Does anyone else have this problem? I answer the call by pressing green handset button but the calling party and myself cannot hear each other for about 3 to 4 seconds....
I ahve ahd some callers who were about to give up just as we were evntualy able to talk. If this is a fault, then I need to get it looked at under warranty.
:?:
bakerk said:
I answer the call by pressing green handset button but the calling party and myself cannot hear each other for about 3 to 4 seconds....
Click to expand...
Click to collapse
Long shot, I know, but - do you have Towa's Bluetooth Tools installed? They can cause such behaviour.
Cheers
Daniel
I have the same issue, the work around is not to answer until the third ring!
The problem only occured for me after loading imates 1.72 rom on my XDAII
ta
Christian
I did have pocket bluetooth tools installed and have now uninstalled it.
I had it installed because it turns on bluetooth on an incoming call and is handy when using the Jabra 250.
However it follows that maybe the delay is causd by this very switching on of BT so I'll report back when it's had a good testing.
The ROM I am running is not the newest one quoted in the second reply and if this is a side effect of installing that rom then I will stay as I am...boy does that delay bug me
thnx all
:roll:
Ok all...problem solved...it was the bluetooth tolls that cause it...uninsatlled ans now no delay.
Thanks all for your help :lol:
I also experience delay, but i cannot uninstall pocket bloutooth tools because then my BT GPS won't work anymore
Is there a way to disable this headset functionality in pocket bluetooth tools because i don't need it, I only need com port for BT GPS... Is there any alternative solution for MDA-II ?
Tnx in advance,
Davor
Hi
Anyone found any software that offers reliable voice dialing? The MDA Pro comes with somet called "Voice Speed Dial" Its sh1te!
Has a habit of trashing the voice tags of its own accord, and often does not respond when I press button on bluetooth headset.
When the device is closed and off and you press the button on headset nothing happens (PPC is starting up etc) several presses are usually required before you can actually call the contact.
I just tried a trial version of microsoft voice command 1.5 (this I believe is what imate is shipping) unfortunately it cannot understand a word I say!! (could be the devonian accent).
I said 'call work' it said 'calling 999' I managed to hit it with a brick before it actually did call 999 !!!
Anyone suggest something that actually works (flawlessly). I dont mind training it if that means its gonna work!
Nigel
"microsoft voice command" all the way.
Thing is that it doesn't support dutch, but it does support english, german and american, so if you speak any of these languages you will have to get this program.
Dunno about the trial version, but the full version requires you to pronounce right. You can test this by letting someone call you first so you can hear how the program expects you how to pronounce it. (I have dutch names and they are completely different when pronounced by the voice command)
Hope this helps.
I've flashed my MDA Pro with the I-Mate JASJAR rom, and the standard voice dial on that works like a charm!
It even work from my Jabra BT800!
Grrrrr
I'm a native English speaker and it dont ruddy understand me!!
Sounds like many people here have gone for the JasJar rom on their devices. I guess I will give this a go - I just dont want to end up with a useless brick.
Nigel
MS Voice Command - works for me on my jas jar via my moto BT headset even in the car when driving (i.e. with plenty background noise).
If you follow the tips on the MS VC website it makes it even more reliable.
The HTC voicedial program works great for me, and complies with my HS810 headset without any issues whatsoever. In fact it's even recognised my commands with music running in the background. I've tried MSVC in the past on other XDA's and found it to be rather cumbersome.
Ant
I found that Microsoft Voice command when started via bluetooth headset does not turn the link off when it's finished.
The way i got this to work with BT was to replace the file sddialer.exe in the windows folder with the voicecmd.exe file from MS VC.
Does anyone else know a better way of doing this to allow for the BT headset to be turned off automatically once listening is finished ?
Voicedial works, I just find it really slow. It is 100% reliable on the recognition front though.
What I noticed with voice command was an instant response. Press the button and speak, no wait of any kind for the 'beep'.
Voice command simply sticks an icon on the task bar, it does not have to load some monster gui before you can speak. Ditching the gui would be a step forward for the built in voicedial.
Nigel
steverae said:
I found that Microsoft Voice command when started via bluetooth headset does not turn the link off when it's finished
Click to expand...
Click to collapse
Hi
How did you get voice command to respond to the bluetooth headset in the first place?
With VC installed, the button on my BT headset is still starting the old HTC voicedial software.
Is there some registry setting somewhere to tell it what to launch?
