On the ATT 8525, there is no way via the GUI to add:
802.1x Identity
802.1x Domain
This needs to be added to make the device work with a Server Cert and a Cisco Device, this is verified by:
I have a Symbol device that has the fully enabled network configuration application "Wireless Companion". With it's Wireless Configuration Editor the options exist to set:
Profile ID:
Name:
ESSID:
Operating Mode:
Infastructure
Country:
Allow Any Country
Authentication:
PEAP
Tunneled Auth:
MS CHAP v2
[ ] user Certificate
Installed Server Certs
corpcert
[ ] Validate Server Cert (this can be hacked in the reg)
Prompt for Login at:
[ ] At Connect
[ ] On Resume
[ ] At Time
Username:
whatever
Domain:
corpdomainname_without_dot_com
Password:
***
[ check] Advanced ID (THIS IS THE REG DATA I NEED BELOW)
802.1x Identity:
need to enter ssid here
Domain:
need to enter corpdomainname_without_dot_com
-----------------
Any Ideas?
Where did you get the application. I am trying to be able to browse my home network from my device and also view my device on my home network. In order to do that I need ot part of the domain.
Related
So, I have the latest Qtek ROM installed and MS Exch 2003 with SP2. I have created and recreated activesync sessions and on my Exchange Server I continue to get the following error:
Event Type: Error
Event Source: Server ActiveSync
Event Category: None
Event ID: 3005
Date: 3/20/2006
Time: 12:32:51 PM
User: XXXXXX
Computer: XXXXXX
Description:
Unexpected Exchange mailbox Server error: Server: [XXXXXX] User: [[email protected]] HTTP status code: [400]. Verify that the Exchange mailbox Server is working correctly.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
And my PUSH is not pushing...anyone else get this error?
[note: I posted this on HoFo...no responses yet]
I have tried to read through many of the thread here, but I don't see anything that is really pointing out the resolution. I have been working with my IT guy and we are stumped.
Hello,
Problem: Cannot get my pda (HTC Mogul) to connect to a samba share.
Behavior: Resco File Explorer (V7.03) keeps asking for a password when I try to map to a samba share.
Basic Setup Information:
ROUTER: Dynamic Type Configuration acting as a DHCP Server. The DNS is Automagic from the IP.
LAPTOP (windows xp): 192.168.1.38 / 255.255.255.0
SAMBA_PC (Suse 11) : 192.168.1.36 / 255.255.255.0
PDA (Sprint Mogul, Windows Mobile 6 Pro): 192.168.1.37 / 255.255.255.0
-----Below is my current smb.conf---------------
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2008-06-07
[global]
workgroup = MCHOME
printing = cups
printcap name = cups
printcap cache time = 750
cups options = raw
map to guest = Bad User
include = /etc/samba/dhcp.conf
logon path = \\%L\profiles\.msprofile
logon home = \\%L\%U\.9xprofile
logon drive = P:
usershare allow guests = Yes
use spnego = No
[homes]
comment = Home Directories
valid users = %S, %D%w%S
browseable = No
read only = No
inherit acls = Yes
[profiles]
comment = Network Profiles Service
path = %H
read only = No
store dos attributes = Yes
create mask = 0600
directory mask = 0700
[users]
comment = All users
path = /home
read only = No
inherit acls = Yes
veto files = /aquota.user/groups/shares/
[groups]
comment = All groups
path = /home/groups
read only = No
inherit acls = Yes
[printers]
comment = All Printers
path = /var/tmp
printable = Yes
create mask = 0600
browseable = No
[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = @ntadmin root
force group = ntadmin
create mask = 0664
directory mask = 0775
[linuxpodcasts]
comment = downloaded shows
inherit acls = Yes
path = /home/jason/Podcasts/
read only = No
[lacie]
comment = storage drive
inherit acls = Yes
path = /media/disk/
read only = No
------------------------------------------
PDA TESTING:
1) Ping \\LINUX-PD\lacie
Results: 24.A.B.C
Note: this number is unknown. It is only similar to the Router Configuration in the first number!
