FPSEce help - 8525, TyTN, MDA Vario II, JasJam General

maybe not the best place to be posting this, but the FPSEce forum is down, and the domain expired so maybe not coming back too quickly
i used FPSEce on my old HTC magician for over a year without too much difficulty (except for the first few days figuring out how to rip things properly)
i've just upgraded to a hermes and i cannot get it to work
at first it was crashing (by which i mean, closing down the emulator and returning to the today screen) even if i started without an ISO, i.e. just the PS startup screen. this turned out to be a CPU issue, if i set it to "ARM v4" instead of "v5" it's ok. but if i try and start my FF7 ISO it crashes still.
i know it's a good rip because i've got save games with many many hours on them from my old HTC magician.
i'm running from a cold start with approx 30mb free RAM (more than i used to get on the magician). got latest radio update and black satin WM6 rom (about to try a different rom to see if that makes a difference)
a few posts on here would suggest that other people do use FPSEce on the hermes with WM5 & 6, so i can't see it's a compatibility issue
any ideas at all would be appreciated
thanks in advance

solved - replaced the rom with the latest schaps and FPSEce works fine now

Related

really really dodgey xda exec

Sorry if guys are tired of these threads about the dodgey operations of the xda exec, but mine really got to me tonight.
I only had 3 software installed on mine, pocket informant rev 3, spb diary, spb pocket plus. It was running ok with these 3 software, abit slower than i expected but ok. However i never thought it was totally stable, sometimes it would jus freeze, it would happen to me quite a few times a day, and as mentioned by some other users, it would take around 3 or 4 soft resets to get it back up. I have ordered a replacement from o2 and they said they going to send one but it might take a while as there is none in stock!
I thought id play around with this one for abit, try and get the most efficient set up going so i could do it on my new one. I read a post about Lakeridge WisBar advance and thought id give it a try. I installed and then it froze, i thought a soft reset would fix, but no, i must have tried to soft reset it over 15 times and the cloest i got to the today screen was the sim card pin screen which was half covered by the o2 boot screen so i couldnt even enter the pin. Then i thought o well going to have to do a hard reset, so i tried it and it didnt work, i did the hard reset and it froze at the o2 boot screen. I did it again and it did work. But how dodgy is this pda man!
Install it in Corporate mode and just install needed cabs only, especially the one with connection. Use if for a few days to see if the problems persist, the crap 02 interface may well be one of the main problems.
Mine works fine, this is a great device but also need a lot of tweaks to work well, if you want a good "out of the box" experience then this isn't the kind of phone for you.
BTW, don't install Pocket Plus, it will slow down your Exec as hell.
As above but consider not using the Spb software.
It caused all sorts of memory leaks/crashing on mine over the course of about 3 days of testing.
In addition it also rather annoyingly consistently failed to work right when the phone was resumed after a long delay ie over night.
My dopod 900 running perfectly well and fast even with 5 programs on the background. Guess the way WM5.0 handle the memory usage is different than previous OS did.
Spb pocket plus really slow down my machine, now i'm using my without any task closing utility at all and it runs smoothly.
h,im using dopod 900 for only less then a week.i really find this dopod 900 are much more stable than all xda PDA.
i tot its gonna be the same like xda which always hang or Jam,amazing it work so well.
Dopod900 definitely run way stable compare to Exec or I-mate. I didn't quite face the same problem they mentioned here. Guess O2 and I-mate has mess up their rom after the customization. The other reason could be that Dopod is directly link to HTC so they have the access to the deepest on the programming on this machine.
yep... SPB Pocket Plus causes crashes... :x
Just tried to install the SPB pocket plus 3 on my xda Exec, and after quite a few failed installation attempts -- I should have stopped there -- where for the first time in over a month (when attempting to instasll new s/w) the installation consistently failed. I took a break and decided to have one last go.
This time it did work. During the installation it warned me about installing it on the Storage card: that the card driver has to be initialysed prior to activation of the prog.
The installation finished.
Well after that I tried to open the prog... it didn't work, and the device wasn't responding.
My next step was a soft reset, but it halted in mid-process.
There followed a few attempts again of soft reseting the device - but it kept halting at the same stage...
So for the first time - after testing my device for over a month with many programs - I needed to do a Hard reset :!: :x
This is really annoying! I have read before that SPB is slightly problematic and slows the device down... to put it mildly - I am NOT impressed :!: :!: :!: :evil:
I saw on another thread about Pocket Hack Master for overclocking the Universal. You might want to give it a try.
I also tried SPB Pocket plus, but was dismayed by how slow it made my EXEC. I deleted it off in less than a minute.
jus recieved my new xda exec from o2 this morning. Installed corporate settings and keeping all 3rd party apps off for the mo and see how it runs. Will keep you guys posted.

