Database Users

I cant find my "Running Programs"

I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language

Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V

That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.

Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?

My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.

What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V

@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.

I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit

ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...

THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.

dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.

@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...

So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx

another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx

Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN

@Speedn
thx for the suggestion. it's very helpful.

@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk

@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?

[SOLVED!] Any Language of WM5 on any Athena!

Hi guys, I just wanted to let you know that I have managed to translate 99% of all the WM5 interface to English or almost any language. The secret has been found long time ago by our friend Asukal: http://asukal.net/blog/
Some things like the battery panel, the soft keys on the Communication Manager are missing and others are not translated, maybe somebody can tell us how can we complete this work on the Athena.
Instructions:
1) Install ENG_mui.cab or any other desired language. Don't install ENG_Notifi_COM_BT or any other since they will change some settings.
2) Now you will notice that the Start Menu doesn't exist anymore! So go with the help of your keyboard to the File Explorer, go to /Windows and look for the folder on the Old Language that contains the Start Menu Folder, now rename it to: Start Menu. Then inside rename the folder that contains the Links to your programs to Programs and Create or Rename a Folder called Settings. All of them should be inside /Windows/Start Menu
The original work was made by our friend Asukal. Thank you very much for your hard work! And you can view the original post for the HTC Universal and the Languages Pack at http://forum.xda-developers.com/showthread.php?t=267541&page=2
you can download all the CAB's that Asukal made with a lot of different languages (some of them are not finisihed) at: http://buzzdev.net/components/com_s...les/UI_LNG_SWT_beta_20060629193323_Asukal.rar
Feel free to ask me any question, I will try to do my best!
I will try to post some screen shots later...

bogusiano said:
Hi guys, I just wanted to let you know that I have managed to translate 99% of all the WM5 interface to English or almost any language. The secret has been found long time ago by our friend Asukal: http://asukal.net/blog/
Some things like the battery panel, the soft keys on the Communication Manager are missing and others are not translated, maybe somebody can tell us how can we complete this work on the Athena.
Instructions:
1) Install ENG_mui.cab or any other desired language. Don't install ENG_Notifi_COM_BT or any other since they will change some settings.
2) Now you will notice that the Start Menu doesn't exist anymore! So go with the help of your keyboard to the File Explorer, go to /Windows and look for the folder on the Old Language that contains the Start Menu Folder, now rename it to: Start Menu. Then inside rename the folder that contains the Links to your programs to Programs and Create or Rename a Folder called Settings. All of them should be inside /Windows/Start Menu
The original work was made by our friend Asukal. Thank you very much for your hard work! And you can view the original post for the HTC Universal and the Languages Pack at http://forum.xda-developers.com/showthread.php?t=267541&page=2
you can download all the CAB's that Asukal made with a lot of different languages (some of them are not finisihed) at: http://buzzdev.net/components/com_s...les/UI_LNG_SWT_beta_20060629193323_Asukal.rar
Feel free to ask me any question, I will try to do my best!
I will try to post some screen shots later...
Click to expand...
Click to collapse
Thank you so much for sharing this information with us, good news !

Camera stopped working
The tweak works nice but camera application could not start. Will check further later. Meanwhile I have restored backup

I solved this by replacing /Windows/Camera.exe with one of the Camera.exe.* which size is 404 KBytes. Sorry but I can't remember the exact name.
victoradjei said:
The tweak works nice but camera application could not start. Will check further later. Meanwhile I have restored backup
Click to expand...
Click to collapse

bogusiano said:
I solved this by replacing /Windows/Camera.exe with one of the Camera.exe.* which size is 404 KBytes. Sorry but I can't remember the exact name.
Click to expand...
Click to collapse
where did you get the camera files from?

