Hi all,
I tried to update my o2xda exec Via Bluetooth(Which I am not supposed to do). The update failed. I did a hard reset. But nothing worked. Can any one help me atleast to go back to my old version of ROM
The PDA shows a blank screen
I downloaded the update from o2 site
Any HELP,,,,,,,,,,,,,,,,,,,,,,,,,,,pls
Could you provide the link to the download page of the O2 update?
Related
Hi new user and abuser already!
I've just purchased a XDAII which I was told would log onto inetnet from today. Nothing happened so I've tried to download upgrade from O2 website. Halfway through upgrade(which wasn't probably required) it crashed. Now it wont do anything. It won't even switch on. When I try to download upgrade on website now it says something about ROM from vendor! HELP what do I do or have I completely ****ed it up!
Cheers
Message
This is the message I get when trying to upgrade;
ERROR 100 Model ID ERROR
The Rom image you are trying to use is not designed to work with your pocket PC. Please check the vendor website and download the correct Rom update.
following this guide should make you avoid getting that error
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
SERIAL v1.06
Dont understand what its saying! Is there a simpler way? O2 say if it doesn't reset after Hard reset I need to send it back!
Hi Guys,
Over the last 4 days I have been reading the posts and trying all sorts of possibilites to fix my Mini O2...
I did the stupidity of upgrading it without a back up. I bought a german O2. I live in Germany, but guess what I don't speak german. So, either I waited 10 years until I can, or updated it to english.
It all went wrong... nevertheless, I manage to download the qtek and used the no id software to upgrade it. it goes well, radio, ext rom, but when updating the rom - when it gets to half way, the program says there was a problem in upgrading the rom. Maybe some german configuration problem?
Can you guys guide me please? thanks a lot!!
I sorted it out.
Thanks for all those who took the time to look at it. Somehow mx Mini is crazy. What I did in the end was uploading each batch at time. Started with the Rom itself, thereafter the ext Rom and last the radio. I did that by extracting the whole package to a folder and removing/returing the parts I wanted at time. So now I have a full english version in my German O2.
Re flashing phone with wwe rom
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Re: Re flashing phone with wwe rom
leeeel said:
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Click to expand...
Click to collapse
Hello , I have a similar problem : I have a Qtek S100 from France but live in the USA . I tried to switch ROM with a WWE one (WWE_11200-172_11200.exe) and got a COUNTRY ERROR msg ; then I replaced the MaUpgrade by a MaUpgrade_noID one and now i am getting an "ERROR 150 : UTILITY ERROR" message ; dont really know what else to do and my phone is on boot mode ....
Could you please help...
Thanks in advance
Hello Guys,
Disaster. I tried updating to the new ROM from the O2 website and it fails with : "ERROR114....
Tried the version from this great forum and guess what? same error.....
HELP !!!!!!!!!!!!!!!!! :shock: :shock: :shock:
My XDAIIi was brill. Now its dead...
Try putting the 2i into bootloader mode by pressing the power button, action pad down and the reset button at the same time. The screen will say serial with a version number at the bottom. When you connect it to your computer this should change to USB. Then try running the update again.
If you are using the modified version I posted on this site then the install will fail. Just run the program MAUpgradeUT_noid.exe a second time without touching the 2i at all.
Hope all goes well.
Hi Pug,
Unfortunaely that has not work. see screen shots attached.
can anyone tell me what this damn error is pls...............
oh by the way the iMate PDA2 rom fails as well with the same error. !!
If both your devices are failing to upgrade the problem must lie with your computer somewhere.
Are you using firewalls like zonealarm which may be interfering with the update process. If so try disabling them.
I assume you are connecting using USB and not serial. Do so if for no other reason than it's faster.
Are you using Activesync 4? More stable for upgrading than 3.8 but lacks sync over LAN feature - not a great deal if you've never used it. You can find this on the wiki link top left of this page.
Try downloading the packages again. I've posted the radio rom here as thats the one you seem to be having immediate problems with. Download it and overwrite the one on my modified rom.