2) Ping 192.168.1.36
Results with Reply from 192.168.1.36
3) Ping \\LAPTOP
Results 24.A.B.C
Note: This is the same number as PDA Testing #1
-------------------------------------------
LAPTOP TESTING:
------------------------------------------
1) Ping \\LINUX-PD
Results: 24.A.B.C .Qu1nnLAN
Note: This is the same number as PDA Testing #1 including the name of the wireless lan!
2) Ping 192.168.1.36
Results with reply from 192.168.1.36
3) Ping 192.168.1.37
Results with reply from 192.168.1.37
4) net view \\LINUX-PD
<< shows all of the shares , Not Shown, The Command Completed successfully >>
5) net use g: \\LINUX-PD\lacie
<< asks for username / pass. The Command Completed successfully >>
6) From File MANAGER, I can sucessfully browse the network and view the shares!
From XP > Command Prompt: ipconfig /all
Windows IP config:
Host Name: LAPTOP
Primary DNS Suffix:
Node Type: Unknown
IP Routing Enabled: NO
WINS Proxy Enabled: NO
DNS Suffix Search List: Qu1nnLAN
...
Ethernet adapter wireless Network Connection
Connection Specific DNS Suffix: Qu1nnLAN
...
Connection
DHCP Enabled: Yes
Autoconfig Enabled: Yes
IP Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Server: 192.168.1.1
DNS Servers: 24.W.X.Y
24.W.X.Z
------------------------------------------
LINUX-PD TESTING: (Includes steps from Chapter 38 of the Samba Checklist)
------------------------------------------
1)
Ping 192.168.1.37
Results in Reply form 192.168.1.37
2)
linux-pd:~ # smbclient -L LINUX-pd
Enter password:
Domain=[MCHOME] OS=[Unix] Server=[Samba 3.2.0rc1-22.1-1795-SUSE-SL11.0]
Sharename Type Comment
--------- ---- -------
profiles Disk Network Profiles Service
users Disk All users
groups Disk All groups
print$ Disk Printer Drivers
linuxpodcasts Disk downloaded shows
lacie Disk storage drive
IPC$ IPC IPC Service (Samba 3.2.0rc1-22.1-1795-SUSE-SL11.0)
Photosmart_3200 Printer Photosmart 3210
HIDDEN Disk Home Directories
Domain=[MCHOME] OS=[Unix] Server=[Samba 3.2.0rc1-22.1-1795-SUSE-SL11.0]
Server Comment
--------- -------
LAPTOP Pentium M750 1.86GHz, 1GB RAM
LINUX-PD Samba 3.2.0rc1-22.1-1795-SUSE-SL11.0
Workgroup Master
--------- -------
MCHOME LINUX-PD
3)
linux-pd:~ # nmblookup -B LINUX-PD __SAMBA__
querying __SAMBA__ on 127.0.0.2
192.168.1.36 __SAMBA__<00>
4)
linux-pd:~ # nmblookup -d 2 '*'
added interface eth0 ip=fe80::213:20ff:fecb:7cbb%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.36 bcast=192.168.1.255 netmask=255.255.255.0
querying * on 192.168.1.255
Got a positive name query response from 192.168.1.36 ( 192.168.1.36 )
192.168.1.36 *<00>
5)
linux-pd:~ # smbclient //LINUX-PD/lacie
Enter HIDDEN password:
Domain=[MCHOME] OS=[Unix] Server=[Samba 3.2.0rc1-22.1-1795-SUSE-SL11.0]
smb: \>
6)
linux-pd:~ # nmblookup -M MCHOME
querying MCHOME on 192.168.1.255
192.168.1.36 MCHOME<1d>
-------------------------------------------
Additional Questions:
1) how do you find the machine name on the PDA similar to how the LINUX-PD = 192.168.1.36?
2) why is the wireless router name showing up when I ping?
I am at a loss.
I will be posting to a Resco forum as well.
Any suggestions helping this newb would be great.
Thank you for your time
qu1nn
_______________
same problem here. did u fix it?
