Related
ok hopefully someone can tell me what i'm doing wrong if anything. . . I previously installed touch-it v2.3 with no problem but i have tried at least 15 times to put the touch it full version and have no luck. I'm lost. I even went back and did the v2.3 again and it worked fine. any ideas? I am using ruu version 4.26.531.1, i am installing aserg then soft reseting then running 1__UPGRADE_ROM.bat . . . then when i hard reset it gets stuck on the t mobile white screen. driving me nutz!
Is Ur Device Hard Spl'd?
HardSPL doesn't really mean anything in this case, because he's using aserg's method to try to flash.
My advice- don't flash this rom. get a newer rom that uses HardSPL/USPL. It'll also be wm6.1 (shiny shiny). PDOCwrite (asergs method) is kinda old.
fzzyrn said:
HardSPL doesn't really mean anything in this case, because he's using aserg's method to try to flash.
My advice- don't flash this rom. get a newer rom that uses HardSPL/USPL. It'll also be wm6.1 (shiny shiny). PDOCwrite (asergs method) is kinda old.
Click to expand...
Click to collapse
Where can i get one of these 'newer roms' you speak of? also i tried to make sense of dougstoner's directions on how to hardSPL and call me a nub but i couldn't make sense of it. . .
This rom is really old. check the post dates, but the roms are numbered by version. Higher version=newer version. Aserg's method is what we used to use to flash roms back in the day before HardSPL (herald was weird in that HardSPL was released AFTER many people got it)
Anywhoo, for HardSPL, go to the HardSPL thread, read it over and then follow these directions.
There are 3 cabs. Install them in the order that Papamopps posted. Soft reset, and then run the HardSPL RUU (romupdateutility.exe) to HardSPL your device.
fzzyrn said:
This rom is really old. check the post dates, but the roms are numbered by version. Higher version=newer version. Aserg's method is what we used to use to flash roms back in the day before HardSPL (herald was weird in that HardSPL was released AFTER many people got it)
Anywhoo, for HardSPL, go to the HardSPL thread, read it over and then follow these directions.
There are 3 cabs. Install them in the order that Papamopps posted. Soft reset, and then run the HardSPL RUU (romupdateutility.exe) to HardSPL your device.
Click to expand...
Click to collapse
Alright my device is now successfully Hard Spl'd . . . thanks a lot! Now to find the newest/best touch it rom. . . Anyone have a link for me? I am using Touch-IT v4.4 stuffed atm
just look at the version numbers for the newest. Many people have their own preferences, but i feel that Open Touch 6.5 lite (no spb or tl) is just brilliant. But thats probably because i use it.
one question- is touch-it 4.4 wm6.1 or wm6? I'm pretty sure its 6.1, but i gotta clarify
fzzyrn said:
just look at the version numbers for the newest. Many people have their own preferences, but i feel that Open Touch 6.5 lite (no spb or tl) is just brilliant. But thats probably because i use it.
one question- is touch-it 4.4 wm6.1 or wm6? I'm pretty sure its 6.1, but i gotta clarify
Click to expand...
Click to collapse
man honestly i have no idea how to even check that. . .and if u could help me out with a link to download open touch 6.5 lite (the version u have) i would be greatly appreciative! I promise im not lazy i just never find it when i search the forum. . .thanks again! ! !
here you go buddy......
http://forum.xda-developers.com/showthread.php?t=400642
touch it 4.4 is wm6.1
Hello
Sorry for that Asking Stupid Questions again. (my English isn't very good too)
I have Read many Posts for some Hours so i could Help myself Solving the Problem
How to Hard SPL
Flashing Roms via HardSPL
Flashing Roms via MicroSD Card
other Threads with possibly same Problems
...
Now i think that i have Forgot or Missed Something quit Important.
Either i Forgot something or probably didn't Understand the Guides and HowTo's....
About My Problem:
Ok i have an German O2 XDA Orbit 2 (HTC Touch Cruise or HTC Polaris)
December last Year i easily Flashed my Device with the "M-Amine 2.0 Final GER" Rom.
My Device worked after Flashing via HardSPL Perfectly.
Now i wanted to Flash the "Kostas244-Rom-WWE-WM6.5 Because i wanted to try the new WM6.5 on my Device.
But i simply cant Flash my Device, no matter waht Rom i try.