Memory Leak + ****ty Battery life + Lockups = Getting tired!

I don't know.. ever since I got my brand new O2 Exec I've been getting less and less productive in work. The machine is indeed cool, but only when it works. I'm early adapter but it's been for the past month or so that I'm working for the machine instead of the machine working for me.
Memory leaks are out of this world. Memory is not freed up many times and I end up easily with 3mb of free ram even if no program is on. The battery life is terrible (to say the least) compared to my good old PDA2K (even with it's over 1yrs old battery! it blasts the Exec memory miles away)
Lately, the amount of lockups I am getting is simply unbearable. machine freezes.. sometimes the left soft button's caption (i.e "phone") graphics is seen like a small white box or something(as if all the letter go over each other) and then machine freezes. Something an alert comes up and then machine freezes. I can't trust the machine for business use, for games yes, but not for business.
Please note I don't have many programs running at all, no wisbar or cosmetic stuff like that., no SPB Plus and stuff like that. Just PocketInformant, PocketBreeze, phoneAlarm all of which are must have for me as well as some utils i relay on. I am wondering maybe my ROM is outdated, but I didn't see an update from O2 yet (I don't want to install NO_ID tool and flush other roms than OS own due to warrenty issues)
I have OS2 Exec with following ver:
ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
Protocol version: 42.37.P8
ExtROM version: 1.13.188 WWE
Is there any Official update from O2 to any of these ?
Help is very much appreciated. That's before a 10kg hammer is blaster over the machine in an act of anger.. lol
MOBILER
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
cktlcmd said:
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
Click to expand...
Click to collapse
Thanks man, I highly appreciate your detailed helpful response, but two issues :
1) As I said, I do not want to install the i-mate JJ ROM over the O2 one due to warrenty issues. So I think I would prefer to wait for the official O2 release thought I am starting to loose patience..
2) I also use the MagicButton app on my Exec. It seems very efficient at closing programs and switching tasks with minimal memory footprint. I'll look into the program you mentioned, but I doubt that's the problem. My machine has memory leaks because even when programs are all closed after several hours of use I can get down to 3mb free RAM.
Regards
MOBILER
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
I now keep things simple, using PocketZenPhone for switching profiles ( very nice and simple solution ). Use the O2 web site to keep track of number of txts sent and phone call allowance.
SPBGPRS monitor for the obvious monitoring of GPRS usage.
Using the standard contacts and calender ( does me ok but not as flexible )
And I have just started messing about with Wisbar, No problems as off yet.
Personally I have found all problems with the phone are linked to software incompatabilities.
I am still in warrenty with O2 but have updated to the latest ROM and radio and if for any reason it has to go back I will try and flash back but my way of thinking is that I should be allowed to change to any ROM image I want in the same way as load any software I want.
Dont know if that is of any help at all, just my views on trying the same software. Regardless of how good they are, they caused problems for me so now I dont use them and everything seems to be running ok.
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Running the virgin corporate install o2 ROM with no TSRs. Using PIE and Netfront, and the built in outlook, together with a number of games, has meant that my xda is quite reliable. I am hoping that my 'once every 2-3 days reboot' will be gone once the new xda rom comes out :shock:
I can also recommend memmaid to occasionally clear our broken registry settings.
WM5 has been a painfull experience for the PDA manufacturers. If you think we are having a bad time you should read the stuff about the dell axim x50 upgrade on aximsite. I am hoping that WM5.1 will be a free install for universal users as this will make the os more robust.
