Database Users

8125 is toast what happnened

Turned on my 8125 today and it stays on the screen with the verison of the
rom(etc) showing. I did a soft reset ... same thing.......I did a hard reset and it said format fail...... can anyone tell me what is going on here. am i lost ......can someone tell me an alternate way to get to the bootloader so that I can re-flash the rom........ I can't even get the phone to go into windows.... please please help. or am I out of 400 bucks for this phone. .....

Get into bootloader by with the device off - press and hold camera button and press power on. Multicolored bootloader screen should appear. Connect via usb - as long as you have a small usb symbol bottom left of screen you can reflash phone. (does not need to be connected via activesync to do this)

okay now look what happned
Okay thank you it worked and I was able to flash the rom. The flashed completed but it still freezes at the start up screen it says the following:
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1
its stuck onthe Cingular logo screen. When I try to do a hard reset it give the error message
format has failed.....
Can this device be saved?

I gather the device has been upgraded to the leaked aku2 rom. You may have a corrupt rom.
I would try downgrading to the original stock rom ftp://[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe

more errors
it wont do the rom flash says something about wrong nbk

Your device is still cid locked then with that rom version you have to goto http://www.imei-check.co.uk/ and get it cid unlocked - cost £20 though. Your rom is too new to use faria's method that only works on rom's 2.21 and below.
May be an idea to post on wizard upgrading forum as they may have more ideas before paying out your money.

here is what i did
Well still no reply from the seller so I called the credit card company and dispute the charge. i have copies of the guys ad... and copies of the rude emails he sent me. The credit card company told me just hold on to the defective phone and the emails and they will take care of it.. Apparantly the seller was working from a Post office box he was pay apal verified. I just hope no one else falls victim to this guy.

Can my SPV M600 be saved? [stuck in 3 color screen]

Latest update: http://forum.xda-developers.com/viewtopic.php?p=363228#363228
Let me first say: I am unsure if my SIM is now unlocked and if it has a CID check. Therefore I'm unsure if the info in the related topic http://forum.xda-developers.com/viewtopic.php?t=62496 applies. Therefore I'm posting this new topic.
I recently got a Orange SPV M600 which as far as I understand is a HTC Prophet. I am totally new to PDAs but wanting to use it with my T-Mobile sim and with a fair amount of computer knowledge on board decided to unlock it myself using imei-check.co.uk/m600unlock.php
I ran the program and it said the sim was succesfully unlocked. However when I tried to power on the device after that, it was stuck at the 3 color screen only displaying the values:
IPL 2.10.0001
SPL 2.10.0001
This gave me quite a scare because the device is brand new. Soft and hard reboot bring me back to the same screen. This morning I tried running the tool again and the unlocked failed giving me a message that key / imei do not match. After rebooting it now also shows the value RUU at the upper right corner of the screen.
I read some of the posts on this forum and did a little research on Google. I think I know what my next steps should be but I'm terrified to toast my M600.. I already fell in love with it! Could you guys give me feedback before I try the following?
* Download and unzip:
xda:[email protected]/Prophet/Shipped_Complete_Updates/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
* Follow the steps on http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Should that work?
PS: what does the RUU value mean and why did it appear after my 2nd try?
Thanks in advance guys!

Have you tried contacting IMEI-check's support?
RUU is. IIRC, radio unit upgrade and it should not have appeared.
Don't flash the rom, you might need to send it back to orange / HTC and there is no official orange downloadable rom as yet so if the device boots to 'dopod' or whatever they'll know you've messed with it. If the key does not match sounds like the unlocking has screwed your imei. Does the IMEI the app now recognises match the one you paid for the unlock for or the one on the back of the unit/ box?
Richard

IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..

MeneerPaul said:
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
Click to expand...
Click to collapse
Typically helpful....
I do not think it co-incidence that you are doing a flash operation ( unlocking) and now the device will not boot. It should reboot after unlocking according to their documentation and if it went to the tri-colour screen something was amiss after the unlocking then, quite possibly becuase of it. The unlock completed succesfully the first time then?
Don't flash the dopod rom, if the IMEI now has a mis-match you may need to send it back to orange for repair / reflashing. They will be able to tell if there is a dopod rom on there and may refuse warranty - I wouldn't mention the unlocking if I were you. There is no official orange rom you can try :-(
Richard

I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?

MeneerPaul said:
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
Click to expand...
Click to collapse
In the UK at least you do not need a receipt for the phone - it is based on seriel number.
http://service.htceurope.com/
Once you have tried flashing the other roms they can tell you have been flashing it and may not give warranty service, but hopefully all it really needs is a rom anyway. My warning is just in case it is not the rom that is the issue and you need to send it back.
When you run imei-check's app now what IMEI does it give for the device?
Richard

Good question, I just checked and the IMEI in their tool gives me the same one as I wrote down before the operation. It is the same as on the box and as the one I payed for to get the key for and used the first time around.