I got them from my /Windows directory they have been renamed by Asukal's translator. They have the extension: *.0404.mui
So the original file of Camera.exe (the one in Chinnese) has been renamed to Camera.exe.0404.mui, so once Asukal's CAB has been installed, rename Camera.exed to Camera.exe.old and rename Camera.exe.0404.mui to Camera.exe
In fact once you rename the working Camera.exe you will find a different Icon, like more "fashion". Hahaha!
faisal.husain said:
where did you get the camera files from?
Click to expand...
Click to collapse

Camera working now
I have the camera working now
I followed the instructions above, but before the procedure I created a folder on the storage card and copied all the file in the windows folder named camera for preservation
NB: I INSTALLED THE TWO CABS TO THE STORAGE CARD
ALL COPYING AND RE-NAMING WAS DONE WITH TOTAL COMMANDER
1. Ran the Language switcher cab and do a soft re-set.
2. May not be needed, but I started the switcher application and changed the language to English. Nothing changed of course
3. Installed the English mui and clicked ok for reset.
4. Copied all the camera files (4 of them, counting in Camera.exe.0413) to the Windows folder of device
5. Copied all content of the Windows sub-folders Start Menu and Programs from the old language Dutch in my case, to the new English folders.
6. Did same as in 5. for all the folders I wanted to re-name which would not take the new name
7.Camera works as normal, but I did not see the Microdrive to select in the initial settings. I believe that can be sorted with reg-edit or something else, but that is not important for me at the moment. Have not tested the front camera etc. I need to go and have a meal.
Am continueing to re-name the folders and checking the functions as I go along. Happy tweaking to all of you! Many thanks to Bogusiano and Wu.
Cheers

Very good! I am happy for you! I think this the closest we can get until a WWE ROM for the Dopod U1000 is released, for me at least, this is enough to enjoy my device meanwhile!
victoradjei said:
I have the camera working now
I followed the instructions above, but before the procedure I created a folder on the storage card and copied all the file in the windows folder named camera for preservation
NB: I INSTALLED THE TWO CABS TO THE STORAGE CARD
ALL COPYING AND RE-NAMING WAS DONE WITH TOTAL COMMANDER
1. Ran the Language switcher cab and do a soft re-set.
2. May not be needed, but I started the switcher application and changed the language to English. Nothing changed of course
3. Installed the English mui and clicked ok for reset.
4. Copied all the camera files (4 of them, counting in Camera.exe.0413) to the Windows folder of device
5. Copied all content of the Windows sub-folders Start Menu and Programs from the old language Dutch in my case, to the new English folders.
6. Did same as in 5. for all the folders I wanted to re-name which would not take the new name
7.Camera works as normal, but I did not see the Microdrive to select in the initial settings. I believe that can be sorted with reg-edit or something else, but that is not important for me at the moment. Have not tested the front camera etc. I need to go and have a meal.
Am continueing to re-name the folders and checking the functions as I go along. Happy tweaking to all of you! Many thanks to Bogusiano and Wu.
Cheers
Click to expand...
Click to collapse

bogusiano said:
I got them from my /Windows directory they have been renamed by Asukal's translator. They have the extension: *.0404.mui
So the original file of Camera.exe (the one in Chinnese) has been renamed to Camera.exe.0404.mui, so once Asukal's CAB has been installed, rename Camera.exed to Camera.exe.old and rename Camera.exe.0404.mui to Camera.exe
In fact once you rename the working Camera.exe you will find a different Icon, like more "fashion". Hahaha!
Click to expand...
Click to collapse
thanks M8 works a treat

I have WM 5 chinese edition, I installed the englsh mui, after that, the when i create a new sms, the sms application hangs. Therefore i am unable to create sms nor open smses.
Please help
thanks

How to replace my Ext_Rom with another one!!!

Hi Guys
Is there anybody who can guide me if it is possible to replace the Ext_Rom of a WM6 with WM5 or not?!!!
Actually I had a problem with my Ext_Rom...(There's a CLEARVUE...a default program for Reading PDF files which I hate it,but I can't prevent it of being installed while costumization of WM5 ) So I wondered If I can change My Ext_Rom with the one whcih has not Clearvue inside?
If yes,then how???
Thanks

Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.

levenum said:
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
Click to expand...
Click to collapse
Hi Levenum
It's really great to have someone to help you,finally.Thanks a lot,man .Actually I know how to un-hide the Ext_Rom,but the problem is that I can't find the cab that is installing this damn Clearvue program
I'm looking for someone who guide me which Cab is responsible for that(Gives me the name of the cab.file)...or....Any hero who guide me is it possible for me to change my current Ext_Rom with the another one that is not included that damn CLEARVUE???!!!
Thank you again for helping

Heloooooooooooooo
Isn't there anybody who direct me (and many others who have got the similar problem) by just saying how we can get rid of CLEARVUE in the Ext_Rom or at least replacing it with ACROBAR READER?
I already know how to un-hide AND Unlock the extended rom...
I need only the name of the cab file (which installs CLEARVUE),...nothing more...