The Officially O2 Germay, the Flashed M-AMine 2.0 Final or any other Rom.
I can verify that i have the Required HardSPL, done all this by Flashing "M-Amine 2.0 Final".
But every Time i try to Flash via HardSPL i get these dammit "Error 260 Message".
Now Matter what Rom Upgrading or Downgrading...
Even the Flashing via MicroSD Card wont Work.
Please is there Somebody willing to take the Time and Help an Newbie Like me?
Thanks for Helping
Starsheriff
Starsheriff said:
Hello
Sorry for that Asking Stupid Questions again. (my English isn't very good too)
I have Read many Posts for some Hours so i could Help myself Solving the Problem
How to Hard SPL
Flashing Roms via HardSPL
Flashing Roms via MicroSD Card
other Threads with possibly same Problems
...
Now i think that i have Forgot or Missed Something quit Important.
Either i Forgot something or probably didn't Understand the Guides and HowTo's....
About My Problem:
Ok i have an German O2 XDA Orbit 2 (HTC Touch Cruise or HTC Polaris)
December last Year i easily Flashed my Device with the "M-Amine 2.0 Final GER" Rom.
My Device worked after Flashing via HardSPL Perfectly.
Now i wanted to Flash the "3LIT3_VIII_Full_GER" Because i wanted to try the new WM6.5 on my Device.
But i simply cant Flash my Device, no matter waht Rom i try.
The Officially O2 Germay, the Flashed M-AMine 2.0 Final or any other Rom.
I can verify that i have the Required HardSPL, done all this by Flashing "M-Amine 2.0 Final".
But every Time i try to Flash via HardSPL i get these dammit "Error 260 Message".
Now Matter what Rom Upgrading or Downgrading...
Even the Flashing via MicroSD Card wont Work.
Please is there Somebody willing to take the Time and Help an Newbie Like me?
Thanks for Helping
Starsheriff
Click to expand...
Click to collapse
The only thing I can suggest is to check your radio version... if it's 1.65.XX.XX then that could possibly explain the issue. You'll need to downgrade the radio before doing anything else. Here is the link (from Pcar's ROM thread) which contains a radio that can be flashed over 1.65.XX.XX.
http://rapidshare.com/files/285239274/Polaris_Radio_ROM_1.59.46.12.rar
3LIT3_VIII_Full_GER....is wm6.1...
@Alexander
Ah yes sorry that was right. I meant "pcarvalho eXtreme ROM 3.19 WM6.5" Rom.
Also gave "Kostas244-Rom-WWE-WM6.5" Rom a try, same Problem.
@dlotters
Thx for the Tip...
Sorry it didn't Work, same Problem like all the other Roms, Radios,...
I simply can't Flash my Device, even after an Hardreset!
Everytime it goes in Bootloadermode it got Stuck and then the HardSPL aborts with same Error Message. (Error 260)
And i absolutly dont know what i'am Missing or forgot to do. There is only one Thing im sure about.
That the Problem is on my side, the Flashtools are fine.
Starsheriff
Hallo
So i took some Time But i Solved my Problem. "HAPPY"
Looks Like my SD-Micro Card did the Trick and a dozen of Hardresets...
Starsheriff
Yesterday I've HSPL'd my leo.
Then I flashed the Dutty0.3v and thought everything was fine. Until this morning the device was unlocked with S2U2 and hung afterwards (not able to show manila page). After a softreset, device hung at white bootscreen (three red version lines bottom). Several softreset later, it actually lost all its settings, windows welcome center was welcoming me. So it did a hardreset.
Then I flashed another rom, the freyberryROM.V5.3. After flashing, I always hardreset the phone of course.
After two hours configuring and installing, all of a sudden some application weren't starting anymore, so I thought let's do a softreset, to see, if it fixes things. The same happened, device hung a bootscreen. After softreset, a hardreset occured again....
First I wanted to put the blame on the HSPL, but I think it was coincidence. But thinking over and over about my procedure and reading the dutty rom's thread, I think this has to do with S2U2. Maybe some of you experienced this as well, and we can put together what might be the culprit.
Details:
Using S2U2 v2.24 (video rawbuffer mode) - imported settings from reg-file.
Using T2Pro-Theme on SD-Card
Manila and every other HTC/WM setting concerning language set to German.