I'll post more if I think of anything as I'm suffering a hangover right now and can't think too much cos it hurts. :?
thnx pug,
really appreciate your help. yes iam running firewall (norton). I will try your modified radio and advise. fingers crossed. and thnx once again.
using activesynch 4 as well from this forum
Hi pug,
Sorry the radio did not work. renamed the radio and ran update and the update works for nk.nbf and ms.nbf files. without radio the phone does not work but proved that there is no problem with my pc or usb cradle etc. the problem is the radio.
my IMEI is 354962000270150.
the radio file from the Launch rom from O2 does not work, so either my IIi has a damaged component or something else that I am not aware of.
copied your radio file to the other iMate upgrade and it still fails with the same error 114 !!
Any other ideas or suggestions pls, its really depressing to loose the XDAIIi permanently.
Oh I forgot to mention that the IIi is also unlocked and the ExtROm is unlocked as well. Will this make a diffeence?
The fact that the 2i is unlocked won't make any difference. The EXTRom on the 2i can't be unlocked and always results in the storage being locked which will stop the phone being updated. Maybe not at the actual update stage but certainly further down the line after the hard reset.
Ok now I have have tried various things as posted in this forum in various sections. Still get the same error.
Originally about 3 months ago, I had to hard reset, then I used the Launch ROM from the O2 website. I still have that original exe but that also NOW fails. I am now running out of options.
Any other ideas?
It might be that because you have unlocked the Extended ROM that it causes this fault, either that or you device has an internal problem which you cannot fix.
Take it back to the shop they will replace it.
114 error
I got my XDA2i back from O2 after a warranty mainboard replacement and decided to upgrade with the new O2 rom..horrors.. I got the 114 error and repeated efforts failed to cure it. I then inatalled a/sync on another PC and ran the upgrade from there...
Bingo! it worked..always worth a try if things defy logic.
Probably an old firewall that didn't uninstall properly.
One thing though, does anybody know when my backup battery will kick in and charge.
It arrived back from O2 completely dead but even with the main battery full it doesn't want to take a charge yet??
Hitla
Just humour me and try the radio upgrade on another PC... That's how i got round my 114 error
To all the people who have advised me... thank you.
I have tried the upgrade on 2 other laptops I have, one with Activesync 4 and one with Activesync 3.8.
AND..... the same failure error.
I have now taken it back to O2 and they have taken it in for repair !!
Should rcv it back next week hopefully repaired or replaced !!
Will keep you guys posted.
Once again great forum and great posters with serious technical advice.
Well done keep it up.
Soory guys,
Have been away for the last few weeks, so unable to update you all.
Well O2 replaced my device. It has the new ROM but the old radio !!
I would like to thank all of you advised me.
Hi,
I just downloaded the O2 Rom-Upgrade.
To keep my 2020i in German I only did a Radio-Update from 1.02 (ran the installer and copied the files to a different directory together with the AllUgrade kindasomething.....)
The update worked, it always worked this way, but after the update the Radio showed up as 1.00.00 (MUST be 1.03, at least that is what o2 says....)
Any idea?
Thanks, Günter
P.S.: I should add that the phone works..
ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks
MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.
Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!
chears i'll give that one a go and see what happpens. fingers crossed
ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated
ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?
@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).
chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not
Hey, I tried the wm6 update and tried it, its prepared, the % came up then stopped and told me
The update utility cannot be used on your pda phone. please check your update utility.
Im using activesync 4.5 and my phone is uk t-mobile ameo.
There is now no software on my phone and i cannot use it?
please can someone help even to get it back to how it was?
thanks
matteus
i am not expertised on this matter but:
- did you unlock your device?
- have you tried other roms?
- did you hard reset manually it?
hey, no i didnt unlock it i realised that now. i want to reflash original rom (where can i get?) then unlock an update. i miss it already
hard reset manually will help, then you try to upgrade.
i done a hard reset many times. the 'press cennter key to reset' comes up, i push it an bak square 1. where can i get orig tmobile rom??
i'm pretty sure that the link to your rom has already been posted here several times, but i can only find the german tmob rom.
check some of the big threads about wm6 and unlocking