It's NOT installed in the ExtROM, it's installed in the "base"ROM.

Black-Rose said:
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Click to expand...
Click to collapse
Hi Black Rose
I don't care where this damn software is,and I'm not gonna debate you over it...You just tell me what s the name of the cab.file...And if you are so sure about the location,so tell me also the place of it(Base or Ext-Rom?? )
Thanks anyway

I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.

Putra said:
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Click to expand...
Click to collapse
Hi Putra
Are you sure it's not in the Ext_Rom?Because after a hard reset,whenever I prevent the Ext_Rom of customizing my device (Stop customization),I don't have the CLEARVUE installed on my mobile.
This is why I think it must be somewhere in Ext_Rom.Even some excerpts told me that I have to replace my Ext-Rom with the one which doesn't have CLEARVUE...But he didn't tell me exactly how I can find such a extended Rom and how I can do the replacement...I also needed to know if the replacement may damage the Original Rom of my device or not?
Thanks for helping me, anyway and I would be more appreciated if you help me a little more in that.

Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...

you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom

Putra said:
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
Click to expand...
Click to collapse
Hi again Putra
Thanks again for trying to help me solving this slight problem.You are right About the space that CLEARVUE takes,but I don't want to see in the list of my programs...I want to get rid of it thoroghly...So pleeeeeeeeeeeaseee help meeeeeeeee..... And show me the way to completely erase it from my device!!!!!!!!!

Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
HI Chopin
Thanks a lot for helping me to solve this problem,but wou,d you pease elaborate a little bit more...After all,I'm a newbie!!!!!
Just tell me what's this WINIMAGE and also tell me if I would be able to find the cab file of CLEARVUE within my Ext_Rom to erase it or not?!?!
Thanks again

winimage to use with extension.nb, as anewbie let forget how to use this one. if you need to kow, use search you;ll find a lot about how to use this one.
just look in the folder and remove it, or just edit the file Config.txt and remove the cab you don;t wanna install, it is so easy and don't need any clarification.
tell me what ROM do you use

Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
OFF TOPIC: Hi Chopin, can you explain how I can edit the contents of the extrom on WM6?

edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it

Chopin said:
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Click to expand...
Click to collapse
Oops, I meant how do I unlock and unhide the extrom in WM6. What prog do I use?
The last time I tried using WM5 tools on PdaViet 01, it didn't work. I have not tried again. I'm on Gullum v6, btw.

if this is what you want here is the files for unlock, and please ask me more if this was not what u needed

Ok, thanx. I'll try them...

Stop off-topics...let's talk about main topic
Hi dear friends
I noticed that we have been a little been off-topic,so I wanted to recall that we are here to help each other to find a way for "HOW WE CAN DELETE ANY CAB(In my case...CLEARVUE's cab file)INSIDE THE EXT_ROM OR CHANGE IT WITH ANOTHER CAB(Again in my case changing default CLEARVUE with ADOBE ACROBAT)?????
My friends
I even checked the Config.text file within my Ext_Rom,but unfortunately even there was no name and trace of CLEARVUE?!?!!??But I' sure it must be there...since when I stop my device of being costumized after a hard reset,I never see this CLEARVUE in my programs...So that means it must be somewhere in Ext-Rom..Somebody...Some hero....some know-all tell me where?????And under what name?!?!??!??!??!?!?

please, we already answer this question, to help you more, what ROM do you use?

Installing themes/manila files without using TF3D Config on a 1.93 o2 ROM

Hi All
First of all I am new to all of this but have spent the last week trying to figure out what to do but failing badly - therefore apologies to you all if my question could be easily found through a google search ...., but I have failed to find it
So at the heading says - how do I install a theme/manila files onto my Ignito without using TF3D Config - I have tried copying them across to the windows directory but still cannot see them listed under the Today settings.
I am using TF3D, on a 1.93 rom on a O2 UK tariff
Fingers crossed someone will be able to help me in simple - idiot proof - instructions
Thanks all
Jean

Ermmm - in light of the fact 77 people have looked at this but not replied does that mean ....
a. Its a really stupid question not worthy of a reply
or
b. No one knows the answer

a lot of people use tf3d config on 1.93 roms with no known
problems.give it a try.you can always take it off again and
return to your stock rom.

