Database Users

[REQ] HTC touch apps

i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??

how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...

yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly

bump ...

All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?

well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot

mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap

The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.

u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...

i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!

htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?

killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.

bump? ...

bump ??

come on ppl, i am sure that someone has gotten touchflo to work

HTC HOME CUSTOMIZER CANNOT REMOVE TABS [cingular 8525]

Hi guys, I'm using cingular8525 and HTC HOME,also I installed HTC Home customizer ver 1.0b5.
everything about the customizer seems to be working fine, except when I try to removed the tabs from 6 to 4, (only leave with home,contact,profile,and launcher). I dont need weather and the music player.
but after save and exit, nothing happends, still 6 tabs, please help?
also is there anyway to change the music player point to TCPMP instead of WMP?
Thanks!

what version of HOME are you running? the customizer doesnt fully support the latest HOME version.

hmmm, i dont know, where can i check? I just went to remove prograns, it shows the app name is Helmi HTC for WM5.

In regards to changing the music program, so far as I know is not possible. For a while I did some registry searching and couldn't find a way to do it. But, please let me know if you do find a way.

How to switch to Diamond clock in Cruise ?

Hi all,
I want to switch from the original clock that are default in Today screen in Cruise to something that looks like the Diamond clock.
That is all I want to do, i don´t want to change the entire interface only the clock.
Is it possible and how do i do it ???
Thank you guys, you ROCK !!!
//Peter
Ps,
Why do i want to do it?.. Simply because I'm getting tired of seeing that same old clock, day in and day out.

the clock is made of images stored in windows directory or in htc home dir.
You can search for diamond style htc home packs, open the files and copy into your pda only the files corresponding to the digits.

Thank you for the quick response.
However, I'm kind of a noob and would very much like to get some solid advice on to what to copy and to where and what to delete and so on...
Othervise I will **** things up and be stranded with a screwed up home screen
Cheers,
//Peter

HTC Home Customizer
is the name of the game
http://www.pocketemu.com/download4.html
(for free)
then you need a diamond clock skin such as LPASO's (look for in this forum).
I did it myself - it works very nice.

cool, thx
I will try it out, this was exactly what I was hoping for
edit:
Sorry to bother you guys with this but i only find a cab for the entire diamond theme.
http://forum.xda-developers.com/showthread.php?t=404415&highlight=LPASO
Can anyone point me where to find only the diamond clock skin ?
again thank you,
//arcspin

Get it here:
http://forum.xda-developers.com/showthread.php?t=393451
and remember, you need HHC v1.0.

As much I like the software HHC it is huge just for me to switch the clock skin.
Is it possible to replace to original .png files for the standard clock to the .png files in the clock folder found in the "Diamond_HHC_Theme.zip" ?
That way I don't have to take up 4mb of memory just to switch clock skin.
First of all, is it this simple ?
Secondly, if it is that simple, what are the .png files named that are the standard clock skin and were do i find the on my TC?
Many Thanx,
//arcspin

If you find files need to change and give me place to change, I will make for you (cab) I create allready for dailer in diamond style only for original wm.6.0 rom you can check my 4shared.
this HTC Home Customizer not work for me
I am also looking how to my original HTC Home plugin make with more buttons still only 4, and look close to diamond
Still With Original Rom....

Once you have setup your clock & the rest (icons etc.) in HHC, you can get rid of the program and all its files (ie, uninstall & delete directories) and still keep the custom cofiguration of HTC HOME, which is saved as a set of files in \windows folder.
That way you can save that 4MB+ of memory, and still keep the diamond clock, but you cannot customize HTC home any longer.

YES!
Luckily and to save you doing a search (please search forums first it wil save you getting ripped) i have attached below.
Unzip them and copy to your HTC home file on your device. Copy and paste in the correct place and it will replace the files only to do with the clock and nothing else.
Please make sure you do a backup of the HTC folder on ur device before copying new ones, just incase you f#@k things up!!!
I always copy folders or files to a TEMP folder on my sd card, if you play alot and you make a mistake (and you will) then you have a life line!!
Also HHC customiser does not work with original HTC plugin, you have to unistal and use HHC one, which is kool, but may invalidate your warranty. For a noob i would just use the clock face files for now.
Have Fun!