On an optimistic note the chipset employed by the universal is well used and very reliable in many applications, the construction is robust, so IMHO it all comes down to software/firmware which we hope will improve.
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
FWIW, I am new to this device, but not to PPC, so I am familiar with minimize/close distinction. My orange SPV M5000 loses about .3MB per program invocation. I shut down programs using either the program's own Exit function (where it exists) or the Memory tab in the settings area. But the memory is slowly eroded. The worst culprit is Activesync to my laptop, that consumes around 5MB that never comes back. After a soft reset there is about 23MB free, this quickly drops to around 18, then steadily drops. Something in the OS is not releasing memory. I have to soft reset to get the memory back (which takes about 3 minutes).
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
Have you tried using the Exec in Corporate mode? It works fine for me
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
It is surprising that after 6/9 months of WM5 availability that we are still having instability problems with major/popular WM5 apps. I only use GSPMagic, Agenda Fusion, MS Reader and Opera. Only GSPMagic and AgendaFusion have been trouble-free.
WM5 was intended for programs to keep running. I know we like to hack our machines to death + sometimes the memory gets too full and you have to kill stuff. But sometimes if you keep MS stuff running, and don't kill it all the time with something like magic button, you find the system runs better.
I have activesync, contacts, outlook and PIE open all the time. I used to kill activesync all the time and I think this caused problems.
Normally my games have proper exit buttons, together with pRSSReader (totally excellent program). For the MS built in programs I tend to leave them running as the OS was designed for this.
Wow I think its pretty clear I ended up with a good unit afterall, either that or o2 really really messed up with your ROMS.
I have to charge my battery every night but thats to be expected with the usage I have. And im running Wisbar Lite, PhoneAlarm, PocketBreeze, and Wisbar Advance Desktop, all no worries, the only time I notice a distinct loss of memory is after player Warring Nations.
I feel for you guys, I think your summing it up that your working on your device as opposed to it working for you says it all.
Thanks for all the responses. You're all great guys!
Please see my responses below to all suggestions:
Darren_Bridgeland said:
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
Click to expand...
Click to collapse
Thanks, but no. I don't use SBSH Ilauncher. I use MagicButton which has a minimum memory footprint
jah said:
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
Click to expand...
Click to collapse
Thanks, I felt I was the only one having problems Anyway:
1) I am always in powersave, still loosing battery power.
2) I just purchased a new SD card yesterday because I thought that may have caused the problems, but it's not it.. same problems.
3) I'll look into spare batteries, thanks for the link
ninja12innotts said:
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
Click to expand...
Click to collapse
I appreciate the reply.
1) I've purchased and used phoneAlarm for about a year straight with my PDA2K and it never failed me any problems. I consider it a must have, and since it ran quite smoothly on my PDA2k I don't see why it should cause the Exec these issues. Further, I did remove it and still exeprienced the same issues, so that's not the problem either.
2) I've used PocketInfromant for 1.5 years now and no problem on my old PDA2K.
colonel said:
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Click to expand...
Click to collapse
Thanks for the reply, I've been using MagicButton for almost as long as I can remember and it never failed me. It worked superb on my PDA2K. Further, I tried removing it for a few days to check how things would work without it. Same lockups, same memory leaks, same mediocre performance, unfortunately (or fortunately) this isn't the problem either.