Hi i have a 1.93 rom which had the o2 theme, i installed the original black theme on it using tf3d config and ive had no problems.

fleabane said:
Hi All
First of all I am new to all of this but have spent the last week trying to figure out what to do but failing badly - therefore apologies to you all if my question could be easily found through a google search ...., but I have failed to find it
So at the heading says - how do I install a theme/manila files onto my Ignito without using TF3D Config - I have tried copying them across to the windows directory but still cannot see them listed under the Today settings.
I am using TF3D, on a 1.93 rom on a O2 UK tariff
Fingers crossed someone will be able to help me in simple - idiot proof - instructions
Thanks all
Jean
Click to expand...
Click to collapse
use total commander to copy and paste the files into the windows directory!

Is there actually a reason why you're trying to do this? TF3D Config is a quick and easy method for changing your theme so to try and accomplish this manually seems needlessly complex. Which, I'd guess, is probably why no one's answered your question; it's likely that no one has ever tried to do it manually as TF3D Config does it all for you.
For the record I've got the stock 1.93 ROM on O2 and I've managed to change theme with TF3D Config without any problems at all. My girlfriend's done the same with her stock 1.93 Vodafone ROM.

Hi All
Thanks so much - the problem I am having is that I can't find any themes within the TF3D config programme - so for example - it asks for a path to the file containing the theme - I highlight the theme location but it then does'nt load
Am I being really dumb!!
Thanks again all
Jean

fleabane said:
Hi All
Thanks so much - the problem I am having is that I can't find any themes within the TF3D config programme - so for example - it asks for a path to the file containing the theme - I highlight the theme location but it then does'nt load
Am I being really dumb!!
Thanks again all
Jean
Click to expand...
Click to collapse
loool OMG select the folder where your themes are located!

You can't select TF3D themes in the Today settings. A WM6 theme (.tsk files) yes, but no Touchflo.. You'll have to either use TF3DConfig> Create a folder called 'themes' (without quotes) in your storage card and put the xxx.theme files in there. Use tf3dconfig, press 'path', doubble click storage card, highlight themes, and press 'ok'. There has to be only .theme files in there, no folders or zip files, they don't work...
Or if you want to copy files to the windows directory, the method is to extract all the manila-files from a theme. Copy and overwrite all the manila files to the windows folder. Folders, zip-files or .theme-files do not work. Only manila files. I wouldn't recommend this one, but you gotta do what you gotta do..

djind said:
You can't select TF3D themes in the Today settings. A WM6 theme (.tsk files) yes, but no Touchflo.. You'll have to either use TF3DConfig> Create a folder called 'themes' (without quotes) in your storage card and put the xxx.theme files in there. Use tf3dconfig, press 'path', doubble click storage card, highlight themes, and press 'ok'. There has to be only .theme files in there, no folders or zip files, they don't work...
Or if you want to copy files to the windows directory, the method is to extract all the manila-files from a theme. Copy and overwrite all the manila files to the windows folder. Folders, zip-files or .theme-files do not work. Only manila files. I wouldn't recommend this one, but you gotta do what you gotta do..
Click to expand...
Click to collapse
Thanks again - I've done exactly as you say - and in fact that's what I have been doing - yet no theme is available within TF3D - I'm trying to install a manila theme called Black n Blue - I get a warning saying I must have 20mb free - which I have - so at a complete loss as to the problem.
J

Hmm this is weird.. what ROM do you have? Is it stock? And what version of tf3dconfig are you using?

djind said:
Hmm this is weird.. what ROM do you have? Is it stock? And what version of tf3dconfig are you using?
Click to expand...
Click to collapse
Rom: 1.93.206.3 wme - Original o2 VERSION
TF3Dconfig: 0.6.7
It's very frsutrating as the process should be simple - yet installing a manila theme in anyway seems impossible - I can change the picture background via Flo and of course have a WM theme if I turn off Touch Flo - just not install a theme that intergrates with TFlo - thanks for the time and help

Yes I can imagine. But on the thread about tf3d config, it says 'Please do not install a Theme on a 1.93 ROM!' Maybe he's referring to stock roms? I also have a 1.93 rom, but it works without any hassle. You are not willing to update to a custom rom?
Have you tried to copy all the manila files to your windows folder? Use total commander.. original explorer does not work..