Hooked on Exchange2010 - Pushmail activated.
Somebody in Dutty's thread said, that those hard-resets get quite common with the newer ROMs, and it would help to flash a stock rom before, can somebody comment on this?
Thanks for any input!
ROM
I have had the same too with my former Blackstone, as I flashed it with T2M PDViet, I thought it is a virus, however I solved it by downloading a new version and installed it all over again, good luck
Donald24 said:
Yesterday I've HSPL'd my leo.
Somebody in Dutty's thread said, that those hard-resets get quite common with the newer ROMs, and it would help to flash a stock rom before, can somebody comment on this?
Thanks for any input!
Click to expand...
Click to collapse
We had to do this on all the WM6.5 cooked roms for Kaiser, not heard of it being required for HD2 yet, why not post this in the thread for the ROM you are using?
Before flashing another custom ROM, flash an official stock ROM (1.42/1.48).
I encountered these issues on my TytnII and this weekend, I got the same problem on the HD2. Flahing 1.48 WWE before flashing custom ROM solved the issue for me.
Also: flashing 2.xx ROMs using 1.42xxx SPL may result in unexpected issues.
tomasz said:
Before flashing another custom ROM, flash an official stock ROM (1.42/1.48).
I encountered these issues on my TytnII and this weekend, I got the same problem on the HD2. Flahing 1.48 WWE before flashing custom ROM solved the issue for me.
Also: flashing 2.xx ROMs using 1.42xxx SPL may result in unexpected issues.
Click to expand...
Click to collapse
I've had this on my TytnII as well, but I never heard it for the HD2. So Custom to Custom ROM flashing is a NO GO?
?? Is there any other SPL? SSPL and HSPL are both 1.42 based....
In the diamond and other devices like tynt you could fix this with MTTY but dont know if it will work with the hd2
I thought MTTY was for recovering a device after a bad/interrupted flash??
Can you really use it to fix the non-boot situation and recover your installation?
So, when talking about stock-rom flashing is SoftSPL-flashing enough, or is a full HSPL- or even CID-ID-corresponding flash (incl. radio-rom) necessary?
Can somebody shed some technical background around this issue? I don't understand that there are mysterious areas, which don't get flashed and updated when flashing from custom to custom rom. There is no logic that this works for ONE flash ONLY.
Viewing this post : http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 , I think a task 32 in MTTY after flash must be a solution (official RUU seem to make it). But never tried.
xvx45 said:
Viewing this post : http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1 , I think a task 32 in MTTY after flash must be a solution (official RUU seem to make it). But never tried.
Click to expand...
Click to collapse
Nope, officially hardresetting a device is recommended after flashing custom rom, I even ran into these issues without hard-resetting after flash (actually forgot it) , so leaving it intentionally out won't fix it.
Are you using CustomRUU to flash your device. I'm sure I read somewhere that flashing from the MicroSD card can cause problems but can't remember what they were now....just a thought
Donald24 said:
Nope, officially hardresetting a device is recommended after flashing custom rom, I even ran into these issues without hard-resetting after flash (actually forgot it) , so leaving it intentionally out won't fix it.
Click to expand...
Click to collapse
Ok, so, we have to found the "Format BINFS" task for HD2 bootloader. It's the command "task 29" on the Diamond (1) and the HD (BlackStone).
So for my experience on the Diamond, we have to do a task 29 before to flash to have a fully cleaned storage before write on this.
So I'ven't found any documentation on this for the HD2, I still investigate with IDA and original RUU, but it's my first attempt to decompile a soft...and it's not really easy to understand.
So we need people with two phone and able to practice JTAG to test a task 29 on Leo bootloader without risk to brick it...and it's not my case.
ps : sorry for my poor English.
crazyman1 said:
Are you using CustomRUU to flash your device. I'm sure I read somewhere that flashing from the MicroSD card can cause problems but can't remember what they were now....just a thought
Click to expand...
Click to collapse
It's not the flashing, me thinks. I experienced the issues only after flashing from custom TO custom rom. So I just think, it's like to old KAISER's times:
Always flash stock rom before!
Has anyone else noticed this?
I've never flashed a stock rom between custom roms and never had any lock up problems. I always use sspl or customRUU. Just thinking it might be the way you're flashing as I'm sure I read somewhere on the forum that there were problems with flashing from the MicroSD card.
xvx45 said:
Ok, so, we have to found the "Format BINFS" task for HD2 bootloader. It's the command "task 29" on the Diamond (1) and the HD (BlackStone).
