Hi is there a way to turn off the standby mode..
i tried to turn off the standy mode by unchecking the " turn off device if not used " in the advanced tab of power options ... but it still seems to go into standby mode after some time....
the reason why i want this is that i dont want to press the power button every time i want to use the handset... i want the handset to light up if i press any key
Please help
Ask a mod to move this thread to the Hermes forum maybe?
You are more likely to either find the answer or get an answer in there.
moving to hermes.
Related
Hi guys...
I am as techy as the rest of yew, maybe more so, but I am having a problem understanding one thing about this phone. I know it is something very simple that I am missing, but I can't find anything about it anywhere in the docs, either?
How does the "auto power off" feature work? What I mean by this is, I know we can turn the power off after two minutes or whatever, but I see that the green GSM radio light is still flashing. That's good, that's what we want because we want to be able to receive calls.
The problem I am having is that after a time (I am guessing it is the two minutes?) I can't get the screen to come back on? What am I missing here? Is it me, or is it a bad phone? Auto power off seems to make the phone unuseable until a soft reset.
I tried pushing the power button, nothing. I tried HOLDING the power button, nothing. I tried pushing the TALK button, nothing.
Is the auto power off different than pushing the power button once and putting the device to sleep? What I want is the device to go to sleep after two minutes. I want to be able to use the phone again without doing a soft reset every time.
I know this is something easy, but I can't quite figure it out?
Thomas <><
[email protected]
www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come The Light: A View From Inside The Autism Puzzle
Author, Light On The Horizon: A Deeper View From Inside The Autism Puzzle
I've been having a similar issue with my 8125. I seem to also have a problem when I turn the device off. I've been trying to pinpoint the circumstances, but haven't had any luck as of yet.
Have you made any progress with this?
hold the power bottom for 3-5 seconds , there will apper a Yes/No dia.tap yes will real shut off. Not good at eng.But is it easy to understand ?
i had a similiar issue recently on a phone i had forever, turns out that i installed GPRS connection monitor that turned the backlight off on my phone... after hitting the power button to wake it up it appeared my screen was still off, so if i turned it at the right angle i could see my today screen.. meaning the backlight was off, i had to keep it at that angle and navigate into the setting menu to turn the backlight on.. i couldnt find a fix for it so i uninstalled the GPRS monitor and havent had the problem since
Before I begin, yes I'm probably a relative newbie, yes I've searched the forum, and yes I've read the wiki.
I've got an 8525 running WM6 (thanks vp3G). I always use my phone in vibrate mode when I'm carrying it around, but I need to switch to audio when it is recharging (obviously I can't feel it when its plugged into the wall and sitting on the shelf). An old StarTAC phone of mine had a setting to toggle between vibrate and sound automatically when plugging in to power.
Is there anything like this for Windows Mobile, and specifically for the 8525? If there isn't, I may have to try to see if I can code this myself, but I thought I'd ask first...
Thanks for any help,
- ncdave
Try a search for Kyphur's Hold Comm Button Toggle program (or just "Kyphur", or other derivatives); it allows you to turn on/off the vibrate function by holding the comm button in once (to turn vibe on), then again to turn vibe off. Small pgm, works well, very little memory use. I know the search mechanism isn't perfect but even searching through the threads will work, which is how I found the program
Hope this helps
It sounds like your solution would be a profile switcher. There are programs out there that know to automatically switch profiles when you connect to the car/headset/usb/power...
would there be an application that will turn on the device when it's OFF. Reason behind this is that my power button wasn't working anymore so I need an app to turn on my phone. Apparently, my alternate route is using AE button plus for turning off, and to turn on my phone is that I have to take out the stylus, but I noticed that it used to consume battery usage...if I take it out on the second time it will eat up 2% of the battery usage...and I had even tried using the switch display off/on with the AE button plus but it will make my usage with my phone for upto 8 complete hours only....before I can even use my phone upto 12-14 hours...
if not an application, maybe remapping or registry hack will help..
please I need some help..
thanks in advance
anyone who could share or help.....thanks
What type is ur pda? Do u mean turn on from COMPLETELY turn off?
Go to Start,Settings,System,Key Lock and set it to "Do not lock buttons".
This way, any button press on any button will wake the device. You might want to lock it before switching off so you don't dial people by mistake.
iam using HTC diamond and currently have the SUN 6.1 with 2.5 manila version, but it seems that the keylock doesn't work properly on that ROM
thanks for all your help, just asking some other options here
how can i disable the fast sleep during call?
also how can i make any key to wake up the device from sleep mode instead of the power button?
Please advice
Malek_chaabane said:
how can i disable the fast sleep during call?
also how can i make any key to wake up the device from sleep mode instead of the power button?
Please advice
Click to expand...
Click to collapse
I see u are very angry from this from ce4arab then to here , but realy i made many search to get this for you but i got this link and u check
http://forum.xda-developers.com/showthread.php?t=521631&highlight=call+sleep
some one telling that the only way to close this option is to close the auto adjust back light option
Sorry for my bad help , but my device is touch pro so i have not information about ur one
Dudes!
Bros!
My power button has stopped responding!
Phone has fallen a few times, so that obviously must be why.
The phone is on right now, and I've set the phone to "Always On Display" because if the screen times out, there's no way to turn the screen back on, unless I call my phone, at least, not that I know of.
I've gone into Developer Mode and turned on USB Debugging.
Now, given that this is a hardware issue, which I know nothing about, and that there are lockdown restrictions in my hood, at the moment, I'm unable to get the phone checked.
So, can you savvy power users (pun not intended) please help me with how to turn the phone on and off without a working power button?
Can I connect my phone the PC and do it like that?
Or can I enter into boot menu without using the power button? (I haven't checked out how to get into recovery mode on this device.)
Just looking for a temporary way to turn the phone on and off, and find an alternative to the power button, until I can get the power button checked.
I can't even turn the screen off so it's draining my battery like crazy!
Thanks for reading, brothers!
Hope someone can help me out!
Cheers.
wokeaf said:
Dudes!
Bros!
My power button has stopped responding!
Phone has fallen a few times, so that obviously must be why.
The phone is on right now, and I've set the phone to "Always On Display" because if the screen times out, there's no way to turn the screen back on, unless I call my phone, at least, not that I know of.
I've gone into Developer Mode and turned on USB Debugging.
Now, given that this is a hardware issue, which I know nothing about, and that there are lockdown restrictions in my hood, at the moment, I'm unable to get the phone checked.
So, can you savvy power users (pun not intended) please help me with how to turn the phone on and off without a working power button?
Can I connect my phone the PC and do it like that?
Or can I enter into boot menu without using the power button? (I haven't checked out how to get into recovery mode on this device.)
Just looking for a temporary way to turn the phone on and off, and find an alternative to the power button, until I can get the power button checked.
I can't even turn the screen off so it's draining my battery like crazy!
Thanks for reading, brothers!
Hope someone can help me out!
Cheers.
Click to expand...
Click to collapse
Double tap on the screen does not activate the display?
There are some options in accessibility settings. Maybe there you will find a feature that can help a little bit.