Thanx Timmy and you all for this nice info.
Yes, of course one should do a search, my bad.
It was also my bad that I didn't quite understand if it was just to replace some .png files or if I had to do something else as well.
Now, that you have explained it to me it looks like a simple operation for sure.
Thank you and I will back up my files....god advice *smile*
cheers,
/arcspin

cab from file on first page except wallpaper
http://rapidshare.com/files/135827060/Diamond_HTC_Home.cab.html
Just tell me have place to copy this (diamond wallpaper) and it's apply automatically after restart ?????????

JAYmasta said:
cab from file on first page except wallpaper
http://rapidshare.com/files/135827060/Diamond_HTC_Home.cab.html
Just tell me have place to copy this (diamond wallpaper) and it's apply automatically after restart ?????????
Click to expand...
Click to collapse
Jay,
If you want to customise HTC home fully, ie with 6 tabs and change the icons etc use HTC customiser, search for it here.
If full customisation is not important but want fully functional 6 tab, use the cab file attached which i got from a wm6.1 Rom on here.
Hope i understood you properly ;-)

I want start-settings-today-items- and push (htc home) and I lkie (options) button become active (and choose how many tabs i like)
this cab can help me ???
i use original rom with 4 buttons

Jay,
You cannot customise the default HTC home which comes on the Touch Cruise.
If you want options for how many tabs you want you will have to unistall HTC Home on settings/remove programs. then do soft reset.
You can then try HHC customiser (do a search for link) or try the cab file i posted. This will install a cooked version of HTC home which you can then choose number of tabs and the order.
The good news is , if you dont like any of the "cooked" versions you can do a hard reset and u then have original one back again.
What ever you do, do a full backup using sprite software that came with the phone before you do anything!

My friend can you post this sprite becouse I don't have? I saw on www.htc.com downloading for diamond but I can't take (other serial)

No can do bro, it came with the device on a cd. If you dont have the disk google it and purchase the lite edition, it does what u need and is pretty cheap 20$??
Its a good backup and has got me out the ****e when playing around.

This cab which you gave almost good but music tab start windows media player and not active buttons after in home plugin
maybe I have I never chek cd

[TWEAK] Control WMP/MortPlayer/TCPMP/FM Radio/TF3D Music using wired headset

This tweak, consisting of 2 small apps, allows you to use the button of earphones shipped with Diamond to play/pause music and skip to next track. Just install the CAB. If you won't like it, it is uninstallable.
Apps supported: MortPlayer, WMP, TCPMP, FM Radio, TouchFLO 3D Music tab (both in v1 and v2)
You do not have to specify which app to control. The running one is controlled.
Also, be careful and lock your screen and allow your device to suspend after some time. When you press the button the PPC wakes up. I can't suspend it without stopping music, with the exception of FM Radio, so make sure accidental presses won't do anything (lock) and that device will susped itself after some time.
NOTE: Voice Command is not usable after this. Also some BT headset buttons may play/pause or switch tracks.
Everything is at your risk. If you like it or have problems with it, please reply!

Thanks a lot ^-^

something similar but to control coreplayer would be very niceee

Works with FM Radio and TCPMP now.

thank you very much! really been waiting for app like this
when installed i had hf plugged and it started to work after unplugged once. before that pressing hf button did nothing..
seems to work well

Has anyone checked whether this app can work with manila 2D's audio manager?
.. will give this a try later today.. on my m2D running on htc touch 3g
EDIT: bummer, does not support m2d's audio manager tab...
kosherpig, any chance you can add support for m2d too?

bluetooth headset
kosherpig this a great app and works perfectly on my diamond with the wired headset. It does interfere though when I'm trying to voicedial using a bluetooth headset (it starts music player and changes to next song). Any way that you can disable your app when the bluetooth link is active?