weasel said:
Have you tried using the Exec in Corporate mode? It works fine for me
Click to expand...
Click to collapse
Sure I actually never ran my Exec in any other mode than the Corporate mode, so I never even experienced the other modes.
jah said:
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
Click to expand...
Click to collapse
Pitty, that's not the issue with my machine as I already did that trick 2 weeks ago.
I just ran memaid to see what running processes do I have and I see to be having the following ones. Note that I have no running programs in the background and no today plugins enabled whasoever, just VoiceCommand I guess is working in the background but that's it. It seems to me that the WM5 core doesn't freeup memory.
Here's what memaid reports
gwes.exe 5.26MB
device.exe 2.83MB
filesys.exe 2.41MB
cprog.exe 2.29MB
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB
connmgr.exe 115.81KB
MemMaid.exe 27.90KB
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB
Nk.exe 0 bytes
the most memory you can clear is about 26-29mbytes. The rest of the running processes need to be there. There is a good thread somewhere on what each process does, will post it if I come across it again.
29mb is disappointing considering there is 64mbyte memory, but thats the way WM5 works.
rgds
I've got a O2 XDA ii (himalaya) and im running wm2005 2.01.64
After a soft reset I have 31.x MB or RAM left, even if I dont run a single program or make a single phone call within say 6hours my RAM is at 21-24MB. This has nothing to do with not correctly closing programs but either a wm2005 leak or in my case a lot of the problem is being pointed at SBSH Ilauncher.
Well here is a comparison just done a soft reset started memaid and my results are in brackets after yours for the ones in common running :-
gwes.exe 5.26MB ( 4.6 MB )
device.exe 2.83MB ( 1.46 MB )
filesys.exe 2.41MB (1.82 MB )
cprog.exe 2.29MB ( 1.46 MB )
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB ( 1.21 MB )
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB ( 315.76 kb )
connmgr.exe 115.81KB ( 115.81 kb )
MemMaid.exe 27.90KB (23.0 kb )
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB (7.9 kb )
Nk.exe 0 bytes ( 0kb )
also I have :-
Wisbaradv2.exe 787.71 kb
sddaemon.exe 67.9 kb
Pimhelper.exe 11.9 kb
Poutlook,exe 3.9 kb
( i have Wisbar, SPBdiary and pocketzenphone open )
going to have a look later tonight to see if anything changes.
ROM Ver. 1.30.76
Radio 1.09.00
ExtRom ver 1.30.164
I had similar problems when I first bought my O2 exec (on Ebay).
I downloaded the latest update from O2 website and re-flash the phone. I used Corporate install. So far it has been solid and I am even using the phone with Goodlink without a problem.
About the same time I bought the phone, I bought a 2G SD card (sandisk) , when I got the card I insalled a few software on this card (TCMP and Total Commander). Everytime I ran those applications, I can see that the phone crawls like a snail and worse it hangs. It even take a long time for me to transfer files from my laptop to the SD card even when I used a SD Card reader.
I replaced the SD card with a 2G MMC+ (Kingston) and I install the same apps. My phone is working as it should be, I can say that I didnt experience any hanging at all and it was never slow as well. I can even upload a ripped DVD movie on the phone faster compared to when I used the SD card. Right now I have one full season of Alias in my MMC+ card.
I have the phone setup to turnoff after a period of time (3 minutes) when there is no activity as opposed to others that they wanted to have the settings uncheck Start>Settings>Power. I also make sure that the backlight is set to a minimun when on battery and I uncheck the part where the phone will not recieve all incoming beam.
So far, my phone has been stable and battery lasts for 3 days.
From personal experience I found wisbar caused issues with the phone not ringing on an incoming call. It would ring for the first call after a soft reset and then stop for any further calls...
The other major issue which could cause delays and slowness is installing to the sd card any apps which ought to be installed to ram. ie: today plugins etc.

