Database Users

MachinaGod RAPI Unlocker - certificate disable on WM5 v0.1

Hi,
Just an util I got together in no time.
Rapi Enabler, certificate disabler.
Enable all the security on your Windows Mobile 5 phone.
Credits to the author of the ce remote tools.
Instructions:
1. Download the attached file (you have to be logged into xda-dev);
2. Extract it somewhere in your computer
3. Connect your phone via activesync
4. Run the EnableRapi.bat (on your computer)
5. Done.
Have fun,
Ricardo

How does it differ from this CAB file I pulled off the HTC Apache?
I use this in my Extended ROM so that I can run unsigned applications, CAB files, and CPF files during the initialization procedure after a hard reset.

Hi BTT,
This is based on that exact cab. The only difference in enabling RAPI calls also, and doing it without needing user interaction, only needing a activesync connection.
Is a little utility I use for integration into batch files.
Bye,
Ricardo

Certificate disabler..
Probably a dumb question, but is it a replacement fort certchk on 2003 devices? Still looking for such a program.
Thx

Thanks Machinegod, this worked well. I used it on an XDA exec will it work with all WM5 devices?

Hi Machinagod
Is there a way i can call your routine from code?
I have developed software for WM5 but cannot access the database with the standard MS settings. I would like to give my users the option to unlock the rapi calls and install automatically.
Thanks in advance
Steve

ronaldovic said:
Certificate disabler..
Probably a dumb question, but is it a replacement fort certchk on 2003 devices? Still looking for such a program.
Thx
Click to expand...
Click to collapse
to ronaldovic: I believe this utility is for disabling signed applications so you can install apps that have not been signed. I have used BTT cert cab in my extended rom since he posted it (Thanks BTT, It has been very usefull)
If you are looking for disable cert check so you can activesync with MS exchange without a a SSL . Certificate connection, Micro$oft still offers a download to disable the cert sync check..
see http://www.microsoft.com/downloads/...b8-8b3a-4f1d-8e94-530a67614df1&displaylang=en

Miracle Registry
i checked many registry of "Security policies" in different device, and also SDK.
http://asukal.seesaa.net/article/12583144.html
You can understand how change it for your neccesity.
this was for your refference.
and also i got made one registry file which has many "Certificate Sotre"
from different setting devicees and CABs and SDK Emu.
This registry make your device to enable working many kinds of dll and exe or any other files without digital signed(not for all)
multi user interface files also can effect without digital signatures.
(shellress still can not, but worked with Smartphone signature)
The security revel will be same or lower than SDK emu.
but not completely finish to edit it.
so possibility of some side-effect or unkown problem.
Hope understand this point and use it as test.
But once you use this registry, you got understand why i said it miracle.
just import this registry and make soft reset.
"syntac error" displayed when you import this, but works.i will cheking the reason of this error.
lets test it.

Re: MachinaGod RAPI Unlocker - certificate disable on WM5 v0
I try to use it on my new Jamin but nothing happen.... Prog still not work.
Pls I'm a newbe, Can you help me ?
Thanks a l ot

Hi MachinaGod,
Could you tell me please what exactly this RAPI unclocker is doing? Is it possible to undo it? RAPI locker or something? Is there any security threat after you execute tis program?
Thank you!

cingular
please tell me what tool can unlock (simlock) my cingular 8525, Thank you very much!

hmmmmmmmmytfghvghdgfgfdtrsdr

unlocking spv m1500
hello,
i tried the RAPI unlocker but it did not work,
could it be because my Pocket pc is running 2003 CE?

hi
someone can send me the file i can download him pls
and one qwuestion this unlock mi simlock???

htc 8125 need help please
machinagod said:
Hi,
Just an util I got together in no time.
Rapi Enabler, certificate disabler.
Enable all the security on your Windows Mobile 5 phone.
Credits to the author of the ce remote tools.
Instructions:
1. Download the attached file (you have to be logged into xda-dev);
2. Extract it somewhere in your computer
3. Connect your phone via activesync
4. Run the EnableRapi.bat (on your computer)
5. Done.
Have fun,
Ricardo
Click to expand...
Click to collapse
i have a htc 8125 and tried your method and it never gave me a code but when i put my sim card in it says sim lock and unlock? explain how to unlock this d$$m phone.It is a cingular phone but i dont have that service.it is version 2.25
[email protected]

How to add application to system startup?

