Related
I know this has probably been listed in the past, but what MP3/Media Player do you use?
If possible, include a link to where it can be downloaded.
The ultimate, The Core Media Player
http://tcmpc.corecodec.org
For winamp lovers,
http://www.pocketmind.com
it's actually...
http://tcpmp.corecodec.org/about
Dave
Complete with Today screen plugin, the wonderful MortPlayer
http://www.sto-helit.de/modules/edito/content.php?id=7&sel_lang=english
8)
Is there any player with the balance meter (left/right)?
Sure TCPMP is the best at playing all sort of media
When I can't see a video on my pc, 80% chances are that TCPMP will read it :lol:
And it has a lot of features eg. the speed of playback, equalizer.. With the last one u can even boost up the loudspeaker volume!
Finally, it's rather simple to use: with hotkeys for everything u can do anything...
Only drawback is poor quality of 3gp playback and no midi at all: but I'm using album app for these :wink:
Saluti, MocciJ
PocketMusic for mp3's (skinable and has a nice equaliser function) and BetaPlayer for video (simple and I convert everything to DivX and it handles them with no probs)
Are yo able to playback fullsize Divx files smoothly in TCPMP.
I have a Magician and if I stream 720x480 divx video over wifi on playback from a SD card the video will always stutter. I get about 10s and then it pauses. Seems like a buffer issue.
Are there any tweaks for TCPMP or will overclocking the Magician help?
TCPMP for videos and MortPlayer for MP3s with my A2DP headset.
Gsplayer by greensoftware [freeware]. Turns screen automatic off, functions can be mapped to hardware buttons.
Mujja said:
Are yo able to playback fullsize Divx files smoothly in TCPMP.
I have a Magician and if I stream 720x480 divx video over wifi on playback from a SD card the video will always stutter. I get about 10s and then it pauses. Seems like a buffer issue.
Are there any tweaks for TCPMP or will overclocking the Magician help?
Click to expand...
Click to collapse
full sized 700mb divx movie files play fine running from SD on my magician (using tcpmp)
But ill normally resize and reencode, but it is handy being able to run stuff without encoding first, if theres not time to do etc.
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
search for TYTN + TCPMP on this forum... this has been discussed A LOT.
pergolesi said:
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
Click to expand...
Click to collapse
Hi there & welcome to our videoplayback problem:
http://forum.xda-developers.com/viewtopic.php?p=354421#354421
It's not all bad, but I can't find any workaround for the meantime. Look out for The CorePlayer (The new TCPMP), hopefully when released, it will address these issues we have discovered. Meantime I am using 'ImToo_DVD 2 Ipod Converter' , which converts to high quality Mp4 format and plays back just fine for now and is definately on par with Divx/Xvid AVI encoding at 768kbps! It also converts a whole film in practically 20 mins plus compared to PocketDivx_Encoder or DVDx.
I have tried the Im too to ipod converter, and have had some very pleasing results.
Could you possibly let me know what settings you have checked/unchecked in TCPMP, for optimum playback of the resulting mp4 files?
Thank you very much, your help and advice is greatly appreciated.
Best regards
Pergolesi
yeah I had a good experience converting to mpeg4 except the filesize was much larger (almost twice the size as divx) is this the norm cause of divx compression?
MPEG4 Videos in TCPMP
Personally, I use the following settings for ImTOO DVD to iPod Converter:
Video Bit rate:512 or 768 (difference is negligable but size is better @ 512kbps)
Audio Bit Rate:64
Sample rate:22050
Channels:2
Video Size:320x240
Profile: iPod MPEG-4 Movie (*.mp4)
Zoom:Full (keep aspect ratio)
Split:Infinite (though it's nice to have a DVD encoded in the chapters it came in - TCPMP will play them in the correct order if saved as 'playlist')
**Do Check the Audio settings (under the Menu bar) as your DVD will probably have options for differnt Audio i.e English.
I know more settings are available, but this is a short-term fix for me (with acceptable results for me) until the new 'CorePlayer' is released.
In TCPMP the settings really don't make much of a difference either, but just make sure you have 'Video' set to 'Rawframebuffer' mode. I have found that all AVI and MP4 playback without major gripes, but the MP4 gets better results whilst benchmarking using 'ATI decoder'. Fat load of good that does you when it comes to playback though (back to rawframebuffer mode).
P.S. for smaller filesizes, just reduce the video bit rate like you would in AVI encoding.
