starts in landscape mode ??? - 8525, TyTN, MDA Vario II, JasJam General

hi , i have a new htc tytn and i found that when ever i click the power button to waken out of the stand by mode the screen is in the landscape mode( even though the slide pad is closed) for 1-2 sec and then realigns to the portrait mode.
Is this a know issue ???

It does that if you first take it out of the case that comes with it. It senses the magnet in the case cover and puts it in landscape then realizes it's not anymore and then switches to portrait. Annoying yeah. I got a new case for it which is better and doesn't do that anymore.

ThaiM said:
It does that if you first take it out of the case that comes with it. It senses the magnet in the case cover and puts it in landscape then realizes it's not anymore and then switches to portrait. Annoying yeah. I got a new case for it which is better and doesn't do that anymore.
Click to expand...
Click to collapse
thank you Thaim for the answer...
you are so very right,,,,

Related

Screen in landscape mode when keyboard is closed

Guys,
First off - Way to go Mods - its great to have a TyTN only forum at last!
Ok my problem is -
When i 'awake' my TyTN, the screen is sometimes in landscape mode, even though the device has teh keyboard shut and is being used in the portrait mode.
Is this a part of teh infamous alignment bug? And does anyone know of a fix?
ptm
As far as I know, this seems to happen when the device is being used with the case. It seems that the magnet in the belt clip makes the phone go to landscape.
As far as I know, this seems to happen when the device is being used with the case. It seems that the magnet in the belt clip makes the phone go to landscape.
aaah....now that would make sense. it seems to have started when I used the case.
I like using a case. Are there any recommendations for adecent replacement?
Thanks for helping out fella!
Been using the case since got the phone.
Sometimes it does indeed be in landscape mode when I take
it out, but it always reset to portrait mode as soon as I get it out.
Happens to me too.
jeezus said:
Been using the case since got the phone.
Sometimes it does indeed be in landscape mode when I take
it out, but it always reset to portrait mode as soon as I get it out.
Click to expand...
Click to collapse

Phone starts off in Horizontal screen.

I usually use the phone in vertical mode, but once in a while when I take the phone off sleep, it starts off in horizontal mode. Mind you it was not in horizontal mode to begin with.
I tried duplicating the problem by leaving the phone slightly slided open and turning it on, but I can't recreate the issue.
This has something to do with the case being magnetic. I read about it somewhere.
barrr said:
This has something to do with the case being magnetic. I read about it somewhere.
Click to expand...
Click to collapse
Quite right barr. The internal switch that operates the landscape mode is a magnetically operated one. Normally as you slide open the keyboard it passes over the switch. BUT when in the holster cases, the powerful magnets on the cases can pass close enough to the switch to change to landscape. Not a big problem really, it will turn itself back around in a second or two.
You can test this by passing the case magnet slowly around the edge of the device and see in turn to landscape mode!
Mike

Is there a way to stop aspec change when keyboard pulled out?

Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
lorrin said:
Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
Click to expand...
Click to collapse
This might help:
http://forum.xda-developers.com/showthread.php?p=1098622#post1098622
Mike
Cheers. I will have a look
Why do you need to turn auto rotation off?
sprice82 said:
Why do you need to turn auto rotation off?
Click to expand...
Click to collapse
same reson I want to
to stop the screen rotation when puling out of my case
elivne said:
same reson I want to
to stop the screen rotation when puling out of my case
Click to expand...
Click to collapse
If I understand correctly you mean when taking the device out of the carrying case. The orientation can change when taking it out of the case due to the magnetic catches in the case operating the keyboard magnet operated switch.
If this is the problem then I suggest using a case with no magnets. (a better solution than disconnecting the switch). This however is not the same as not wanting landscape mode when the keyboard is out as the OP wants.
Mike
I remember getting very annoyed with the phone changing orientation when in it's magnetic case when I first got it. I searched and searched for days to find a setting or tweak to fix it. Eventually, I mentioned to my wife that I need to buy a new case.
She said "why don't you put it into the case the other way round?".
I put it in with the screen facing the belt rather than the magnets, and it's worked fine ever since that way round! Felt such an ass!
Sometimes I don't see the wood for the trees me...
I know it's the magnet doing it
I've tried the following:
1. Buy a new case with only one magnet clip (a magnet clip is more comfortable then scotch or any other solution).
2. Reverse the screen to the back.
None works, I think it's the way I pull it out...
Anyway, the only solution doesn't exist, I can't find a normal belt side case.
So my last resort is to find a way to stop the rotation, I always miss calls cuz the rotation during a call slows the device and I can't answer...
I tried to use that registry hack, I followed the instructions and I do not have the rotate icon..even after two resets. Is there any other way to force your screen a certain way?

magnet triggers action?

