How can i HAve my ringtones sound loud? - Wing, P4350 General

It seems that my old dash was way louder than the wing. When someone calls its a lil low. Is there a way to make the higher in the registry or something

i was wondering the same thing. My brother's dash does seem like it rings way louder than my wing.

I don't remember the setting, but there's a registry key you can change to increase the volume. Do a forum search.

Related

Any way to make the speaker louder?

Hey All,
Is there any way to make the speaker louder? This is for general music playing, as well as speakerphone etc. On the XDA2 you could turn it up to the point it distorted...but the i-mate etc dont seem to go that high.
is there any 3rd party program to boost the speaker volume (i know it wont go that much higher without distortion, but the option would be nice).
Cheers,
Jez.
me too
This is the only thing, in my opinion, that is not perfect about htis device. I wish the speaker was a little louder for speaker phone. Also, it would be great if someon could figure out how to make speaker phone kick in automatically when you use voice dial.
Re: me too
asymtrax said:
This is the only thing, in my opinion, that is not perfect about htis device. I wish the speaker was a little louder for speaker phone. Also, it would be great if someon could figure out how to make speaker phone kick in automatically when you use voice dial.
Click to expand...
Click to collapse
There is a way with regedit, I'm still looking
im also interested in turning up the volume..
Make the holes a little bit bigger. The sound is muffled by the tiny hole.
@ZZPACKED: keep us informed. Im interested too.
Thanks
double post
Hello,
The speaker is small and can hold only a minimum dbs of sound. If it becomes more louder, you get the sound distorted and may spoil the speaker's cones too. But for low volume sounds, you may try boosting!
Hi Carty, how do you boost the sound?
Cheers
hi
hello everybody ! i`m also finding a way to increase sound of speaker, & in call how it was on mpx200 used to
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\InCall]
"InitVol"=dword:00000005
you can try, may be it seems to me ?! but a little better

Speaker Volume, how can I turn this up?

Hey guys, i've been doing a couple searches but it doesn't seem like I've been able to find the answer I was looking for. How can I turn up the phones earpiece volume? (ie. the speaker at the top of the phone in between the blinking lights for incoming/outgoing calls).
I tried editing everything outlined in this thread:
http://forum.xda-developers.com/viewtopic.php?t=41273&postdays=0&postorder=asc&start=0
without any luck other than getting my ringtones and media volumes to play louder.
I also found another thread here:
http://forum.xda-developers.com/viewtopic.php?t=42246&highlight=sound+vol - that asks the same questions without any results.
Can this be done? I hope so because during calls the volume is just too low for my tastes, even with the slider up to the highest setting.
Thanks.
Same problem here
Same here the volume on this thing is terrible. Speaker phone is useless as well. I used to use a program on my treo called volume care wish there was something like this for the MDA, the only way i can hear it at all in the car is with my bluetooth and everything turned up to max.
there has to be some sort of fix for this.

Low Phone headset volume

I would like to know if there is a way to hack the registry to increase / boost the phone headset volume. Please note I am not talking about the "speakerphone" volume, I just find that when talking to someone on the phone headset it seems alot softer than the Wizard that I had before, even when the volume is set to max.
i would also like to know how to do this. i feel like my wizards ear piece volume was deafening.. but on the tytn its so incredibly low
I don't have a problem with the headset, but even on the highest volume setting the phone's earpiece speaker is a bit too quiet.
Any thoughts anyone?
Thanks.
Same hear, just to darn low at the highest volume setting. I see there are fixes for other HTC phones but nothing specific for this phone. Has anyone on this board managed to hack the registry and find an effective fix to increase the earpiece volume?
i'd love this as well - just bought one of these :
http://www.expansys.com/product.asp?code=138247
and the volume level is VERY disappointing. my wizard used to have an acceptable volume level but i can't imagine being able to hear music on my tytn with traffic around. :-(

Adjust volume to 1-19%?

I've seen a lot of posts about volume being too quiet, but none about being too loud. I have a Jabra wired in-ear stereo headset, and putting the system volume to it's lowest, non-muted, setting of 20% while turning down the volume of Slide2Play to it's lowest, it is still too loud. It's not too loud to listen to, I just mean I want to be able to make it barely audible if I have to, for instance if a co-worker says something I don't want to be forced to take the headset off.
Is there any way to adjust the volume to somewhere in the 1-19% range rather than 20% being the lowest?
The headset is pretty comfortable, so I'd hate to have to buy an out-of-ear model which I imagine would be less loud at the lowest setting.
Mind you, I don't want to lower the overall volume. I like that it can be loud too, I just need it to be a little more quiet when I'm in the zone trying to bend a piece of code or SQL statement to my will so I don't miss what people say around me.. hehe.
just open ur headset and put a higher value resistor in it.
hope u understand my words.
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
hv u tried the SRS WOW HD? it has a tab to adjust the input and output gain it decreases the volume level.
sschrupp said:
Thanks for the advice but I'm not much of an electrician.
I'm more looking for a program, cab or registry tweak that allows for greater control of the volume rather than the simple Mute, Quiet, Medium, Loud, Louder, Very Loud settings that our BAs come with.
I found a cab that allows you to adjust the bass and treble which was very handy, but I can't seem to find one that allows more refined volume levels all around.
Click to expand...
Click to collapse
Hmm, that SRS WOW HD does help. Although it seems to like to completely mute my device if I unplug my headphones, or plug them in. It kind of seems like I need to reset the device after I plug or unplug my headset.
Kind of annoying, but music does sound better and I can make it more quiet. Thanks for the suggestion.
Anyone know how to keep it from disabling sound on my device when I plug/unplug my headset?

External speaker increase low volume

Anyway to make the external speaker volume louder through a hack or app? Its way to low making it it useless for car navigation but more importantly I can't hear it ringing when I have it in my pocket.
After we manage to run custom roms from NAND, you can use DSPManager, but in the meantime, you can hack your AudioPara.CSV is you know how to.
zen123 said:
Anyway to make the external speaker volume louder through a hack or app? Its way to low making it it useless for car navigation but more importantly I can't hear it ringing when I have it in my pocket.
Click to expand...
Click to collapse
they could probably increase it with a firmware update not 100% sure
as for ring volume as a work around just open an audio editing program like audacity and increase the volume of an mp3 that you plan to use as a ringtone then copy it to the device and use that it should be louder cause you have increased the volume of the mp3
its nto a fix for everything but its a work around for the ringer at least
adwinp said:
After we manage to run custom roms from NAND, you can use DSPManager, but in the meantime, you can hack your AudioPara.CSV is you know how to.
Click to expand...
Click to collapse
AudioPara.CSV is a windows mobile file. This in an android device. Your instructions are useless.
I am also looking to increase audio volume. Mine is quite low, I cant even use speakerphone properly. You cant hear the person.
I also own the samsung galaxy and the desire hd is about half the volume, if that.
I can hardly hear anyone on this phone and the music/podcast playback is ridiculously low. Did anyone in HTC actually use this phone before manufacturing it?
Their donkeys did...
I dont find it that low.
Was about to set a alarm signal and it was too low to hear.
But instead I choose to use a file from the music folder and
it was much louder.
Seamed strange, but the volume is OK!

Categories

Resources