MPEG4 Videos in TCPMP
Great info, I'm sure others will find this just as helpful as I have.
Thanks again.
Pergolesi
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
ruirocha said:
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
Click to expand...
Click to collapse
I use Rawframeuffer mode, but GDI will do also. Though benchmarking yields better results in Rawframebuffer mode for me.
I'm using TCPMP. I set ATI IMAGEON Decoder on.
When it start, the screen is not viewable.
But I press the action button, when the movie plays it is normal.
When I paused and resume, video play with low frame rate.
I goto Option, Speed, Select 100%, it's normal.
I am stating to convert some of the movies and to be played on my hermes on the go, but eventually I found out that the movies converted thru pocketdivxencoder eventually dropping out frames.
I want to know the best setting for converting video for Hermes...
Is it better to convert to WMV at a particular bitrate than converting to DiVX?
THanks a lot.
If you're gonna use the ATI Imageeon Decoder, video bitrates can go up to 1.2MBps, but you will sure get a lot of artifacts. if you intend to use Raw Frame Buffer, video bitrate can go up to 700KBps (audio 128KBps), but also remember that Pocket PCs can play higher bitrates without dropping frames when the video is wider, e.g. playing a 16:9 movie clip is somehow easier than playing a clip with 4:3 aspect ratio.
BTW If you want to stream the audio to your BT Headset while watching a clip, a video bitrate of 410KBps (audio 128KBps) is good, but you will have to use the ATI Decoder.
Cheers!
Rockman27 said:
I am stating to convert some of the movies and to be played on my hermes on the go, but eventually I found out that the movies converted thru pocketdivxencoder eventually dropping out frames.
I want to know the best setting for converting video for Hermes...
Is it better to convert to WMV at a particular bitrate than converting to DiVX?
THanks a lot.
Click to expand...
Click to collapse
You need to use TCPMP player and download the ATI imageon fix cab (search for it), a few adjustments and your pocketdivx converted films will play perfectly.
i use sompy media encoder, its free and has a stting for pda screen size and sound that is realy good, just load the file and away you go.
Take a look HERE ive used plenty of videos encoded this way and works a treat.
In coreplayer (aka TCPMP) i use Directdraw as ATimageON produces artifacts until they allow a non-rgb filter to be used.
mrvanx said:
Take a look HERE ive used plenty of videos encoded this way and works a treat.
In coreplayer (aka TCPMP) i use Directdraw as ATimageON produces artifacts until they allow a non-rgb filter to be used.
Click to expand...
Click to collapse
Thanks for your guideline and I have got some satisfactory conversions.. but when I switch to DirectDraw in TCPMP, it gives me black screen no matter which type of video files I am playing.
When I switch back to ATI Imageon, sometimes it will work but sometimes I will get weird screens (the whole screen got messed up and "jumping around"). The only perfectly working selection for me is RAW or GDI.
Am I doing something wrong in the setting with the directdraw and atiimageon? Thanks again.
With bitrate size there is a law of diminishing returns. After a certain bitrate you will not notice the difference on the Hermes screen.
After years of encoding/transcoding. I have settled on these paramters as the other variable is trying to fit as much onto my MicroSD as possible.
Video DivX @ 350 kbps, high quality, 2 pass.
Audio AAC 64 kbps 44 KHz (SSR profile)
Using MP4 as the container.
The quality is pin sharp. Using higher bitrates for me yield no benefit when viewed on the phone. The filesize comes out at approx 170 meg for 1 hour.
When I get back I will upload some samples of stuff I've done and I don't mind watching on the phone, typically 4:3 like The Wire and of course the Simpsons.
Wam7 said:
With bitrate size there is a law of diminishing returns. After a certain bitrate you will not notice the difference on the Hermes screen.
After years of encoding/transcoding. I have settled on these paramters as the other variable is trying to fit as much onto my MicroSD as possible.
Video DivX @ 350 kbps, high quality, 2 pass.
Audio AAC 64 kbps 44 KHz (SSR profile)
Using MP4 as the container.
The quality is pin sharp. Using higher bitrates for me yield no benefit when viewed on the phone. The filesize comes out at approx 170 meg for 1 hour.
When I get back I will upload some samples of stuff I've done and I don't mind watching on the phone, typically 4:3 like The Wire and of course the Simpsons.
Click to expand...
Click to collapse
What program do you use to do this encoding? I would like to try out your settings on a few movies i have been waiting to encode myself.
