Changing all three splash screens - P3300, MDA Compact III upgrading etc.

I'm trying to dump my own custum splash screens into my artemis.
I'm following directions on this* link.
What should i fill in for the Model ID, Language, OEM version, Operator Version, CID and startadresses for the images?
*(http://forum.xda-developers.com/showthread.php?t=284006)
Thanks in advance.

Related

Flashing only Splash or GSM

Hi,
I searched the forum on how to flash ONLY the splash screen or a different radio rom, but I didn't find an answer. Is there anyone who knows if it is possible to flash only the radio or splash screen and how? with pdocread.exe? what are the starting and ending addresses etc.
Thank you very much!

I think I killed my elf0100, Help ?

I don't mind paying someone who would help me revive this device
The device is a HTC ELF0100 locked to movistar spain
I tried to unlock it with the following files
Cert_SPCS.cab
EnableRapi.cab
Touch_Unlock.zip
I got a 8 digit code that would not work.
I then tried unlocking with ELF_USPL-v1.zip. This is where things went wrong. The device did not upgrade ok.
Now the device just shows the operator logo for a few seconds then switches off.
It sometimes goes into booloader mode. And I could gather the following information
IPL 2.20.0002
SPL 1.11.0000
Please help, I just want to revive this device now. I don't care about unlocking !
Anyone with suggestions ? I have no idea what to do next
Same happened to my phone. i had to contact HTC support. thay sorted this out for me. i think you should do the same.. but dont tell them that you tried unlocking, otherwise they wont help you..
Spain EspaƱol +34-914-146-588 Mon - Fri 9 am - 5:30 pm
Thanks bro for their contact details. Normally they are very unco-operative with phones that have been tampered with or if they know you tried to unlock it. Also we are near the weekend and I need this phone working before monday.
Now I really do not want to unlock it, just wanna revive it.
I cannot even go a hard reset now
[REF]Recover / Revive your dead / bricked HTC ELF or ELFIN[ONLINE]
silhouette said:
I don't mind paying someone who would help me revive this device
The device is a HTC ELF0100 locked to movistar spain
I tried to unlock it with the following files
Cert_SPCS.cab
EnableRapi.cab
Touch_Unlock.zip
I got a 8 digit code that would not work.
I then tried unlocking with ELF_USPL-v1.zip. This is where things went wrong. The device did not upgrade ok.
Now the device just shows the operator logo for a few seconds then switches off.
It sometimes goes into booloader mode. And I could gather the following information
IPL 2.20.0002
SPL 1.11.0000
Please help, I just want to revive this device now. I don't care about unlocking !
Click to expand...
Click to collapse
This should help.
Ok bro, I'll try this and before that let me just thank you !
you have flashed wrong spl and ipl, let me know you want an english rom or spanish rom. you will have to flash original rom, in order to revive your device, is it with 64 mb RAM or 128 MB ram, then i will let you know what to do.
gagandeepbains said:
you have flashed wrong spl and ipl, let me know you want an english rom or spanish rom. you will have to flash original rom, in order to revive your device, is it with 64 mb RAM or 128 MB ram, then i will let you know what to do.
Click to expand...
Click to collapse
Thanks bro. I need a spanish rom. I really do not know if it's 64 or 128 ram. Do I have to open the device?
go to following forum- http://forum.xda-developers.com/showthread.php?t=379034 and download following rom--RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe, connect device to computer via usb cable and press camera button and power button together, a tricolor bootloader will appear on device screen, now run the downloaded rom. This is english rom, you can search any original spanish rom if available in above post and flash it afterwards, but initially bring your device to life with the rom i have mentioned above.
Ok, gagandeepbains. I'll be back with the results. Thanks bro!
gagandeepbains said:
go to following forum- http://forum.xda-developers.com/showthread.php?t=379034 and download following rom--RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe, connect device to computer via usb cable and press camera button and power button together, a tricolor bootloader will appear on device screen, now run the downloaded rom. This is english rom, you can search any original spanish rom if available in above post and flash it afterwards, but initially bring your device to life with the rom i have mentioned above.
Click to expand...
Click to collapse
Thanks bro that worked like a charm! Any idea how I get the spanish language back? Now the device is in english
I regret not reading before doing what I did and going through the entire mess.
Thanks again mate
you can try ROM 2.20.214.1 ESN (Windows Mobile 6.1 - SO CE 19214 - Build 19214 aku 1.0.4) or any other you like at -- http://www.htcspain.com/foro-f30/guia-de-roms-para-htc-equot-touch-sequot-t4576.html , but you must cid unlock device before flashing.
Thanks for the quick reply bro. I tried Cert_SPCS.cab, EnableRapi.cab, and Touch_Unlock.zip files which gave me an incorrect code.
Any other way to unlock this? Any way to change language if I cannot unlock the device ?
go to following page http://forum.xda-developers.com/showthread.php?t=408637, and download file-USPL_2.28.0000.zip . Unzip this file in a folder on desktop and replace RUU_Signed.nbh file in RUU folder with that of downloaded rom's RUU_Signed.nbh file. install enable_rapi and cert_spc files already with you to device memory, soft reset device and remove its sim card and memory card. Run the elf-uspl.exe file extracted in folder on your desktop after connecting the powered on device to computer, and follow on screen instructions.
Hey I followed your instructions, I got errors on the first two occassions. Process completed successfully the third time. The handset is still locked with language english.
Rom version : 2.20.707 1B WWE
Rom date : 10/02/07
Radio version : 03.07.90
Protocol : 4.1.13.51
Extrom version : 2.20.707.101
Any way to change back to spanish ?
Thanks

