Hello,
I have just updated the ROM of my P3600 with the actual Version of bepe ROM 0.51, but none of the "standard" GPRS Traffic Monitors are working.
spb GPRS Traffic Monitor: I can install and start it, but can't change any settings. No tabs for configuring, but just a "list" from 1 to 5 with the tab-names but no possibility to change any settings
Efficasoft: It seems that the install procedure passes, but I can't find any entries in the startmenu or in the settings
Any idea? Which traffic monitor do work with WM6 and bepe ROM?
regards,
Philipp
what rom is that???
Related
Is there a program to monitor the amount of data transfered via gprs when i connect to the internet?
SPB GPRS MONITOR
Well, try SPB GPRSmonitor - good statistics, wide settings, TODAY plug-in + startbar icon to monitor the current speed, amount of data transfered and so on... By the way, it's my first post since I installed the XDA-DEVELOPERS SPECIAL EDITION ROM 1.2! Fantastic! I'm only waiting for the same thing to be based on WM 2003. Any way, thank you, guys! Great job!
Does Spb Pocket Plus 2.5 working well on a Magician?
ovsoft said:
Does Spb Pocket Plus 2.5 working well on a Magician?
Click to expand...
Click to collapse
Yes it does...running PP 2.5 till it came out without problems.
Regards,
Primoz
Woks well, except one little thing - the BT icon in the tray dissapears after a soft reset. Anyone solved this?
Other have similar problems?
Gevor said:
Woks well, except one little thing - the BT icon in the tray dissapears after a soft reset. Anyone solved this?
Click to expand...
Click to collapse
I had this problem with Calendar Plus. BT went totally unreliable and I would get "bluetooth not found" errors. Ended up removing Calendar Plus and all was good again.
Ian
ianwood,
Well, I have problems with an icon only. The bluetooth itself is working fine. I was reinstalling everything today after a hard reset and was specifically waching for that issue. After installing Pocket plus the BT icon disapeared.
@Gevor
Did a clean install last weekend.
Also SPB Pocket Plus 2.5 build 2084
Still have the Bluetooth icon in the corner (did a few resets also)
So nothing wrong overhere
MDA II
Qtek rom (RUU172602WWE_Belgian_Shipping.exe)
T-Mobile radio stack 1.17 (HI_TMNL_17200_190_11700_Ship.exe)
Tuurtje
porblems at Pocketplus
there are some problems with pocketplus running on xda2 and mini..
you will not be able to see the storage card indicators as it has bugs in it. that's why SPB has disabled them (this is what i read from their website forum spbsoftwarehouse.com)
BT icon gone? have a read at pocket breeze website forum. this is how you overcome this problem:
There is a workaround for this problem.
It's not pretty, it requires hacking the registry, but it works.
I found it at http://www.ppc-welt.info/community/showthr...7403#post397403, but had to make a slight adjustment.
I assume that you know
- How to install form a CAB file
- How to create and edit a shortcut on your Pocket PC
- How to edit the registry on your Pocket PC
Ready? Here we go:
1) Download NoPluginsToday (you'll most likely want the ARM version) from http://www.ictinus.com/NoPluginsToday/
2) Install the CAB somewhere. Make sure you know the exact location of NoPluginsToday.exe (e.g. \Storage\NoPluginsToday\NoPluginsToday.exe)
3) Create a shortcut to NoPluginsToday.exe in \Windows\Startup. Name this shortcut ZzzNoPluginsToday, so that it is last in the list of shortcuts to be launched.
4) Start a registry editor, and go to HKLM\init. Look for keys named LaunchXX. You'll want to create a new String key named LaunchYY, where YY is a bigger number than any of the XX you found. I created Launch99. The value for LaunchYY is the exact location of NoPluginsToday.exe (e.g. \Storage\NoPluginsToday\NoPluginsToday.exe) you looked up earlier.
Now you're set! Do a soft reset, and see your Bluetooth icon again! You'll notice your startup time may be a little longer.
How does it work?
The BT icon disappears because of a timeout issue when loading plugins.
We solve this by using NoPluginsToday, which switches all Today plugins off, remembers the settings, and reactivates them the next time it is executed.
By calling NoPluginsToday twice, once via the registry (early) and then again via \Windows\Startup (late), we "postpone" the loading of Today plugins until after the BT icon has been activated. That's your longer startup time for you.
Hope this helps!
cheers,
sheggario
Thanks for the tip, will try it out.
Been running PocketPlus 2.x on my Qtek S100 since the day I got it and no problems with the BT icon so far.
Same here .. PPlus2.5 on a Qtek s100 since they started to deliver them in Sweden..
Np at all ..
Be sure U run latest build..
Maybe its the rom in our qteks that makes it work... ??
Carlis
running Pocket Plus 2.5 since a few days.
no problem at all with BT icon.
Just missing Storage Card icon on Today screen.