I got it working, albeit Resco doesnt remember the password correctly and it has to be entered in every time I start a new session.
make note and read before you read the next thread....
that resco is aware of the issue:
http://resco.net/pocketpc/explorer/faq.asp?faq=network#85
Check out my posting on rescos forums for what I had to do:
http://resco.net/forums/ShowPost.aspx?PostID=17810
I hope this helps
qu1nn
hello guys,
fail to set my network profile for mms (Orange MD).
Operator settings:
Code:
WAP:
Denumirea profilului / Profile name: Orange IMO
Pagina de start / Homepage: ht tp:/ /wap.orange.md
Purtator date / Data bearer: GPRS
Punct de acces GPRS / APN: wap .orange. md
Adresa IP / IP address: 192.168.127.124
WAP Port (WAP 1.x): 9201
WAP Port (WAP 2.0): 3128
Nume utilizator / User name: <camp liber>
Parola / Password: <camp liber>
MMS:
Denumirea profilului / Profile name: Orange MMS
Pagina de start / Homepage: ht tp:/ /mms/mms
Purtator date / Data bearer: GPRS
Punct de acces GPRS / APN: mms .orange. md
Adresa IP / IP address: 192.168.127.125
WAP Port (WAP 1.x): 9201
WAP Port (WAP 2.0): 3128
Nume utilizator / User name: <camp liber>
Parola / Password: <camp liber>
I do not know how to make a profile for mms and how you set it to be active.
please help me.
guys i need a favour
here are settings for gpssetup2 on i5800 but i have recently changed it but didnt save original settings...and now i want to compare it...can somebody please write original settings?
here is what i have done:
1. Open stock dialer
2. Type: *#3214789650#
3. This should open GPSSetup2
4. Settings:
> Parameter
> Address
Server type: UMTS SLP
Address type: URL
Address: supl.google.com:7276
> Start mode
Start mode: Hot start
> SSL
Enable SSL: Disabled
> Position mode:
Position mode: option3
[v] Standalone
[ ] UP MS Based
[ ] UP MS Assisted
[v] 2G CP MS Based
[v] 2G CP MS Assisted
[v] 3G CP UE Based
[v] 3G CP UE Assisted
> Fix Request Settings:
> Session type: New Position
> Sessip operation: MS-Based
> Number of fixes: 999999999
> Time between fixes: 2000
> Session timeout: 10
> Accuracy: 50
> Server option: local
5. GPSOne XTRA: Enabled
o if you want you can try it yourself...see if that improves your gps...tnx
Problem:
WPA2 Enterprise TTLS certificate unable to connect, always get ''Incorrect password" after updating to 4.3 from 4.2.2
In 4.2.2 i would set
Name: SecureWifi
Auth type: 802.1x
Ca Certificate: The CA Certificate
User Certificate: The user certificate ,different from CA
User name: The name
Anonymous name:
User Pass: Password
And it will connect!
4.3 behavior:
Name: SecureWifi
Auth type: 802.1x
Ca Certificate: The CA Certificate
! No user certificate drop_box !
User name: The name
Anonymous name:
User Pass: Password
Do i need to merge the CA cert with the user? and how do i do that?
Currently the CA cert contains all keys including CA user key(different from user key)
Any idea would help..
AndoidTab said:
Problem:
WPA2 Enterprise TTLS certificate unable to connect, always get ''Incorrect password" after updating to 4.3 from 4.2.2
In 4.2.2 i would set
Name: SecureWifi
Auth type: 802.1x
Ca Certificate: The CA Certificate
User Certificate: The user certificate ,different from CA
User name: The name
Anonymous name:
User Pass: Password
And it will connect!
4.3 behavior:
Name: SecureWifi
Auth type: 802.1x
Ca Certificate: The CA Certificate
! No user certificate drop_box !
User name: The name
Anonymous name:
User Pass: Password
Do i need to merge the CA cert with the user? and how do i do that?
Currently the CA cert contains all keys including CA user key(different from user key)
Any idea would help..
Click to expand...
Click to collapse
No one uses WPA Enterprise?