Rocket29 said:
kosherpig this a great app and works perfectly on my diamond with the wired headset. It does interfere though when I'm trying to voicedial using a bluetooth headset (it starts music player and changes to next song). Any way that you can disable your app when the bluetooth link is active?
Click to expand...
Click to collapse
Unfortunately it is not possible. If you need voice command, you can delete the file \windows\sddialer.exe .
After that, voice dial will work but you won't be able to start/stop with wired headset. It's a flaw of method used by me.
venger0 said:
Has anyone checked whether this app can work with manila 2D's audio manager?
.. will give this a try later today.. on my m2D running on htc touch 3g
EDIT: bummer, does not support m2d's audio manager tab...
kosherpig, any chance you can add support for m2d too?
Click to expand...
Click to collapse
I think I may try, but I doubt Diamond is a M2D-capable device, so I need your help. Does manila2d switch tabs at least? Or, it looks like the program actually does anything, ie. scrolls the view?

please try to make this wonderful app work with coreplayer!!!

christiano88 said:
something similar but to control coreplayer would be very niceee
Click to expand...
Click to collapse
christiano88 said:
please try to make this wonderful app work with coreplayer!!!
Click to expand...
Click to collapse
Searching would be very nice too:
http://forum.xda-developers.com/showthread.php?t=498349
Real nice work, this one though, it's even better cause works with the three programs at the same time!

Hi kosherpig,
yes - happy to help you on the M2d testing front.. Manila 2D from what i understand, has a similar user experience to M3D - minus some visual effects.
The default music player is also called the Audio Manager. And on M2D, users can access it from the Music Tab (like M3D).
I don't have any knowledge of the API for the audio manager, but if a forum M2D expert can help with the API, I will be happy to test your code.

cel15 said:
Searching would be very nice too:
http://forum.xda-developers.com/showthread.php?t=498349
Real nice work, this one though, it's even better cause works with the three programs at the same time!
Click to expand...
Click to collapse
PlayPause doesn't work on my touch diamond correctly, it just lights up the screen when double clicking/long click headset button even and it is configured for coreplayer in settings.

christiano88 said:
PlayPause doesn't work on my touch diamond correctly, it just lights up the screen when double clicking/long click headset button even and it is configured for coreplayer in settings.
Click to expand...
Click to collapse
???? Here works fine with Coreplayer 1.3.2...but this thread isn't about that anyway. If you wanna solve it, let's talk on the APP thread. Sorry for being harsh on the first post then.

Compatible with s2u2?
looks like the switching off of the screen when you have s2u2 installed is preventing any skip to the next song and really delaying the pause/unpause (20sec).
Have you tried it?
Is there a setup of s2u2 that could solve this (through s2p maybe)?
Aside of that it is a great feature, I always thought that the implementation of the headset button was dumb!

Thankssss!
What a wonderful program. I was looking for something like for a longgggg time

I want to ask whether there has a AVRCP plugin to make TCPMP controllable by Bluetooth Headset or not?

venger0 said:
Hi kosherpig,
yes - happy to help you on the M2d testing front.. Manila 2D from what i understand, has a similar user experience to M3D - minus some visual effects.
The default music player is also called the Audio Manager. And on M2D, users can access it from the Music Tab (like M3D).
I don't have any knowledge of the API for the audio manager, but if a forum M2D expert can help with the API, I will be happy to test your code.
Click to expand...
Click to collapse
Okay. So I made a experimental version for M2D.
To make it work:
- make sure that, at main screen, the menu Start is named exactly Start.
- make sure you are at "Music" tab. Currently I am not able to switch through M2D tabs.
Note: if you are using TouchFLO 3D aka Manila aka Manila 3D, use the CAB from the first post.

thank you
tf3d one works perfectly, thank you very much.