Changed register with regedit (as posted on the Pocket Plus 2.2 thread) and now i have my storage card icon on the desktop.
can you post the link for the thread you mentioned. TIA
Here you go...
http://forum.xda-developers.com/viewtopic.php?p=68780#68780
thanks
I manage to install tje Spb Wireless Monitor, and set up the tariff for my carrier. When I check the stats for the used amount of data everything seems to work flawlessly for a minute. Then suddenly the program hangs and the only way to use the top bar is to soft reset the device.
Is there any substitueprogram to monitor the datausage for the HD??
No one???? (BUMP!)
I would suggest searching Google using the following seach string :
"pocket pc gprs monitor -spb"
That should display 3 or 4 different options.
jouh said:
Is there any substitueprogram to monitor the datausage for the HD??
Click to expand...
Click to collapse
I use GPRS Traffic Monitor. Works fine on the HD. http://www.smartphone.net/software_detail.asp?id=1353
if you use GPRS monitor from SPB you have to have access to a keyboard to cycle through the drop down menu to select the connection you wise to monitor. which means a bluetooth keyboard, or using MY MOBILER with active sync on your pc.
Nevermind, a new version of Spb Wireless Monitor just arrived, and it seems to work without any flaws.
Great app!!!
Works flawlessly on HD
Hi,
I dont have sprint service anymore and cannot call them to fix problems.
I did however upgrade (Flash) to the new Windows Mobile 6.1 using the one provided by Sprint and HTC from there website;
_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship
It went well, and now my HTC 6800 (Sprint Mogul) states the following on the "about" page in the phone.
WM 6.1 Pro
CE OS 5.2.19208 (Build 19208.1.0.1) 2007 MS Corp.
Now for my PROBLEMS!
1) Wifi wont work.
Actually more specifically IE mobile doesn't work. It still tries to connect to the sprint network (I had the SERO Plan) using the cellular connection (which I dont have anymore). I tried to change the advanced settings to make all Internet programs to use the wireless connection, BUT THE WIRELESS CONECTION IS NOT LISTED AS A OPTION IN THE ADVANCED SETTINGS or any network settings! The wifi in my phone connects properly to my home network though, and I tried without any wifi mac filtering or wifi encryption, and still IE mobile wont connect.
How do I fix this? Is there an app that will auto set all the correct reg settings and everything?
I want to the use the Mogul as a Internet downloader to download Usenet binaries and if possible megaupload links (a more greener option that having the desktop on). Anyone know of any programs that can do this on windows mobile? I was hoping to use NZBmobile for usenet. Dont know of any rapidshare or megaupload downloader for the the mobile though (Like jdownloader for the desktops).
2) Sprint Bloat software and features. Basically is there a version of windows that is just the OS without the bloat from companies? Will WM 6.5 be too big for the HTC to handle? I saw this on the net
http://forum.ppcgeeks.com/showthread.php?t=67673
Will it be too much for the mogul with the tiny memory on this thing?
3) any 3rd party GPS software that dont require a Net connection and can use preloaded maps? I have 8 GB card.
Thanks to all those who keep the site alive!
Install DCD 3.3.4 or 4.1.2. You dont need the carrier cab and then use something like garmin xt.
drewcam888 said:
Install DCD 3.3.4 or 4.1.2. You dont need the carrier cab and then use something like garmin xt.
Click to expand...
Click to collapse
Hey thanks for the reply drewcam888!
See I'm a bit new to mobile moding hacking. You couldn't trouble yourself to provide some links that show me how to get my wifi working could you? That really is my main problem now
drewcam888 said:
Install DCD 3.3.4 or 4.1.2. You dont need the carrier cab and then use something like garmin xt.
Click to expand...
Click to collapse
I have been wanting to do some mods and couldn't find what the difference is between 3.3.4 and 4.1.2
Will you explain?
Thanks
spl2.4 rom 3.3.4 radio .50 With no customization as of yet
Hi,
I am learning to cook for legacy device HTC Prophet. I want to have my own base ROM, so I started with official WM 6.1 ROM from Kaiser (19214) and Elfin (19772). The OEM/Drivers was derived from the last official WM5 AKU 2.2 from Qtek S200.
Thanks to the wonderful community here, I was able to successfully port the XIP over and get my 1st booter. Everything seemed to work OK, bluetooth, GSM data/phone, Wifi, IR etc.
The only issue I have is Windows Live won't connect. I tried other SW, and they were OK with both EDGE data and Wifi (IE, SJPhone, OperaMini native, Jbed with OperaMini J2ME, PocketOutlook with Yahoo! emails etc.)
This happens with both donor ROMs, and it happens with both the Windows Live comes with the donor ROMs, or the CAB I downloaded from MS website. (to rule out RGU related porting issue.) Marketplace for WM6.1 won't connect, too.
I had tried searching for solution and there seemed to be similiar issue, but I wasn't able to get a solid solution.
I use BuildOS/PKGTool-based toolchain in my own commandline-based kitchen.