Hello all, I am trying to find a way to transfer voice call to PC so I can use PC speakers and mic to answer the phone. Anyone know what I can do? Thanks in advance.
I could do it through Bluetooth. Pair both the Device and your PC and connet to Audio Gateway service.
Once you get a call you should be able to answer it from the PC itself
Hi pprakash
Do you know if I need anythig program to do that?? I try to register my Atom thru BT but I couldn't locate Audio Gateway serv. Many Thanks.
Hi. I figured it out already. It is BT problem with XP Serv 2. All solved now so I can integrated auto answer with PC on top of home automation. Thanks again for your advice.
Related
This may sound weird, but does anyone know how to use the imate/xdaII as a bluetooth headset?
I am using pc to phone software and want to be able to wander round the room/house with my imate talking via bluetooth to the PC and to the pc-to-phone software on the PC.
I have a Sony Ericsson HBH-65 bluetooth headset but the battery life is TERRIBLE on it - talking for 30 mins on that will probably render the battery dead!
Looking forward to your comments!
this is not the answer to your querry but something related. when i bond my xda to my pc via bluetooth; to complete the pairing the xda asks you if you want to use the pc as a headset. out of kicks i pressed "ok" and when my phone rang the speaker of my laptop was the one which sounded. the bond between my xda and my o2 headset was gone. had to rebond the laptop and headset again...bottomline is that you can use the laptop as your "headset"...so from there maybe you can work something on the other way around?
cheers
Interesting!! The PC can be recognised by the phone as being a headset. Thanks for the response anyway - perhaps someone can make use of this.
In the bluetooth toolset that I have installed on my PC I can search for all devices that can be used as a headset - the HBH-65 appears in the search, but my XDAII doesn't.
Wondering whether someone has managed to tweak this to work.
regarding: The PC can be recognised by the phone as being a headset.
i haven't tried plugging in a mike on my laptop; which means that if it does work you can actually use your pc as a loudspeaker for conference calls.
regarding: In the bluetooth toolset that I have installed on my PC I can search for all devices that can be used as a headset - the HBH-65 appears in the search, but my XDAII doesn't. - now that's a little strange. i use a bluetooth dongle and when i search for devices my xda comes up and not the headset...
i don't think you can use your regular bt headsets for laptop / pc use; read it in one of the topics here somewhere.
cheers
Dear All,
I have been for the past 3 weeks trying to know if it's possible to write an
application that would send/receive the phone audio conversation to a pc if
the device is places on the cradel?
What i want to do is to use my pc's mic and speaker as a headset. I was
thinking that this can be done, since a friend of mine has bluetooth on his
laptop, i paired my phone with his laptop via bluetooth, and one of the
services provided was Audio Gateway, and used his laptop's mic and speakers
as a bluetooth headset.
I wonder how this is implemented since i want to do something like that over
the Cradel connection. or any other media as a matter of fact
Your help is really appreciated
Mustafa Rabie
You've got the answer in your post. Simply get a bluetooth adapter that preferably has widcomm drivers (I know they work like this). Set it up as an audio gateway and pair with it, hopefully you should now be able to use it as a headset.
Is there any pc program to emulate the functions of a bluetooth headset like answer the call or reject it, display the caller number?
hi all thanks for your replies:
fruitloaf - i think u didnt get my question. I want to emulate that, i want to write an application on the PPC Phone that when i answer i can capture the audio convo (mic/speaker) and transfere it to the PC maybe via the pass through when the device is on the cradel.
jacusi1980 - i will write an application on the PC that will handel the answering, dialing, rejecting etc. Which also i would like to know how can i control the answering rejecting etc remotely.
Thanks
HI,
I think this is a very common question and must have been asked before. i did a search but was unable to find a direct topic related to this problem.
I want to use my magician as a headset for PC. I have successfully connected magician to my pc activesync over bluetooth. Now i want to use my magician as a headset device for voice conferencing in Msn or yahoo messengers.
Any way of acheving this?
Thanks
I don't think this is possible. The bluetooth profile is missing and I don't think that any PDA can do this. Get yourself a bluetooth headset and use it together with your PDA and PC.
Hi All,
Here is an unusual one for you guys - you have really helped me out in the past; so here's hoping......
I currently work from home and would like to use my Bluetooth enabled Laptop as a handsfree kit for my Wizard. I suppose in a similar way to an aftermarket in car kit with caller display, contact navigation, dialling from the laptop etc, etc. I have all the stuff i.e. microphone, speakers, bluetooth on my laptop so I don't really want to buy an in-car kit to do the same job.
Is this possible, and how do I do it ??
I synchronise Outlook via Bluetooth, so I have no problem in connecting the two devices.
Just to clarify why I'm looking to do this - I have to place my Wizard in my study window in order to get a decent mobile signal. If I have it on my desk the signal disappears. I make all my business calls on my Wizard, and I am getting seriously fed up with getting up and down around 20 times daily to answer my phone!! Then if I need to refer to some info on my laptop, the signal vanishes when I get to the laptop 'cos I've moved away from the window..aaarrgghhh!!
Here's thanking you all in advance.
Possible Solution
As much as I know, and I understand, It is possible to use your laptop speaker and microphone to answer the calls on your Wizard. To do so,
1-Your laptop must be equiped with the WidComm Bluetooth Hardward and Drivers
2-Pair your Laptop with the Wizard.
3-Go to CommManager on Wizard then Setting > Bluetooth Select your laptop and in services check the handsfree.
4-Allow the full access to Wizard on your Laptop and connect to wizard.
5-You will see the handfree icon on Wizard.
Now on If any call comes you can hear the call on your Laptop speakers and Anwser via Laptop's Mic. But you have to stand up and go to Wizard to accept the call or dial a number. I not know if it is possible to answer from Laptop.
Thanks.
Thanks for the response Hacken.
I have also found this:
http://www.blueshareware.com/bluetooth_pc_dialer.asp
This enables a calls to be dialled and terminated from the PC via Bluetooth, but it doesn't work the other way around. I have been looking into this for a few days now and it would appear many people are also looking for a solution.
The market potential for a fully functioning Bluetooth/PC link must be vast as it could be a solution for disabled users in making phone calls, used in call centres, in car PC's etc, etc
hello all
I am trying to use my tmobile mda(wizard) as handsfree stereo for my laptop.i have allready pair my device via bluetooth using widcomm drivers.but it will steam music back to my laptop.i am not sure how to do this.or i have also heard that you can use your connected phone(with laptop) to answer phone call via your laptop?is it possible if yes how can i do it?
please help.
Thanks in advance