I think that's what I'm going to have to do - just less hassle if I can get away without replacing the rom - never mind it was worth a try - the weird thing is even copying across to the windows folder- via ActiveSyn - also does'nt work - so a bit stumped
Thanks for all the help though

You would have to use Total Commander to to copy files from your 4gb storage card to your windows folder. It doesn't work with activesync or explorer..

Ahh okay thats good to know -off to try!!!!

Perfect - fiddly - but worked a treat - it was trying to copy across via Active Syn that was the issue - hugely appreciated thank you

It's worth noting that this can't be an issue with stock ROMs because both my girlfriend and I have successfully updated our TF3D themes using TF3D Config and we both have stock 1.93 ROMs.
Not that that helps you out at all, but at least people reading this will know it is perfectly possible to do this using a stock ROM.

Medulla said:
It's worth noting that this can't be an issue with stock ROMs because both my girlfriend and I have successfully updated our TF3D themes using TF3D Config and we both have stock 1.93 ROMs.
Not that that helps you out at all, but at least people reading this will know it is perfectly possible to do this using a stock ROM.
Click to expand...
Click to collapse
Same here, i have tried many themes on the stock o2 ROM with the TF3D config with no issues.

I can't believe so many people out there don't realize what the problem is. The aforementioned "Black and Blue" theme (and many others) is NOT a .theme file, so the TF3D Config application CANNOT be used to apply it. It is instead just a bunch of manila files that need to be copied into the Windows directory (with Total Commander from the sound of it). I have had the same problem with the same theme.
Are we being dumb in that there is a simple way to create the .theme file? From a collection of manila files?

TF3D links customization

I happily own a HD since Thursday after a Diamond and a Pro: HD is far better!!
I tried the utility posted in the diamond forum to change the default links to time and calendar, it does not work, after the patch the TF loops without starting.
Did anyone try already?

SSMAPA
Originally Posted by Medic View Post
Hey guys if your like me your missing using PocketInformant. I found the solution to remap the calendar in TouchFlo to PI. Here are the steps needed.
Download app from here http://forum.xda-developers.com/showthread.php?t=407777
This seems to be a very great tool but I've only experimented with remapping my calendar.
Disable TF3D
Run SSMaPa.exe from phone
Check Extended Init and press Init
Click on setting and highlight replace calendar
Check "patch enabled"
Under new program type in the path of pocketinformant
-In my case it was /Program Files/WebIS/PocketInformant/PocketInformant.exe
Delete arguments
Type in directory where exe file found
-In my case it was /Program Files/WebIS/PocketInformant/
Click save
Click deploy tab and press deploy patch
Next you will need to copu these 2 files from your TP windows directory using activesync and resco explorer or a similar program to a folder on your PC.
_mpmantoday.dll and _mpman.exe
Next download file editor from here http://forum.xda-developers.com/show....php?p=2721128
Unzip folder to extract files
Once unzipped open Unsign folder and drag your two extracted files one by one over Unsigner.exe. Very quickly a msdos window will open up and it will seem as if nothing has happened but don't worry the files have been modified at this point.
Now just overwrite the 2 files with the same 2 files in your TP windows directory.
Go into your settings and reenable TF3D and you should hopefully have remapped the original calendar app with PocketInformant.
All donations, thanks, beer, coffee, women, kudos should go to Svenso and Schreda over at xda since this was done using their apps and help. I'm not worthy and only a messenger of my good fortune.
Edit: Just in case I've confused people, this is the post that made it all happen http://forum.xda-developers.com/show...&postcount=208

rinobed said:
I happily own a HD since Thursday after a Diamond and a Pro: HD is far better!!
I tried the utility posted in the diamond forum to change the default links to time and calendar, it does not work, after the patch the TF loops without starting.
Did anyone try already?
Click to expand...
Click to collapse
the same thing happened to me, still cant get it to work

Don't forget to unsign
Don't forget to unsign the changed files with the unsign.exe of the file editor tool - otherwise TF3D won't start!!!
http://forum.xda-developers.com/showthread.php?p=2721128

thanx for the help but i cannot seem to find these two files
"_mpmantoday.dll and _mpman.exe"
you said they are in the TP windows directory
what do you mean by TP?
thanx

Iv figured it out, thanx

Hi xdaman85
Where did you find _mpman.exe and mpmantoday.dll?
Are these hidden files?
Many thanks for your help
punta