So for my experience on the Diamond, we have to do a task 29 before to flash to have a fully cleaned storage before write on this.
So I'ven't found any documentation on this for the HD2, I still investigate with IDA and original RUU, but it's my first attempt to decompile a soft...and it's not really easy to understand.
So we need people with two phone and able to practice JTAG to test a task 29 on Leo bootloader without risk to brick it...and it's not my case.
ps : sorry for my poor English.
Click to expand...
Click to collapse
I am absolute unfamiliar with this tasks you do with the RUU....
So task 29 did solve any "leftovers" and freaky behaviour on a diamond?
Donald24 said:
I am absolute unfamiliar with this tasks you do with the RUU....
So task 29 did solve any "leftovers" and freaky behaviour on a diamond?
Click to expand...
Click to collapse
yup, diamond, hd, tynt and i think all htc devices... but nobody have tryed with the hd2... be carefull if you try but i think there shouldnt be any problem.. anyways at your risk
makeveral said:
yup, diamond, hd, tynt and i think all htc devices... but nobody have tryed with the hd2... be carefull if you try but i think there shouldnt be any problem.. anyways at your risk
Click to expand...
Click to collapse
hey - we're getting closer. thinking about a sub-forum about flashing techniques, they will surely get device-dependant at some point.
if a call of task 29 would not make any problems, should it not be made and considered as standard for custom flashing?
did ever anybody brick his device with it? there must be something, causing that fear...
nobody on xda normally shows this respect for trying out undocumented functions
Donald24 said:
hey - we're getting closer.
if a call of task 29 would not make any problems, should it not be made and considered as standard for custom flashing?
did ever anybody brick his device with it? there must be something, causing that respect
nobody on xda normally shows this respect for trying out undocumented functions
Click to expand...
Click to collapse
ya some people have bricked his device because of this... but well it can usually get fixed! problem was that they used mtty without having a hardspl and then they couldnt flash any rom... but if you have hardspl then no problem because you can flash from bootloader!
And if you dont have hardspl then you should also be able to flash HTc official rom(or the official rom that came with your device)
Anyways i wouldnt be first one to try it on my hd2 xD (only if i had problems)
makeveral said:
Anyways i wouldnt be first one to try it on my hd2 xD (only if i had problems)
Click to expand...
Click to collapse
Why hesitating? I'd love to see a "call task 29" as a menu item in your BSB tool I woke up this morning, and I felt for yelling "Task 29" to my girlfriend. No, to be honest, I didn't, I said "69" and enjoyed the morning.
I am going to try this method out and report back, but as it seems, it will be seen as a hack, that doesn't fit for everybody. But I would prefer this against always preloading a stock rom, if it would do the job.
Thanks for putting light on this!
Donald24 said:
Somebody in Dutty's thread said, that those hard-resets get quite common with the newer ROMs, and it would help to flash a stock rom before, can somebody comment on this?
Thanks for any input!
Click to expand...
Click to collapse
Hi,
this is correct, you can stop this happening by flashing a OFFICIAL rom before your cooked rom.
Although i have just posted a thread on MTTY, which is the EXACT answer to all problems in this thread.
THREAD HERE - (It is Under Construction so please dont use until the big red warning has gone, you cant miss it!!)
MG
I was having the same exact problems with softspl and hardspl and with any custom rom. My cousin has the same issues too. I flashed back to stock 1.61 and dont have hardresets anymore.
Lessons Learned in HD2 ROM Testing (Confessions of a Cooked ROM hopper) =)
Here's what happened:
I'd been through at least 20 "Flashes" of about 3-5 Cooked ROMs from the best chefs. I decided I wanted to reflash back to my stock ROM just to "refresh" (in lieu of mtty, of course which I still plan to do sometime). So off I went to download what I thought, at the time, was my stock ROM.
I thought I had a WWE Europe device (wrong for me to assume, I know) because I only had the UK Plug accessory included...
So I download the WWE Europe ROM and put it in my newly formatted 8gb microsd, renamed it to LEOIMG.nbh and started the upgrade process...
HOLY &*%$#@ it stops and tells me I have the wrong freaking device....