Nigel
Yes there is a simple registry hack, it's posted else where in these forums but here it is again
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
This works for me and everyone else who has tried it AFAIK
Hi
How did you get voice command to respond to the bluetooth headset in the first place?
With VC installed, the button on my BT headset is still starting the old HTC voicedial software.
Is there some registry setting somewhere to tell it what to launch?
Nigel
Click to expand...
Click to collapse
I simply replace the file sddialer.exe with the voicecmd.exe and renamed the voicecmd.exe to sddialer.exe. After a softreset that's it.
Still can't fathom out a way to close the BT link though without doing it manunally from the headset.
Also does anyone have Fonix Voice Central installed on their Universal, i always get an error saying unsigned program or summit like that when i try to install the trial.
voicedial
I am italian mother tongue. Cyberon voicedial works incredibly well. I tried vito's program in the past. Average it could recognize 10%.
The cyb's software is awsome. I use it with a Jabra BT800 headset and recognize voice even in noisy environment.
Must tell that I am very satisfied with my JJ. Absolutely no problems in any way.
Installing unsigned apps on WM5
Trying to install Fonix Voice Central 3.0 Trial on my new Universal but keep getting an error stating unable to install as it is from a untrusted source or is an unsigned program.
Please help
Hi
OK, so its more reliable when using the bluetooth headset - it even understands devonian! BUT and this is a big but... why the heck does it not work when the device is closed (screen inside) and switched off??
Nuts... I get the beep from voice command after pressing button on the headset, but it ignores what I say. Performing the same thing with the screen open laptop or pda style (with device switched off) works fine, but not with the ruddy screen closed.
Anyone else experienced this?? Screen closed it how my device stays most of the time.
I see what people have been saying about it leaving the bluetooth channel open after as well - mad!
Nigel
Voice command does not respond when unit closed
Hi
Voice command not responding when unit closed (screen inside), and using button on BT headset.
Has no-one else found this, and if it works for them can they post rom versions. Certainly does not work on MDA Pro shipped rom!
When unit open, or screen folded outside PDA style, VC does respond to BT headset fine. Just not when its closed.
Nigel
I have imate JJ italian rom.
Works perfectly with Jabra BT800 and device switched off (screen closed down).
No problem at all!
Thanks - looks like a bug in the ancient MDA Pro software.
I was holding off flashing it with imate roms case I heard a rumour that t-mobile are about to release a new rom soon which may be newer again I suppose.
Nigel
Well, I put the imate rom on there and that did not solve it. Voice command does not work from bluetooth headset when unit closed. It gives me the beep prompt to say its listening, but it never responds. Open screen and all is well.
Save me some money anyway, no point in buying Voice Command if it does not work properly!
Nigel
veletron said:
Voicedial works, I just find it really slow. It is 100% reliable on the recognition front though.
What I noticed with voice command was an instant response. Press the button and speak, no wait of any kind for the 'beep'.
Voice command simply sticks an icon on the task bar, it does not have to load some monster gui before you can speak. Ditching the gui would be a step forward for the built in voicedial.
Nigel
Click to expand...
Click to collapse
Ive just been using the bog standard voice recognition. No problems at all, even works with background noise.
Im guessing that some people havent read instructions properly
The HTC software that comes with the device does work (reliably) its just too slow to be of any use.
10 secs to respond when unit is off/closed. If I dont get a prompt response i'll press the button on the headset again which seems to confuse the hell out of it.
This is my reason for trying voice command... Response time from voice command (from unit off) is 2 secs max. Unfortunately it does not ruddy well work when lid is closed (no matter whether unit is on/off).
Nigel
Sorry for the cross-post...but I originally posted this in the general Herald forum...but since it involves an upgrade per say...thought I'd throw it in here too.
Fairly new here...got my Wing about a week ago.
I installed the PDAVIET Wing ROM with no issues (thx to everyone here on that long thread to get it going).
I have the Wing paired up with my car...no probs as the car has it's own voice recognition and simply dials the phone, etc.
My problem is this....
I have a Motorola H700 earbud. It paired no problem. Using the Wing directly, I have the right side button trigger the voice activated dialing. I than just speak and it dials whatever number I have associated. All good.
When I have my earbud on...and I press the talk button...it brings up the dial pad on the phone...NO voice recognition. I can manually press the button on the Wing...speak my number and it will dial....however that defeats the purpose of true hands-free.