Globalrebel said:
What program do you use to do this encoding? I would like to try out your settings on a few movies i have been waiting to encode myself.
Click to expand...
Click to collapse
For a long while I was doing it manually with Virtual Dub Mod and demuxing audio etc but this can be arduous when doing a lot of stuff.
Nowadays I tend to use WinMenc .61 with the Mencoder binaries. It's not the best GUI in the world, in fact it's pretty plain and could do with updating but it gives the control I need, batch encoding, and is very fast.
I wiill link them all here when I eventually get home.
You could try PocketDivX encoder (and Lathe) which use Mencoder as well but were half the speed for me when it comes to the 2nd pass when I tested them. IIRC they don't give as much control either.
Alas no time to give links to binaries just yet but Google might help if you're in a rush. Here is a quick sample of Prison Break with the above settings.
http://www.wam77.pwp.blueyonder.co.uk/Prison.Break.S02E18.Clip.350kbps.mp4
Found a bit of time
Download Winmenc http://yawoogle.googlepages.com/winmenc.0.61.zip
Download MPlayer http://oss.netfarm.it/mplayer/builds/mplayer-rtm-svn-23169.7z
Download Mencoder http://oss.netfarm.it/mplayer/builds/mencoder-rtm-svn-23169.7z
Download PthreadGC2 ftp://sourceware.org/pub/pthreads-win32/dll-latest/lib/pthreadGC2.dll
Place all in the same folder. Run Winmenc.
If you want to try my options download this http://www.wam77.pwp.blueyonder.co.uk/Mp4_PocketPC_DivX350_AAC_320.240.ini
and then click on load profile and point it to the file. (There are others in the default profile dir that you can play with)
This will also do Xvid, DivX, X264, mpeg2 (in .avi container) with 2 pass options. If you want ultra sharpness you can try higher bitrates but I can not tell for most things. If you also want to keep the file size fairly small I have found 350 kbps to be a good trade off. Run a few tests at different bitrates and decide for yourself.
Awesome guide Wam.
Using your setttings I have been playing with the x264 codec. It's alot more demanding on the cpu. however it does produce very noticeable far superior results over divx. It also takes a good 2x more time to encode, but nvm that the end result which counts.
Getting x264 playing on hermes appears to be a slight headache for some.
TCPMP used to support it, now doesnt.
So you have 2 options CorePlayer or old beta version of TCPMP 72RC1.exe
IIRC I remeber reading the coreplayer is newer more effeciant by approx 10% than the tpcmp x264 beta decoder. I also had a bit of a headache getting the aac audio codec working.. maybe cos I have a wm2003 device. I clicked on and installed far to many differnt things to know how I fixed it .
Also apprently the ATI ImageOn boosts performance nicely for 264 files. but causes problems with divx xvid etc.. which are commonly used.
1) get new rom ak3.. 2)install atifix + If you set zoom to 100% - artifacts dissapear.
Nice thread here. - http://70.84.52.18/corecodec.com/forum/index.php?topic=3723.msg22042#msg22042 - srry if cross forum linking isnt allowed..
I have only a dell axim x5 - maybe 5 years old now, but it has a 400mhz intel xscale cpu which I guess is comparible to what the hermes samsung cpu can do. So my testing regarding performance maybe a bit off. I can confirm though x264 codec is the way forward. All the new devices use it for good reason.. ipods. playstaion portables, blueray. hd tv's.
A little more clarifcation needs to be done. to provide us all with the ultimate setup. one thing for sure. wams settings are great. and produce fantastic results. the software he reccomends - winmec is real nice and easy to use..
I also spent a fair bit of time with MEgui front end and, it has so many more options.. which could be a bonus but was just too confusing for me. Also winmec and Megui may have shifted the timing of frames off a tiny bit.. I'll need to check on a longer file to see if there was any syncing issues.
I'll be back soon with a definative guide.
Oh yeah x264 is definitely the way to go and the improvement are easily noticed for the same bitrate.
I did a few x264 but this was back before WM6 (AKU 3.3) and the ATI fixes and I could play smooth BUT without audio which wasn't much use.
I might give them a try again when I have more time to play but for the time being DivX is giving me good results... and is quick!
Oh I am using TCPMP 0.81. I would use Coreplayer 1.04 but until they fix the negative audio sync bug I am forced to use TCPMP.
What encoder should I use to encode videos for the diamond so that it uses the built in mp4 codec?
