The programmers of www.pdamobiz.com in Thailand have successfully unlocked the CID for HTC Prophet SPL 2.xx. More information is available at:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437&PN=1&TPN=1
Wow, that's a very good news indeed
Now I just have to find an Orange France M600 rom to test if it work
I'll test with the Jamin one also...
If someone can upload the M600 french rom, i would be very grateful, thanks!!
Does anyone succefully download the unlock program? the connexion is very very slow on their server (I'm downloading in Bytes/sec :shock: instead MBytes)...
If yes, it would be nice to upload it on the ftp server, thanks!!
cedrick said:
Does anyone succefully download the unlock program? the connexion is very very slow on their server (I'm downloading in Bytes/sec :shock: instead MBytes)...
If yes, it would be nice to upload it on the ftp server, thanks!!
Click to expand...
Click to collapse
Thanks to someone that uploaded the file. It's here:
ftp://xda:[email protected]/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar
Actually it was there ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar :wink:
Not sure what happenned to the Prophet folder on the ftp, I though there were more files inside yesterday :roll:
Thanks a lot anyway
Im probably missing something here, but isnt it enough just using Machinagod great No ID crack when upgrading a ROM?
Just copy it to the nbf files and run it, works like a charm.
So, what is the difference with this application?
I don't know the app you're talking about, but we're talking here about downgrading, not upgrading a rom...
Moreover, does your application remove CID on prophet with SPL 2.xx ?
well, should have tested that before speaking...
doesn't work for me, once run the downgrading program, I soft reset but the device stay blocked on splah and I can't connect back to active sync to run the unlock program... too bad, that seemed to be a good way to downgrade rom :?
...great work! just used it on my qtek s200 that i've accidently flashed with the latest o2 germany rom without cid-unlocking before. now i can really put any rom on it
thanks and cheers, lutz
did i work? what happen when you soft reset after running the downgrade tool?
thx !
everything worked as it should, no idea why it didn't work for you...
cheers, lutz
Ok thanks,
BTW, ignore my PM didn't though you'd reply so fast :wink:
do a hardreset and pray that you get it connected to active sync, buddy...
as said above, it worked exactly as they've said it will. i have no idea what went wrong for you so my help is poor...
cheers, lutz
Actually I tried various time... I'm on the last Dopod rom, i started as said, then when I reboot, the device is stuck on dopod splash screen...
So I have to go into the boot loader in order to reflash the dopod rom I have... at least I can do that and keep my S200 working
Maybe this doesn't work with the last Dopod rom, but at least it worked for others
we need a Thai to Eng. translation to understand the problem
Unfortunately my device can not continue with second step. After I softreset it; the device freezes. Neither hardresetting, nor putting in bootloader and continuing with hard or soft reset helps. I reflashed the latest Dopod ROM and continued to use it.
I can not read Thai language but from the original discussion (not english but in Thai language) I see that a number of people are having the same problem. I also understand that the suggested solution works for some others.
The english version is not a full translation of the original discussion; translation of a lot of answers are missing.
We need the help of our Thai friends to understand what is going on.
I guess that it works on certain rom version, if you've the dopod one like I had, then it confirm that this method is useless with the last dopod rom...
But we have confirmation it work with other roms... maybe it's not really working on SPL 2... roms :?
I took a look on the Thai version, now it's clear that it doesn't work on the last dopod rom SPL 2.15 !!!!!!!
cedrick - Sorry you have failed to CID-unlock your Prophet and congratulations to lutzh that has succeeded.
From the Thai version of this utility, many people could unlock their devices but some did fail to do that. Not sure only the SPL 2.15 or not that couldn't be unlocked but at least 2 people claimed that their devices are SPL 2.15.
The website programmers are still trying to investigate and find the solution to help people who failed. Please hang on. Good luck!
@cedrick:
Yeah my SPL is 2.15
@Khuanchai:
Thank you for information. Hope to hear better news.
Cheers.
No problems about the failure, that's already nice to see tools like that that can help a bunch of people.
