Database Users

XDA IIi & CLock

Hi Does anyone know how to get the clock on the top right hand corner, i hand this on my XDA II...cant seem to get it on my XDA IIi
as always thanks in advance.
nya

http://wiki.xda-developers.com/index.php?pagename=BA_Hacks
read this?

yep 2 ways - first is to install the device without the O2 crap software (in corporate mode) - you will need the code 0506 to get this to work.
The other is it change the following in the registery:
HKLM\SOFTWARE\Microsoft\Shell Binary TBOpt="13 00 00 00"

GPRS auto disconnect for battery saving

Hi Guys,
for everyone who wants to set GPRS auto disconnect timeout without using 3rd parties' software...
HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings\
SuspendResume = GPRS_bye_if_device_off
CacheTime = xxx (where xxx are seconds before auto disconnect, for me the best value is 60)
Bye.

Marco, this is a very useful tip. But would you tell me where i can put the command lines??
Thx
Maggie

marco, i have found the hkey_local_machine. Thx.
However, I cannot find the directory ConnMgr\Planner\Settings under \Comm
Please help.
I am using 2003SE, O2
Thx

Marco, this is a very useful tip. But would you tell me where i can put the command lines??
Thx
Maggie

Sorry for not prompt reply... :S however i don't know how gprs management works under 2003SE...
Sorry...
Did you try to look for SuspendResume value anywhere in the registry?

ta-da!
great tip! i've been looking for this for a while.
so i decided i'll create a cab file, to use with my extended rom!
i've created two files: for 1 minute disconnect, and 5 minute disconnect.
here you go.

thanks shlomki for ur worked

excellent... thanks

This works fine for me !!
Very Happy now!!
I'm using WM6 (official one)

It works for me on WM6 too.
However, I am trying to integrate this to my own cooked ExtROM. I am new at the cooking process. So, I need someone's help to get this done.
Here is part of my oem.xml...
========================================================
<characteristic type="Registry">
<characteristic type="HKLM\Comm\ConnMgr\Planner\Settings">
<parm name="SuspendResume" value="GPRS_bye_if_device_off" datatype="????"/>
<parm name="CacheTime" value="60" datatype="integer"/>
</characteristic>
</characteristic>
========================================================
This is what I have so far. However, because REG_MULTI_SZ is one of the less used key type. I am having problem figure out what to put as the "datatype".
Can someone please help me on filling in the "????" part?
Thanks.

Cab file changes the registry but device still does not disconnect
Any suggestions? It is 60 seconds and not 60 minutes - right?

I have installed the cab file and the registry has changed, however the GPRS still does not turn off - any suggestions?

shlomki said:
great tip! i've been looking for this for a while.
so i decided i'll create a cab file, to use with my extended rom!
i've created two files: for 1 minute disconnect, and 5 minute disconnect.
here you go.
Click to expand...
Click to collapse
shlomki,
what can i say? I have been looking for such an approach since I have got my new Touch Cruise (2 weeks now) and finally I found your cabs...many, many thanks!
keep up with the good work!!!!

Great! TIP! HTC have these feature but I flash with cookrom..

thanks a lot

Nice. Does this also work with 3G connections? Specifically UMTS...

Great! It works on the lg ks20 for the 3G connections.

this doesnt work, any ideas? Registry has changed to:
CacheTime 0X3C (60)
CoeffBandwidth 0x10000 (65536)
CoeffCost 0x10000 (65536)
CoeffLatency 0x10000 (65536)
RetryCount 0x1 (1)
SuspendResume GPRS_bye_if_device_off
VPNCacheTime 0X3C (60)
Thanks

I was wondering... after changing this registry entry (the CacheTime one) what is the orginal value for this incase you ever wanted you ever wanted to change it back to default? I would have looked myself but I ran the .cab file before thinking to check the registry and see what it was... Thanks in advance!
I wanna say that it is set to "0" but I just wanted someone to confirm this for me before I tried to write a .cab file to get it back to default settings.