happened to set my epic down on my wifes camera case, which has a magnetic closure flap...the phone was asleep when i set it down, but when it got close to the magnet, the screen turned on and skipped the "drag to unlock" screen...ive tried it numerous times since, and get the same result...
anyone else experience this?
Must be like blackberries. When you pulled them out of their case the screen would turn on and when you put them back in the screen would turn off.
Sent from my Epic using XDA app.
I remember reading about the magnetic sensor in a list of specs but this is the first time I've heard of it actually being triggered. It would be nice to see some cases that take advantage of this feature.
I just pulled a hard drive magnet off of my cubicle wall and tried it. Doesn't work for me.
scriz said:
I just pulled a hard drive magnet off of my cubicle wall and tried it. Doesn't work for me.
Click to expand...
Click to collapse
Sign of a true techie...we have hard drive magnets hanging around for absolutely no reason.
I just did the same thing with the same results.
othan1 said:
Sign of a true techie...we have hard drive magnets hanging around for absolutely no reason.
I just did the same thing with the same results.
Click to expand...
Click to collapse
lol, yeah I work in IT on a military base and we have alot, i mean ALOT of hard drive magnets. theres probably 20-30 on each cubicle cabinet door. lmao.
sweet spot seems to be about where the LED flash is....
uuesley said:
sweet spot seems to be about where the LED flash is....
Click to expand...
Click to collapse
Yup, that works for me..but doesn't go to the lockscreen, immediately goes to the the home screen.
I would assume it is for either the home media dock, or an upcoming car dock, so it automatically goes into the proper program when in place.
Koadic said:
I would assume it is for either the home media dock, or an upcoming car dock, so it automatically goes into the proper program when in place.
Click to expand...
Click to collapse
Hope they plan on putting out a maintenance release for that..I just installed Car Home, locked the screen and put the magnet next to it and it came on in landscape mode, but just on the home screen.
Would be nice if we could use something like tasker and create a couple of actions depending on the proximity of a mgnet...
Haha all I "use" the magnet sensor for is with the Tricorder app, magnetic flux option. =P Might help to find the best spot... (I guess I'm not cool enough to have hard drive magnets at work.)
It's for the slide-out keyboard. Hold your phone in portrait and keep the magnet to the left of the LED flash. The screen will re-orient itself to landscape. Move the magnet and it will go back.
arashed31 said:
It's for the slide-out keyboard. Hold your phone in portrait and keep the magnet to the left of the LED flash. The screen will re-orient itself to landscape. Move the magnet and it will go back.
Click to expand...
Click to collapse
Uhh..what?! Its not for the keyboard, I do know that. But I don't know what its for.
It's for the keyboard. Put your phone in landscape mode with the on screen keyboard open. Put the magnet on the phone and the on screen keyboard will disappear.
arashed31 said:
It's for the keyboard. Put your phone in landscape mode with the on screen keyboard open. Put the magnet on the phone and the on screen keyboard will disappear.
Click to expand...
Click to collapse
Yep....that makes sense....just tried it, and understand what you're saying....
Thanks for the info....

Does anybody noticed this ? is it software bug or faulty sensor ?

https://www.youtube.com/watch?v=zy_Qny0mjuc
The screen is rotating sometimes with the phone flat on table or sometimes holding it in my hand in portrait mode
It doesn't happen all the time but sometimes it does
D3VI0US said:
https://www.youtube.com/watch?v=zy_Qny0mjuc
The screen is rotating sometimes with the phone flat on table or sometimes holding it in my hand in portrait mode
It doesn't happen all the time but sometimes it does
Click to expand...
Click to collapse
It's pretty normal for a phone to switch to landscape mode while on a table, tables are virtually never perfectly flat. So that's that. But if the device gets stuck in landscape mode while you're holding it out I portrait mode, and you need to switch auto-rotation off and on in order to fix it, that's a bug that a few people have noticed worth this device (including new). The only fix so far is to toggle the auto-rotation.
You need to calibrate it.
anglerstock said:
You need to calibrate it.
Click to expand...
Click to collapse
how would you do that?
D3VI0US said:
how would you do that?
Click to expand...
Click to collapse
I am not sure yet. On other devices I knew how to, on this one I have only seen it on the maps. You have to tilt it doing the 8 shape until it says calibrated.
Rma
D3VI0US said:
https://www.youtube.com/watch?v=zy_Qny0mjuc
The screen is rotating sometimes with the phone flat on table or sometimes holding it in my hand in portrait mode
It doesn't happen all the time but sometimes it does
Click to expand...
Click to collapse
This happen because your phone was on landscape mode before you lay it flat on the table. And because launcher doesn't rotate to landscape, you thought that your phone is in portrait mode until you got into the settings.

Categories

Resources