RANT: Wizard still faster that Hermes.

Let me just say: I'm not expecting a solution to this - I just want to vent. When I got my Hermes (which I love, of course) I gave my Wizard to my wife (which she loves, of course).
But every time I use her Wizard I notice how much faster it seems. Both units are frequently updated with the latest ROMs and are both now on WM6.. ..but it's so frustrating to see how much 'snappier' the Wizard always seems. Just as an example - pressing the power button makes the Wizard spring into life instantly, whereas the Hermes always has a short pause before it lights up The same goes for dialing and changing tabs in Settings, etc. too.
Oh well. I feel a bit better now I've had a moan.
True, but bring yourself back around by trying to surf with PIE on her's once....
or fire up a 96K music stream and see if TCPMP chokes on her's.....
or tether your laptop and see how well you can surf with it on her wiz...
(hopefully you have 3G coverage where you are)
Oh I know, I know (I get lovely HSPDA most of the time too). But has anyone ever figured out why the Wizard is snappier when Hermes ought to have more powerful hardware?
Something odd goes on when Hermes devices return from powersave. I need to find where that code is too b/c there's some real wonders that can be worked. This internal code does stuff like force portrait mode (a workaround for the magnets in the hermes case that place it in landscape mode), and do some battery power checks (which cause our Hermes not to display the last known battery state). During the execution of this routine, the delay occurs...
The Today screen refresh slowness only occurs when a lot off apps (in particular SPB PP) are installed. I personally think that a Hermes with a clean build is quicker from a response standpoint than a Wizard.
I have PocketBreeze installed - in fact it's the only thing I always install after a clean wipe - and it's the only thing on my Today screen.
If I'm honest, I think I let the fact that there's a delay coming out of power-save totally cloud my judgement. And if it were possible to change that through a hack, I'd be over the moon.
If you and other XDA boffins can crack that one, I'll be happy to make a little contribution for the efforts
Well, I'm coming up to speed on Platform builder after installing it for the ATI patch. This IDE lets me poke around in places I've never poked before (heheheheheh). Unfortunately the tools don't fully work on WM6 yet which is what all my hermes have loaded currently. My 8525 will be freed up soon tho & I'll be able to load a AKU3.3 build and get back to projects like this.
Sleuth255 said:
Well, I'm coming up to speed on Platform builder after installing it for the ATI patch. This IDE lets me poke around in places I've never poked before (heheheheheh). Unfortunately the tools don't fully work on WM6 yet which is what all my hermes have loaded currently. My 8525 will be freed up soon tho & I'll be able to load a AKU3.3 build and get back to projects like this.
Click to expand...
Click to collapse
I would pay for an app that would make the power on time as fast as the Wizard's.

6.1 - touchflo - polaris - games no work?

Been enjoying my polaris for a couple weeks now and decided to put on a few games, but about 75% didn't work (most of the ones I really wanted to play) including, virtual pool, some other pool game, snails, girder and a bunch of others.
Most just crash out straight away, some display black screen and seem to be accepting input but need a reset to get the screen back.
Is this a known issue?
I did try searching, why no responses?
I have similar problem with snails and girders and many ohers, but I'm using uDK R1 ROM + 3D drivers, probably it's because of this in my case. But I will be happy to hear any soluion.
same problem
i've the same problem with my polaris. scummvm does not work. it starts and crashes after a second. i think it could be because of the 3D-drivers.
Not really. With TouchIT 3.6 at least the PDA Mill games worked. They don't do it anymore with Khan 1.21a. Well, I can live with that for now
Same issue, so....
bump....

Improving stability

Hi
Glad I came across this forum - very in depth
I've had an HTC Touch 2 for about 5 months now. I wanted a Windows device initially and wanted full Exchange sync capabilities including tasks, etc.
The phone does everything I wanted it to but for two things:
1. Flash doesn't work
2. It's unstable
On the first point Opera doesn't seem to work with Flash anyway but it has both IE and FlashLite installed, and yet the BBC iPlayer still does not work even in IE.
The "movie" loads in so far as the "home screen shot" comes up but no PLAY button, it just whirs round in a circle endlessly.
Can this be solved?
On the second point, I had a Windows device (called the Orange SPV I think) years ago which was ergonomically almost useless. This new Windows device is much more usable but deeply unstable.
Most problems occur when an app crashes when the phone is locked with the effect that the OS seems to go down with it like Windows 95, so you can't actually take the unit out of locked mode - the slider thing doesn't have any effect.
I have to take the battery off the back and cold reset it about 2 or 3 times a week. A bit like the old Orange SPV it has the feel of something so nearly ready to go to market, but for a little more testing.
Does anyone know if this is just Windows and the answer is to go for another OS (if possible, else the only solution is to ditch the handset altogether), or if a subsequent update makes things more stable?
Apparently I have ROM version 1.28.401.4 (66092)
Grateful for any advice.
Thanks,
Mark

Categories

Resources