Warning!
These cabs work for "normal" sw running in Win Mobile, but it stops Java apps running under jebed.exe to connect and get data. A connection is established, but it is immediately closed down, re-opened - closed done, re-opened - closed down and it goes on like this. Had to uninstall.

clear_notify

does anyone have clear_notify.exe or equiv that will run on hermes? the version i run, when deleting duplicates says processing 67 of 66 and never completes. i'm hoping this will restore my alarm notifications but i'm not holding my breath

warmkiwi99 said:
does anyone have clear_notify.exe or equiv that will run on hermes? the version i run, when deleting duplicates says processing 67 of 66 and never completes. i'm hoping this will restore my alarm notifications but i'm not holding my breath
Click to expand...
Click to collapse
???? It works here with no problems on my TyTn you are referring to the Scary Bear Software right?
Update: I have check notifications working not clear_notify.exe sorry

yeah, sorry, i meant Check Notifications. clear_notify does nothing

warmkiwi99 said:
yeah, sorry, i meant Check Notifications. clear_notify does nothing
Click to expand...
Click to collapse
It works on my TyTn then, it is a leftover from my Kjam that I just copied to my micro-sd card and run it after configuring options (only 2 of them) it is a standalone program no need to install do you think if I send it to you would it help?

i downloaded it from scary bear but i get this 67 of 66 or whatever dialog that never completes. thanks for your offer though

I have used this on my old qtek 9100 and now on my TyTN without problems.

warmkiwi99 said:
i downloaded it from scary bear but i get this 67 of 66 or whatever dialog that never completes. thanks for your offer though
Click to expand...
Click to collapse
I have V1.9 what version are you running?

V1.9
i dowloaded Pocket Mechanic (which is very good) and cleared them with that. Check Notifications now works OK - although it had nothing much to do i suppose
thanks for your help

[REQ] GPRS/DATA auto disconnect program?

Hi all, on my previous P3600 I was used to use a small application that was able to disconnect GPRS/data connection after a few (settable) minutes of inactitvity (gprs autodisconnect from Ervius). Unluckly this program doesn't work on my new Diamond. Is there any working application or tweaking for Diamond?
Thanks in advance,
Ciao, Andrea

I would also like to second this request. It's useful for those times when we are interrupted and forget to disconnect our data connection.

Advanced Config and DiamondTweak does it.

kien said:
Advanced Config and DiamondTweak does it.
Click to expand...
Click to collapse
I installed Advanced config, but I'm not able to find where and what change, can I have a hint?
Ciao, Andrea

Its in Menu (right soft key) then connection settings, hth.

kien said:
Its in Menu (right soft key) then connection settings, hth.
Click to expand...
Click to collapse
Thanks for your reply, it was already set to disconnect after 3 minutes, but still doesn't work
Ciao, Andrea

Genius2000 said:
Thanks for your reply, it was already set to disconnect after 3 minutes, but still doesn't work
Ciao, Andrea
Click to expand...
Click to collapse
Andrea,
Did you try phoneweaver from SBSH ?
It is a profile manager where you can set up (inside the profile) to change nothing except connect and disconnect data connections.
Every profile can be activated on a time basis (e.g. every day @ 7.00) , on a event basis (e.g every time you run Activesync) and manually with a predefined duration (e.g 1 hour)
Moreover it does many other things (it is a realy complete profile manager) ... and works great on my Diamond.
Ciao

dave said:
Andrea,
Did you try phoneweaver from SBSH ?
Ciao
Click to expand...
Click to collapse
Hi Dave, I just downloaded and installed phoneweaver trial version, for my needing is too much, I spent a few minutes to study various options, but I wasn't able to find the specific option I'm looking for (disconnect after x inactivity minutes)
Thank for your suggestion.
Ciao, Andrea

I found that using Advanced Config it disconnects after x minutes (mines set to 1) but it disconnects faster exiting opera but doesn't disconnect at all after checking hotmail.

kien said:
I found that using Advanced Config it disconnects after x minutes (mines set to 1) but it disconnects faster exiting opera but doesn't disconnect at all after checking hotmail.
Click to expand...
Click to collapse
I have the same problem, disconnects fast using Opera, and doesn't disconnect after checking email or update weather forecast.
Ciao, Andrea

I use GB soft tweak, never had any issues

pwoyorkie said:
I use GB soft tweak, never had any issues
Click to expand...
Click to collapse
Could you please explain better?
Thanks, Andrea

There Is Also A Program Called Nodata Which I Have Install And It Works

Genius2000 said:
Hi all, on my previous P3600 I was used to use a small application that was able to disconnect GPRS/data connection after a few (settable) minutes of inactitvity (gprs autodisconnect from Ervius). Unluckly this program doesn't work on my new Diamond. Is there any working application or tweaking for Diamond?
Click to expand...
Click to collapse
have you tried Spb GPRS Monitor?

pwatts1977 said:
There Is Also A Program Called Nodata Which I Have Install And It Works
Click to expand...
Click to collapse
I wasn't able to find where download Nodata
Ciao, Andrea

stegg said:
have you tried Spb GPRS Monitor?
Click to expand...
Click to collapse
Hi read GPRS Monitor features and doesn't seem it does what I need.
Ciao, Andrea