Am I the only on that uses Windows Media P for music?
Please some controls for WMP
Controls for Titanium music playing would be insane!
Greets to all.

alexandrepr said:
looks like the switching off of the screen when you have s2u2 installed is preventing any skip to the next song and really delaying the pause/unpause (20sec).
Have you tried it?
Is there a setup of s2u2 that could solve this (through s2p maybe)?
Aside of that it is a great feature, I always thought that the implementation of the headset button was dumb!
Click to expand...
Click to collapse
I confirm your test. With S2U2 enabledskip and play/pause functions are inibithed.
Any solution?

[APP]SE XPERIA X2 Panel Manager and Panels [WVGA][ONLINE]

Hi, this is my compilation for the X2 PM and its Panels for our WVGA devices.
Installation:
- Download the file, install following the numbering on the folder, inside you will also find a pre-selection of Panels to install onto your device.
- Reset when asked.
Note: If you have X1 Panels installed you must kill this process, i use FDC Taskmanager.
DOWNLOAD​

Thanks man! Will try this tonight after work...

Thx, i'll give it a try once I get back home.

Ty
just try it some pb :
ms today : not launch back to home
pixelcitynight and growing panel: error unable to create player
facebook panel has not the right "thumbimage" it s on-the-road but it seems to be working

I have just kept it for download.. Well its sooo awesome to look at it..

thorfr said:
Ty
just try it some pb :
ms today : not launch back to home
pixelcitynight and growing panel: error unable to create player
facebook panel has not the right "thumbimage" it s on-the-road but it seems to be working
Click to expand...
Click to collapse
Sorry i forgot to tell you, this was successfully tested on my Rhodium_AF rom, on others, i honestly don´t know how it´ll behave, it should work.
Cheers.

I am on Topaz and Rom Dutty HG6 so i don t thing problems link from my config
But we will see with other person

Everything works great, even solved the issue I was having on the tilewave panel. Thanks for this!

what panel do i install to get the first screenshot in the 1st post?

Congrats!
ark666 said:
Hi, this is my compilation for the X2 PM and its Panels for our WVGA devices.
Installation:
- Download the file, install following the numbering on the folder, inside you will also find a pre-selection of Panels to install onto your device.
- Reset when asked.
Note: If you have X1 Panels installed you must kill this process, i use FDC Taskmanager.
DOWNLOAD​
Click to expand...
Click to collapse
Great work!
Many thanks

Thank you !
I never used Sony's Panels before. It is cool, I really like the Facebook panel. Too bad there is some problems with text input

still stuck
i followed the directions and i got a panels icon which does nothin when i click on it...
i am using the htc stock 6.5 rom

i got everything working but pixel city and growing panel, are they supposed to work?? When i click on them it gives me an error about a player. also, how do you remove a favorite from the main manager screen? i have a blank spot where the nonfunctioning growing panel used to be and i can't seem to get rid of it....
thanks for this!

is this like a replacement for sense ui?

Workable on other devices?
May i know would this home plugin work for Omnia II wm6.5 stock rom or it will face the problem of permission? Thank You.

ark,
Its work great on my TP2 WM6.5 B23504 , great work.
- Like the facebook app very match, to me it much better than the m$ one, cool.
- RSS reader shows rss on screen, really nice.
Improvement:
- Screen abit out may be is because of the new WM interface which has "Start" button at below, or may be couse by "manilaFixPosition".

i installed it on a tg01 with wm6.5 german but it didn't work
when i watch at taskmanager i can see panelmanager.exe and panel process
can someone help

Hamido123 said:
i installed it on a tg01 with wm6.5 german but it didn't work
when i watch at taskmanager i can see panelmanager.exe and panel process
can someone help
Click to expand...
Click to collapse
Maybe you should create a programs file folder, and copy PM stuf to it.

I may give this a try. Before I do, does anyone know if this uninstalls fully and without problems if you want to get rid of it?
Also, will anyone bother making panels that work on the TP2 for this?

I tried to install the app, however i still get the error message, it says about permission or you have component missing. I have installed it in order, and then the panels.
May i know how to solve this permission problem.Thanks