Now I hope it will also work on the dopod rom as I really liked it and I would like to update my prophet with this rom. But I prefer to wait until there's a way to get back to whatever rom :wink:
Hello,
i want to upgrade to
PDAMobiz_Prophet_WM5AKU3.2_v3231
Prophet_WM5AKU3.2_v3221_lvsw_edition
but after upgrading it always freezes at Splash Screen. Then i tried the following:
Dopod818ProRom_SPL 2.xx.0001_stopatbootloaderfix
but still same problem.
I have IPL 2.15.0001, SPL 2.20.0001.
Where is the problem?
You already did a hardreset after installing? And did you use the version which is good for a G4 so you didn't install a G3 rom on a G4?
Never had this happening myself, although I've read on a few occasions that when people tried to install it again it started to work although I'm not sure this could make things worse.
Can you still get into the bootloader? Then you could try and install a more 'normal' rom again to get your device working again and then try to install the AKU 3.2 version again.
Although I'm not 100% what rom you should be using then, I think the latest roms with the new aku in it use the latest qtek rom which can be found at the upgrading part of the forums.
Hopefully someone around here had the same problem and can enlighten you how to get around it
Oh and perhaps a better place for this topic would have been the upgrading part of the forums?
thank you. its working again. the pdamobiz and the jester versions work. pdamobiz was unstable. jester is stable but only aku 2.2...
whats the best rom for xda neo G4?
Hello there!
First of all, please excuse my terrible english ... but I hope you can help me!
I unlocked my Athena reffering to this link ...
http://forum.xda-developers.com/showthread.php?t=315831
... and everything went well!
I installed this rom ...
http://forum.xda-developers.com/showthread.php?t=346221
.. and everthing was really awesome !
Then I noticed that the keyboard layout was qwerty .. and as I am a german I´d like to have qwertz ans so I installed this ROM:
http://forum.xda-developers.com/showthread.php?t=399938
Unfortunatedly I´ve chosen the wrong one (strange order of links) because after installing the rom The Device comes up with the warning descriped in the post ... and what´s worst and actually my Problem:
The device resets each time during the "customization", reboots and tries to do the custom again.
It resets even when I try to install another rom ... no tricolor screen or anything!
So the device is now running an unusable OS and I don´t know how to install a new one!
HELP ... I need somebody!
... solved!
found a solution here:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
.. or at least how to install a new rom!
http://forum.xda-developers.com/showthread.php?t=397518
you can find the links to the ATHENA ROM.
Other German ATHENA users could provide some help to set the Kb
Carefully chose the SPL version, 1.2 since you install AP4, after AP4 you will have the newly partitioned ATHENA, with SPL 3.5 (no way to flash any original HTC ROM or an 1.2 SPL ROM, a tool to revert it back is in developing stage)
i flashed my artemis with official htc wm6 rom one night then with yue 11.1 wm6 wwe
everthing seems to be fine but i noticed that there is no change in
splash screen that appears first and even radio remains same after yue rom upgrade
then one more shocking thing i found out that i can't call and i m not reachable when somebody else tried to call me.
i tried upgrading the radio to 3.21 then also no improvement
flashed again with artemis 4.01 no use. no change in splash screen and radio also.
now i m with yue 11.3 rom everything is working but phone is searching for signals.
also tried another sim card also
plz suggest me some solution
i think you have to SIM unlock your phone... maybe this will help
http://wiki.xda-developers.com/index.php?pagename=Artemis_SimUnlock
and for the YuE.. all Yue ROMS seems that don't have splash screen and radio .. so nothing change in these.. and you can try to flash another radio.
hi all,
is there a know issue with HTC Artemis regarding WM6.1 ROM (Artemis_Touch_4.02_Full_with_4_sided_cube)?
every time I have to restart my HTC Artemis at least 3 times per day.
any ideas or commenst are welcome!
ForumKa
ive been using that rom for a while now on my xda orbit and ive had no such issues
Yes, me too. I move back to v4.01
No issues with me too. This artemis touch baby is working just fine.
maybe you should try hard reset
take backup and hard reset the phone
what is cube how it works ..can any 1 help me
Try to reflash. Sometimes a few files don't transfer the right way at first flashing. Try to flash ones again, I've never had problems with touch 4.02 (with or without cube) with radio 3.21.90. It's really stable!
Good luck.
I have the same... did you found a sollution?
I uses P3300 and the same ROM.
thanx thanx