Then I thought that maybe, just maybe (since there was pinyin support from what I vaguely recalled) that it was in fact a WWE Asia ROM...
To cut the long story short, I flashed via microsd using the Asia WWE 1.48 (the CORRECT Stock ROM) and have started from scratch... (install HSPL, download Cooked ROMs, Flash, Test AND repeat from step 2... download, etc... you know the drill)
I'm only posting this in a new thread so that others who may run into what happened to me can find it and not panic that they can only get to a bootloader, etc...
I'm off to flashing some more Cooked ROMs... (BTW, I was a XDA2mini user way back, then shifted to an iPhone 2G and 3G for the past 2 years... and you know what, I missed the thrill of Windows Mobile Customization, I must say!)
Happy Flashing Everyone!
Well .... is that a "Confession of a Flasher-holic"?
LOL!!
This feeling is just like the feeling of those people that mod their PC .... mod their cars .... etc.
In life ... the kick or fun of it is the process ....
you were describing normal things which happen once you start modding or in this case flashing
htc12345 said:
you were describing normal things which happen once you start modding or in this case flashing
Click to expand...
Click to collapse
Exactly =) Now I need another HD2 for Flashing and Testing... back to work I go...
Hi Frinds my phone model num is t3320
i want to know that
all touch2 rom is compertabel for my device???????????
if not then how i update my phone rom??????????????/
Difference is that your phone does not have 3G or GPS. No reason why custom Rom's should not work.
So to flash a new Rom back-up your current Rom (see specific thread), apply hard SPL and select the Rom you like.....
Have fun.
Actually, one of the best ROMs I found here is based on your model. This one : New [ROM] [6.5.3_23541_WWE_Radio_3.53.25.20], uploaded by TangerineTractor. It's awesome and I recommend it to you. I'm using it now and it has only minor bugs that you/I can live with and although my model is T3333 after I flashed this ROM, my device says T3320 but everything works well. Try it!
You need to Hard SPL before you can install new ROM
But... there is no Hard SPL for T3320 until now
I already try T3333 hard SPL from Jockey on my T3320... but it not work!
troubletop said:
You need to Hard SPL before you can install new ROM
But... there is no Hard SPL for T3320 until now
I already try T3333 hard SPL from Jockey on my T3320... but it not work!
Click to expand...
Click to collapse
and there is no possibility in near future because i am coordinating with Jockywilson for the HSPL from last 10 DAys and finally failed to use HSPL
HSPL
But the HSPL has worked for me .... well I know its funny but did at the very first go. For my system config details - visit jockey's thread.
troubletop said:
You need to Hard SPL before you can install new ROM
But... there is no Hard SPL for T3320 until now
I already try T3333 hard SPL from Jockey on my T3320... but it not work!
Click to expand...
Click to collapse
Hello All,
As for Addicted2Xda, the HSPL worked for my device (T3320) too & that too in first go.
I dont know much about these things & this is the first device that I own. I verified the procedure & my device in the tri-color screen reads 1.28.Hard on the LHS side. So i believe that HSPL has worked. The only way to confirm that this works is to load a custom ROM(which i am ready to load) but before that I would like to
1. Backup my current ROM (i.e. the original one from HTC so that in event of any issue, i can claim warranty)
2. In case the custom ROM doesnt flash or work, I can load the original one.
Now I, dont know the procedure, requirements, pre-req on how to do it & hence I would like your expert help in this matter. I am ready to do it, its just that i dont know how to do it & I would like to learn.
So is it possible, for someone to post the stepwise procedure to
1. Backup the current ROM.
2. Load the custom ROM.
For our device Model T3320. I also have a reason to specify "our device Model T3320" in every request simply becaue I, have read most of the thread there & found out that there is much misleading information about this device T3320 here. For e.g. in some threads you find that the HSPL is not working in some you find that it works & other things.
My aim (request or what ever you call it) in humble manner, is to make it easy for guys like me (who are new / dumb at this) to use this beautiful forum, in much better manner.
It is possible that, my aim has already been achieved & I am doing something wrong (probably since I have not read all the rules), in which case I am due for a butt-whipping from all the senior members, which i am ready to take, provided, it becomes easy for guys like me to use this forum.
Long post, you all can thrash me for it & i would gladly take the heat, but please consider my reqeust.