When I press the call button on by earbud...how can I get the phone to jump into the voice recognition dialing instead of the regular manual keypad? I would love to be able to press the talk on my earbud...than the phone jumps to the talk mode...and I speak my saved voice dial. Otherwise, the bud is deemed useless b/c I don't want to have to touch my phone.
I hope that is all clear and that someone can help me out.
Thx in advance for any help.
PS. I went to the Bluetooth options for my H700 earbud...and the only option is what communications the earbud supports...which is only "hands-free". I was expecting a more thorough layout of earbud key mapping, etc. I thought I could trigger the voice recognition dial when I hit the talk button on the bud. None such luck.
HELP.
Cheers...B.
help...bump
I just upgraded to this and I am having the same problem with my H700.
Did anybody find a fix for this?
Ok so I was having the same issues. My bluethooth was not being initiated by the button on the earbud. This was from another thread, I did it and it works fine now. Hope it helps........
Originally Posted by nextpimp
My Contribution....Since people dont want to find it out their own.... Voice Speed dial Over Bluetooth ...
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Itje ... Awesome Rom... All I gotta do now is unmap Voice Command from the hold funtion on button five.... Its not listening to me in the settings so gotta go to the reg... Help would be appreciated as the registry really isnt my strong point.
everyonce in a while i can get it to partially work, i'll activate by pushing the bluetooth button and get it to ask me to "call this person" but i say yes it doesn't respond. other times pushing the bt button does nothing, and randomly it will read part of a text message through my bt but not consistent and not all of it. i found somewhere yesterday a zip file that had the registry hack for a kaiser with the same issue and now can't find it to try. are there any hacks that will help me out with the blackjack i617 running windows mobile 6? i realize this may be the wrong forum, but it had the most people in it.
spiderguy84 said:
everyonce in a while i can get it to partially work, i'll activate by pushing the bluetooth button and get it to ask me to "call this person" but i say yes it doesn't respond. other times pushing the bt button does nothing, and randomly it will read part of a text message through my bt but not consistent and not all of it. i found somewhere yesterday a zip file that had the registry hack for a kaiser with the same issue and now can't find it to try. are there any hacks that will help me out with the blackjack i617 running windows mobile 6? i realize this may be the wrong forum, but it had the most people in it.
Click to expand...
Click to collapse
instead of yes say "correct"
In the tutorial they say if it doesn't pick up shorted words like yes to use longer ones. Yes would only work about 40% of the time. Correct works 100% for me. Only problem though that i had.
my prob is bc of bj2 not having the ms bt stack. is there a reg hack to where i can use bt all the time and not randomly as it is now
so does anyone know a registhack that will allow the voice command to work with bluetooth on the blackjack 2?
I recently got a Samsung WEP500 to go with my Cingular 8125. It works great except for one problem: The WEP500 only has a single, big multi-function button. Pressing this button just once while the phone is idle will cause the phone to redial the last number. This is a pain because the button is really easy to accidentally activate when putting the earpiece in or when you just have it in your pocket. It's gotten to the point where I'll call my voicemail just to have that as the last dialed number, so I wont pocket-dial someone I know.
Is there a way to disable the redial functionality of a bluetooth hands-free headset? I'm running a pretty stock Cingular build, with the default ROM of 2.0.25.11 for both OS and radio, which is of course WM5.
I'd be most appreciative for any help. Thanks!
+1
Would be nice to leave my BT radio on all the time.
I am also having the same problem with my Bluetooth. Still waiting for a solution.
WEP500
I aslo have same problem.
Have you tried turning the headset off when putting it in your pocket?
I NEED this too. I have the Scala Rider Q2 for my motorcycle and a single press on the button re-dials ther last number I called, whereas if I hold it, it turns on the radio.
I often find myself trying to listen to my music and end up speaking to someone...
Thanks for the idea of calling my voice mail BTW, never thought of that.
I know this is an old thread, but just in case someone is still interested in this, you may try solving it the way i did for my HTC Polaris. I have no idea if Wizard got similar bluetooth stack or even if WM5 got an option to load audio gateway at commands extensions in general, but, well, it worth a try.
http://forum.xda-developers.com/showthread.php?p=5355333#post5355333
Disable Bluetooth-initiated redial.
Hi I´ve tried your cab file om my HTC touch cruise WM6 with a sony-ericson bluetooth headset device but it did´nt work.
Do You have a alternative solution or maybe an updated cabfile?