the benefith to connect through wifi?? i cant even send a file or connect to internet!!! At list give me a clue to conect Internet through WiFi & PC. but i think if we do the right Setting for IP in WiFi we would get connected some how....
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
krale said:
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
Click to expand...
Click to collapse
Resco File Explorer will let you add "share drives" also. You can add directories or drives.
Upss...
It seems that sharing internet connection through wifi is NOT possible with WM5... They have just ruined everything with this stupid upgrade of activesync!
Anyone aware of a work arround so my PC internet connection works on my PPC connected to it with ad-hoc wifi?
as i said i think with IP configuration there might be a way to share it. or i think XDA fellow should program a Stack for this issue on activesyns4.x
Internet over Wi-Fi
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Perhaps you are right Acer, since I was not able to fully test it with your specs.
I have a company cable network LAN, and a wireless adapter on the laptop which is free. But unfortunatelly, I was not able to set up internet sharing of the LAN, since it goes over a Network Bridge. Anyone now how this could be enabled?
THanks for the info Acer, its helpful...
Re: Internet over Wi-Fi
acer175 said:
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Click to expand...
Click to collapse
Dude thanx i have a laptop and i have made an ad-hoc network between my pc and the Prophet, also i have shared my dialup connection but it is not working, if possible would you please explain step by step settings?
do you have Windows XP on your laptop?
acer175 said:
do you have Windows XP on your laptop?
Click to expand...
Click to collapse
yes i am using XP home Edition and my laptop is Averatec 3200 series
Just go to properties on your dial up internet sharing and set share this connection. i thinks thats about it. i've not use it for a long time, but if I remember correctly that's about it. you have to share it with your WI-FI adapter of course.
Some WI-Fi card can configure this automacticly. Like several I seen. You can set it as a router, and you're good to go.
BUMP @ acer175 ..where are you dude??!!!
Hi lover. Sorry, I thought Munyuk81's response was enough.
Anyway, on Windows XP, open Network Connections, right-click on your dial-up/ADSL connection, selet Properties.
Open the Advanced tab, you should have an Internet Connection SHaring section. Enable "Allow other users to connect etc, etc...". Select the wireless network adapter if given the option. Click YES if asked to change the IP.
Next create a wi-fi network using the XP utlities or your card's utilities. Don't touch the IP address of the wi-fi card.
Next on your Prophet, enable Wi-Fi and it should discover the network by itself. If you set a key in the step above, it will ask you to enter it.
@acer175
Do you know how i can share my Lan internet which goes over a Network Bridge? WHen I removed the Lan from the Network Bridge, I could see the options for ICS, but there was no internet to share, as the connection was lost. Adding it back to the network bridge restores the internet connection, but removes the option for sharing it with the other (wifi) card...
Anyone?
i haven't tried it myself, but thinking logically, when you add a connection to a bridge, it loses its individual attributes. You have to check the properties of the bridge, and check if there are ICS options there, however I do not think that XP allows that, but you can try.
ALso see if this may be helpful:
http://www.practicallynetworked.com/sharing/xp_ics/
thanx acer175.
i have connected my PPC to PC but still no internet sharing!! also i have shared some drives and folders in my PC but with resco explorer i cant see any of them
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
acer175 said:
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
Click to expand...
Click to collapse
the file sharing works perfectly (thank you\) but no internet conection when i start IE browser it says : The page cannot be found. check the name and try again ?!!!
what is your settings in
Start.Settings.Connections.ConnectionsAdvanced...Select Networks?
both of them are My Work Network
Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.
Great! Many thanks! ;-)
whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?
I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.
Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!
Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.
Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...
The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.
Thanks man!
Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(
levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
Hi,
This might be a silly question, but I was just wondering if it is possible to use the internet connection on a PC if the hermes was connected to it via USB?
I dont have wifi and my PC connects directly to the internet, is there anyway the Hermes can access this connection?
J'
Right now I am using my ATT8525 as my modem.
It took me a long time to get it but I'm still not sure how I excatly what settings I did.
One thing is ""Internet Sharing"
Find that and setup for USB and then connect. Your computer might see the connection and go from there.
Wish I could help more...
It should work automatically when your Tytn is connected via ActiveSync and your desktop computer has internet. No further configuration should be necessary on default. Just open the Tytn's IE and try it out ...
Oh my bad... I got the question backwards