Operator screen always at the start of the Elf

Hi,
I have an Elf and i unlock the sim, the cid and flash a new rom, so far so good.
Every time i start the phone, it always shows the operator screen(Orange). Is there any way to remove that startup image of the operator?
Thank you.
http://forum.xda-developers.com/showthread.php?t=469146
heres youre answer...
I already try that but on the end of the flash it gives me an error of the model id
Can anyone help me??????

Changing my bootscreen back to Htc one

Can any one tell me how to change my boot screen back to htc default ? i flashed my htc with a 6.5 beta rom and it got changed to a different one with i dont like
Any help would be great
search for bootloader screen changer in elf update section u can set any pic via that utility hope it will help
i tryied to search the update section but i cant find anything , can u tell me the exact thread if possible
can i just change the Splash pic ? how can i do that
when i try to flash a different splash screen i get this error :
Error [296] Upgrade only
This NBF file cannot be used for ur pda mobile phgone . Please get newer NBF file
can anyone help me
Note : when i start my phone i get the splash screen PDAMOBILZ - Thai edition , then HTC splash screen follows i need to remmove that PDAMOBILZ screen
Use the Artemis tools, is for Elf/Elfin too, is very easy and quick.
http://forum.xda-developers.com/showthread.php?t=317726
kss41112 said:
i tryied to search the update section but i cant find anything , can u tell me the exact thread if possible
can i just change the Splash pic ? how can i do that
when i try to flash a different splash screen i get this error :
Error [296] Upgrade only
This NBF file cannot be used for ur pda mobile phgone . Please get newer NBF file
can anyone help me
Note : when i start my phone i get the splash screen PDAMOBILZ - Thai edition , then HTC splash screen follows i need to remmove that PDAMOBILZ screen
Click to expand...
Click to collapse

Bootscreen changing

In this case of my O2 XDA orbit 2, I wanna change the first screen when starting up (the bootscreen, shows an O2 image with firmware, radio, rom info, etc, version info in the corner).
I've already searched and all I could find was info for changing the second splash screen and the option for having an animated image.
http://forum.xda-developers.com/showthread.php?t=317726
http://forum.xda-developers.com/showthread.php?t=296481&highlight=bootscreen
So I'm asking once and for all for me and others as well. Can it be changed and if so how?
Try Advanced Configuration Tools 3.3.0
Download link:
http://www.touchxperience.com/downl...ion-tool/Advanced_Configuration_Tool_v3.3.cab
to enable, disable, change boot screens etc..
personally I did not test it I Use the Tool Above for other purposes, but I saw there is also this option...
..........OR...........
Just use the artemis splash screen tool 0.7.1
It is a .NET Framework 3.5 application - you need the Microsoft runtimes.
Also do not forget the USPL flash
For me.. when i upgraded to different ROMS.. it automatically changed all the tym.. so now the default blue o2.. is nowhere..
Terrarist said:
In this case of my O2 XDA orbit 2, I wanna change the first screen when starting up (the bootscreen, shows an O2 image with firmware, radio, rom info, etc, version info in the corner).
I've already searched and all I could find was info for changing the second splash screen and the option for having an animated image.
http://forum.xda-developers.com/showthread.php?t=317726
http://forum.xda-developers.com/showthread.php?t=296481&highlight=bootscreen
So I'm asking once and for all for me and others as well. Can it be changed and if so how?
Click to expand...
Click to collapse
use the splash screen changer .... change all boot up screen from pc ..... no need to edt any files on artem*** ......... pm me if u want that
Am golden now. It worked differently with the 3 different roms i was running. Now I've changed the initial bootscreen and the animated one. All's left is the secondary boot screen (this is usually the windows screen)
varungupta07 said:
use the splash screen changer .... change all boot up screen from pc ..... no need to edt any files on artem*** ......... pm me if u want that
Click to expand...
Click to collapse
please send the the link for the spalsh screen changer...

Categories

Resources