Regards,
H.D
Great job HD.... i am also sailing in the same ship with you. T3320 is my first Windows mobile, there are a lot of doubts and confusions with the device.
Most of the terms used in this site are complete jargons to me, it would be great if someone comes forward to enlighten newbies like us.
If you have Hard SPLed your phone, just make sure that your boot loader shows 1.28.Hard (meaning you have successfully HSPLed your device). Luckily you do not need to backup your original ROM as it is already available in the Roll up thread . WWE Asia is your ROM (if you are an Asian that is ).
if your HSPL shows as 1.28.Hard, you can flash any custom ROM you feel like. Just give a few of them a shot, you are bound to like one of them .
Once I flashed my ROM with a custom ROM, never bothered to revert to the Original crap, be it my Vox, my Gene or my Mega.
BTW if you are really interested to know the methods / jargons (well some of them), just pm me and I will be glad to help you - but please note that I have a real job, so it will take some time .
Addicted2xda said:
If you have Hard SPLed your phone, just make sure that your boot loader shows 1.28.Hard (meaning you have successfully HSPLed your device). Luckily you do not need to backup your original ROM as it is already available in the Roll up thread . WWE Asia is your ROM (if you are an Asian that is ).
if your HSPL shows as 1.28.Hard, you can flash any custom ROM you feel like. Just give a few of them a shot, you are bound to like one of them .
Once I flashed my ROM with a custom ROM, never bothered to revert to the Original crap, be it my Vox, my Gene or my Mega.
BTW if you are really interested to know the methods / jargons (well some of them), just pm me and I will be glad to help you - but please note that I have a real job, so it will take some time .
Click to expand...
Click to collapse
Thank you so much Mr.Addicted2xda
1. How can i roll up to original ROM after flashing a new one?
2. Will the warranty be violated if i flash it?
neon7 said:
Thank you so much Mr.Addicted2xda
1. How can i roll up to original ROM after flashing a new one?
2. Will the warranty be violated if i flash it?
Click to expand...
Click to collapse
Once you hardspl your device, your warranty is void.. unless you find a way to put the original spl back on your device... whether you flash a custom ROM or not is immaterial.
But please note that it is my personal opinion, but:
1. I have a Vox for nearly 4 years now... never needed to send it to service centre... only had to change the battery once... that too last year.
2. I had a Gene for more than 1.5 years and sold it to a friend of mine (who used it for 6 months till he lost it)... without a glitch.
3. Using my touch2, flashed it within 1 month without caring for the world (BTW I am not a millionaire... if I was, I would go for TP2 ).
If you want to try new stuff... you have to take the risk.
Best of luck in enjoying your Touch2 right now... or waiting for the warranty to get over
Hey.. Please, can I anyone Help me out and tell me, is there any way flashing ROM through Memory Card.. I have read somewhere on XDA..
I had HTC GENE(P3400i), And I flashed that many times.. But now I'm using HTC Touch2 (T3320 Special Version).. And I want to flash this too..
My Problem is.. Someone told me that after flashing my Touch2 I won't be able to play FM Radio.. Is it TRUE.?
And Please tell me the Procedure by which I can safely Flash my ROM..
First, make HSPL to hack the phone, second choose a ROM from all of the roms in this section, you can put it via data cabel.
mirost1 said:
First, make HSPL to hack the phone, second choose a ROM from all of the roms in this section, you can put it via data cabel.
Click to expand...
Click to collapse
Thanks, But I'm afraid that I have T3320, Can I flash the ROM for T3333.?
Baadshah555 said:
Thanks, But I'm afraid that I have T3320, Can I flash the ROM for T3333.?
Click to expand...
Click to collapse
yes you can.i have the same model and flashed almost
ALL the ROMS available in the ROM section of MEGA
and all work great!!
so go ahead and enjoy yourself.
Baadshah555 said:
Someone told me that after flashing my Touch2 I won't be able to play FM Radio.. Is it TRUE.?
Click to expand...
Click to collapse
Which crackpot told you that ????
Mod. edit: not dev related, moved to general
rakesh_4utoo said:
and there is no possibility in near future because i am coordinating with Jockywilson for the HSPL from last 10 DAys and finally failed to use HSPL
Click to expand...
Click to collapse
I never knew my model was 3320, I used jockey's HSPL, been using custom ROMS from here, all works fine