Solution here:
http://www.vandebilt.com/2008/04/20/auto-disconnect-gprs-in-wm6/

From external link said:
1. Miroslav Georgiev - September 2, 2008
Hi, I need to disconnect the GPRS after a minute and I have installed this cab file on my device. I have checked in the registries and the values are the correct (SuspendResume = GPRS_bye_if_device_off and CacheTime = 60 ), but my device still stay connected one minute after I have stoped to transfer data. Could anyone told me why this trick does not work on my device. It is HTC Touch with Windows Mobile 6 ?
2. Miroslav Georgiev - September 2, 2008
I forgot to ask something… the value of the registry is “GPRS_bye_if_device_off” is this means that the device should disconnects only if I turn off the device from power button ?
Click to expand...
Click to collapse
Seems not work, perhaps they are the same reg value of advanced config.
Download NoData

NoData disables your data connections, it doesn't disconnect automatically after a set period.

Pitchb3nd said:
Solution here:
http://www.vandebilt.com/2008/04/20/auto-disconnect-gprs-in-wm6/
Click to expand...
Click to collapse
Thank you for the link, i investigated a bit and discovered that in my registry is already set as per your suggestion, also I discovered that if the phone is NOT in sleep mode, so the display is ON, the auto disconnection works fine, but if the display is OFF the auto disconnection doesn't work at all, so, I think, seems something related to the sleep mode.
Could someone do the same test?
Thanks, Andrea

[Help] How do i get in HKLM files?!?!

I see everwheres HKLM/xxxx/xxxx/xx/xxx i cant figure out how to get there!
Can somebody give a noob a hand?

drhades said:
I see everwheres HKLM/xxxx/xxxx/xx/xxx i cant figure out how to get there!
Can somebody give a noob a hand?
Click to expand...
Click to collapse
That's the location in the registry. You need software to get into the registry like Resco or Total Commander (I think). Just search for "Registry editor for windows mobile".

ya, i got total commader now what?

HKLM stands for "HKEY_LOCAL_MACHINE" or however it's denoted in the registry. I think this is all the person is looking for. now things should be clearer. Other acronyms stand for the other sections.

ShinigamiEyes said:
HKLM stands for "HKEY_LOCAL_MACHINE" or however it's denoted in the registry. I think this is all the person is looking for. now things should be clearer. Other acronyms stand for the other sections.
Click to expand...
Click to collapse
Absolutely correct. Use caution being a noob. Changes can seriously impact your usability of your device. If you're not careful, you could have a $1,000 paper weight. This board has a lot of talent, and a lot of people that are willing to offer a helping hand (even to the noobs). Ask before you do.
Registry changes don't come with backups!!!

Actually, your wrong. Messing with teh registry will NEVER brick your device, only force you to perform a hard reset

ShinigamiEyes said:
HKLM stands for "HKEY_LOCAL_MACHINE" or however it's denoted in the registry. I think this is all the person is looking for. now things should be clearer. Other acronyms stand for the other sections.
Click to expand...
Click to collapse
It help a little, but i mean when im at the start, the very beginning, where do i go? Like when i see all my first folders, because i cant find HKLM.

drhades said:
It help a little, but i mean when im at the start, the very beginning, where do i go? Like when i see all my first folders, because i cant find HKLM.
Click to expand...
Click to collapse
In Total Commander go to the root, the highest level. There you'll see a \\Plugins 'folder' with some Total Commander plugins. One of them is the registry plugin, which enables you to read and edit the registry, like the HKLM keys and values. Good luck!

Thank you
Thank you so much Mandragore, you have know idea how much you have helped me... My all your wants and dreams come true!
- Douglas

this info compied from a thread discribing how to correct a problem answering calls:
http://forum.xda-developers.com/showthread.php?p=3612553#post3612553
collapsed said:
OK, I got it!!
FIX:
http://forum.ppcgeeks.com/showpost.php?p=458469&postcount=1
Windows registry problem:
HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume
Set to #777, if it says something else.
Soft Reset.
BOOYAH!
Click to expand...
Click to collapse
i'm having the same problem answering calls. i've downloaded total commander v2.0 so i could try and correct the registy issue as discribed above. when i go in to edit the registy file i get something that looks like this;
47 00 50 00 52 00 53 00
5F 00 62 00 79 00 65 00
5F 00 69 00 66 00 5F 00
64 00 65 00 76 00 69 00
63 00 65 00 5F 00 6F 00
66 00 66 00 00 00 00 00
i have no clue what i'm looking at there to be totally honest. i have no idea how to change registry and have never done anything like this before. i just want to be able to answer my calls! i see no place in that bit of code where i should change anything to #777. can someone please for god's sake help me?!?!
btw, my phone is an Alltel Touch Diamond if that makes any difference...