For example, I must add application "Windows\calc.exe" to startup.
How can I do it?
It must work on Smartphone 2003 and Windows Mobile 5.0.
Some info is here:
http://msdn2.microsoft.com/en-us/library/aa909369.aspx
but it don't work.
Help me please

2007fs said:
For example, I must add application "Windows\calc.exe" to startup.
How can I do it?
It must work on Smartphone 2003 and Windows Mobile 5.0.
Some info is here:
http://msdn2.microsoft.com/en-us/library/aa909369.aspx
but it don't work.
Help me please
Click to expand...
Click to collapse
Couldn't you just paste a shortcut to your application to Windows/Startup folder?
larna

Windows Mobile 6 Updatefunction

If I install the Windows Update.xml from the XPlode package can I then problem-free my equipment update or can thereby are determined that I no legal WM6 use?
Sorry for my bad English.

tested this function but not new updates are available.

hello!
do i have to install those included XML-files in explode's cab pack as well?
how can i install XML files....?
pleas help!
thx,krz

The readme file xplode put into the archive has the instructions.

or everyone can use cabs2.rar
so if you have both cabs.rar and cabs2.rar you will have in one place a cab for installing mms and a cab for enable it in messaging app, a cab for installing windows update and a cab for import server settings for update (enable the capability of update), and a cab for windows mobile device center under windows vista (some settings about manifacturer - t-mobile and model mdaiii, support link, high res BA icon). So you have no more xml files, i created cabs from them for easy install

xplode said:
or everyone can use cabs2.rar
so if you have both cabs.rar and cabs2.rar you will have in one place a cab for installing mms and a cab for enable it in messaging app, a cab for installing windows update and a cab for import server settings for update (enable the capability of update), and a cab for windows mobile device center under windows vista (some settings about manifacturer - t-mobile and model mdaiii, support link, high res BA icon). So you have no more xml files, i created cabs from them for easy install
Click to expand...
Click to collapse
okay! lets see if i got that right! if i use the updated cabs from cabs2.rar, the XML files from the original cabs.rar become obsolete, right?!?
very cool, thx guys...

yes you understood me right

I have installed both cabs, but when I try to search for updates it says "connection to the update server was not available. Check your data connections and ensure the date and time are correct."
I have done this, but with no luck???

you did not install the WU enable cab, or the instalation was unsuccesfull try to install it again

Getting started with ROMs

I want to modify the messaging program but I've not done any WM coding before. I've looked at a number of posts on the forum and taken a look at the wiki but I'm still totally confused about where to start.
My current view is that I need to:
Extract the messaging program from the ROM I'm using
Is this possible? If so, what tools do I need? I found a few utilities that look promising on the wiki but there is no documentation for them so I've got no idea how to use them.
Disassemble the program
Can I do this with Visual Studio? Ideally I would like to step through the execution to find the bits I need to change, can I do that with the extracted program in the WM emulator? Or can I do it directly on my PDA?
Patch the program
I can probably figure this bit out by myself.
Get the patched program onto my PDA
As the program is in ROM, I'm assuming I'll have to re-make the ROM. Or can ROM files be updated/overwritten without rebuilding the ROM?
Each of those steps is assuming the previous one is the correct approach and is actually possible. I'm not looking for hand holding at every step, just some good pointers to relevant information and tools. Thanks.

0. - which programm you want to hack ?
1. What type of PDA you use ?
for example - for hx4700 -
prepare_imgfs.exe dump.dat
viewimgfs.exe imgfs_raw_data.bin
2. IDA - diassemble, or Visual Studio for debugging - if you know how
3. What type of PDA you use ?
for example - for hx4700 - like vivi kitchen.
4. ...

Thanks for your reply.
0. - which programm you want to hack ?
Click to expand...
Click to collapse
The messaging program, is it called Outlook Mobile? Do you know if it is native or managed code? If not, what's the easiest way to tell?
1. What type of PDA you use ?
for example - for hx4700
Click to expand...
Click to collapse
I've got a Kaiser. Currently running "udK 8.0 R0 Vega" ROM (WM6.1). Forgot to mention that in my previous post.
IDA - diassemble, or Visual Studio for debugging - if you know how
Click to expand...
Click to collapse
Does IDA support remote debugging on Windows Mobile? Also, are there any restrictions on what you can debug in VS, ie. do they stop you from debugging things you don't have the source for or are Microsoft applications (eg. Outlook) restricted from debugging in some way?
I'm finding it really hard to get decent information on these kinds of things. If I actually manage to get anywhere with this then I'll write up some kind of guide for the wiki.

Ok, I've used this tool to extract the ROM and get a file called 00_OS.nb. I then got these tools and managed to dump the NB file so that I now have all of the files inside the ROM.
I've been playing about with IDA but when I try and run poutlook.exe in the debugger, it runs but exits straight away (ie. it doesn't create a window on the PDA). I tried copying poutlook.exe onto my device but it doesn't run, I think I need to get it running from the exe before I do anymore IDA stuff. I remember reading somewhere that executables in the ROM image have been manipulated in some way (addresses rewritten or relocated or something), is that what is affecting it? Or do I need to run some additional tool on the extracted exe before it will run standalone?
How do I get an executable extracted from the ROM to run on my device? Or do I have to roll it all up into a ROM for it to work?

Unable to install any software in my HTC Shift

Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards

Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram

Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here

saiweb said:
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Click to expand...
Click to collapse
i'm using the original rom i haven't changed it

deadnex said:
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
Click to expand...
Click to collapse
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards

Abu Shahad said:
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Click to expand...
Click to collapse
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way

deadnex said:
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
Click to expand...
Click to collapse
thanks man worked perfectly

when i press modify it tells me thats theres an error and it closes
please help