I tried SUPER software to encode but the videos don't show up in the album and won't play in WMP. I have TCPMP but when a camera perspective changes it becomes choppy. Does Core Player 1.2.5 have the same effect with VGA videos?
anyone? pleas at least tell me your experience with core player?
you are missing the second codec you suggested. typo maybe? thanks anyway your two cents helps a lot.
bugmenot said:
What encoder should I use to encode videos for the diamond so that it uses the built in mp4 codec?
I tried SUPER software to encode but the videos don't show up in the album and won't play in WMP. I have TCPMP but when a camera perspective changes it becomes choppy. Does Core Player 1.2.5 have the same effect with VGA videos?
Click to expand...
Click to collapse
I know this is an old thread but...
I use videora i-phone 3g converter.
Set it to use the H.264 480x320 768kbps stereo/128kpbs Advanced profile.
It spits out excellent quality with no frame drop and its full screen.
Its recognised in wmp and touchflow video tab.
best of all its free
my favourite is slysoft clonedvdmobile + coreplayer. i encode in ipod v5 high res 640x480 (about 640x360 for qidescreen) with quality about 18. 1012kbps, 2 pass. makes about 700mb for 1hr 15mins
Good morning!
I'm using tcmp (the core pocket media player) on my diamond and for the conversion I use PocketDivxEncoder. It's fast easy to use and very flexible with the settings such as dimensions sound and video quality ...
Links:
TCPMP with built in flv support
PocketDivxEncoder
I tried many conversion programs and codecs and I've come to the conclusion that smooth vga(640x480)-video-playback isn't possible on the diamond. Reducing the resolution to 480x360 however brings suitable results with virtually no dropped frames when playing in TCPMP or Coreplayer. The resulting filesize is also very convenient (about 300mb per hour, 200mb for animes).
The best conversion program I tried so far is SUPER, which additionally is Freeware
here is a download link: http://www.erightsoft.com/SUPER.html#Dnload
I created two profiles for SUPER (one for 4:3 videos and one for 16:9) which can be easily loaded via right click anywhere in the main window "Import ..."
ps: I also liked the videora i-phone 3g converter suggested by GutsyTripod, but the playback performence of the mpg4 video seems to bee slightly slower (about 10-15%) than the xvid video produced with SUPER
I am having a lag problem playing some HD videos on my Xperia with Jack's 3.4 Med rom using Coreplayer 1.3.
Videos I tried:
Transformers 2 HD Trailer (852x355, 2643kbps, 23fps)
The Prodigy-Omen (1000x432, 2663 kbps, 25fps) (800x480, 1200kbps, 25fps)
The highest quality sample at: http://forum.xda-developers.com/showpost.php?p=3045216&postcount=2
Plays all the regular videos/movies fine (Prodigy-Omen at 400x240, 644kbps, 23fps)
I tried directdraw and qtv with tytn II driver mode enabled.
How can I solve the HD playback problem?
Thanks.
EDIT: O MY GOODNESS!
I just saw the sticky on the top of the page...I feel so silly.
Thanks all.
If you are converting the video to mp4, than you should better use WMP, so that you can utilize vga's acceleration. Even with acceleration I really doubt that you can play 852x355, 2643kbps with no lag or missing frames. And if you use coreplayer, than you will get even slower playback performance. I can't even play xvid 640x352 800kbps without frame losses on coreplayer.
CorePlayer can't use hardware video acceleration...
IMO, the best way is to use TouchHD video converter to recode video and use Windows Player to watch them
Windows Player can use hardware video acceleration
thelucius said:
If you are converting the video to mp4, than you should better use WMP, so that you can utilize vga's acceleration. Even with acceleration I really doubt that you can play 852x355, 2643kbps with no lag or missing frames. And if you use coreplayer, than you will get even slower playback performance. I can't even play xvid 640x352 800kbps without frame losses on coreplayer.
Click to expand...
Click to collapse
I recode video with touchHD converter and use windows player
I can watch Iron Man ( 800*336, MPEG-4 AVC 0.7 to 1.2Mbps, AAC 2.0 128Kbps) with no loss frames and no lag
At CorePlayer you can change buffering under settings that help a lot
the x1 can hardly handle standard def
Ohhh, thanks for all the tips.
Used TouchHD video converter and did them into MP4 but WMP says it can't load codec, really aching my processors...
Coreplayer plays my videos more smoothly than wmp ever does.