I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?

MeneerPaul said:
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
Click to expand...
Click to collapse
Get back to IMEI-check and ask for more help? They may claim that the unit was faulty before unlocking but if so how could the unlocker run? Or try posting at www.modaco.com to see if anyone there has any ideas.
Which country was the device supplied in? Did you check the seriel in the link I gave? If it's from the UK you could send to a friend or collegue to return under warranty without paperwork ;-)
Sorry.
Richard

Well at least we made progress, a hard reset now let's the device boot but.. after I went through the settings I pressed start and it automaticly powered off.
I then inserted my T-Mobile simcard and rebooted again to find myself in the tri-color screen. Another hard reset once again let me reboot but during the boot of Windows Windows it says 'Data crashes. Please contact your service center.'

Where in the Netherlands do you live?
I have succesfully dopotted two M600 phones and I have had one repaired by Orange, for broken speaker. They did not seem to care that I flashed it to dopod.
I might be able to help you out on this one.
send me an e-mail on [email protected]
Thanks,
Robin

O, and I unlocked both also....

hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br

chowdary said:
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
Click to expand...
Click to collapse
How did they try to unlock it?
Richard

hi
i couldn't speak to the guy who tried to unlock it, i spoke to his collegue and all he could say is that he tried to unlock by logs
now he couldn't tell me what did he use
i have tried to hard reset it but it comes back on that screen
:? :? :?

Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!

robincop deel 2 said:
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
Click to expand...
Click to collapse
thanks for your reply
it will be very helpfull if u could give us the link to download this file
as i am new with pdas
thanks

Read the prophet forum. You will find the link there in a few seconds.
Success

after doing search this is what i found
RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
please could u tell me if that is ok to flash
the other thing is i can't connect to the pc
active sync is not picking up
phone is stuck in three colour screen
and all i can c is
IPL 2.10.0001
SPL 2.10.0001
any idea for that
THANKS

you should load:
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID

O2 Orbit crashed after PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite upgrade attempt

HI all,
I'm desperate...
I recently bought an 02 Orbit that was supposed to be unlocked.
So I downloaded PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe, unpacked it and double clicked on UpgradeRom_P800W.bat
A dos installation routine started, then I performed a hard reset by pressing the softkeys + stylus reset.
and now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device doesn't boot :-(
I'm completely desperate... I had my Orbit working 1h only and now I still have my eyes to cry.
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device is connected....
I tried to enter the bootloader but I don't understand how I could do that (by the way what do you guys mean by the record button? where is it?)
Could someone explain me how I can recover my crashed device please ?
Thanks in advance

ok I've found the record button and managed to enter the bootloader (red-green-blue screen right?). But it doesn't help. My device is not recognise by my PC anymore, no connection.
The problem is that I didn't make the procedure on IMEICHECK because the vendor said my Orbit was already unlocked. I know, I'm stupid, I should have....
Anyway, now I've my 30€ UNL file,
I've edited a ROM with the hex program, I've change "BsaD5SeoA" with "IMEICHECK save exe file" (I told you I'm stupid, or I didn't exactly understood what you mean, because I don't have any IMEICHECK.exe file)
I tried to launch a ROM upgrade but my device still not be recognised by my computer, even in bootloader mode.
Same **** when I try to launch the C3v1Unlock, it says no device connected.
Please, if you have anything to help me......

After i read this THREAD who explain how to repair my problem ...But it dosent work for me
When i want to flash it, it tell me :
INVALID MODEL ID ,with : RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEon gsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
INVALID UPDATE TOLL ,with : _ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
And after have made the TUTO !
Click to expand...
Click to collapse
I saw this post on an other thread... I am having the same problem... I bought artemis from ebay and the seller told me that it was unlocked... But i can't flash it with these ROMs... Did you find a solution? Is it really unlocked?
By the way when the window that tells me "INVALID MODEL ID" shows up at the bottom and to the right of the window there is i big number... Do you know what this is?

Same problem here
I have THE SAME problemhere. The same message on the boot screen. It seems that we are not able to use our XDA ORBIT ;( any more
At least we can download oreginal XDA Orbit english or German ROM OR if someone write RUU for Xda Orbit. Than would be easy - you just go to boot loader and you start your RUU, or easily put .NBH file to your micro SD and flash it from micro SD.Too bad I can just cry over my Xda Orbit. PLEEEASSEEE HELPPP
I also heard that FTP ROM site is going down ---- XDA GENOCIDE!!! What ARE you doing people!

Try the orbit ROM on ftp if it is still there
When a seller says a device is unlocked, all they mean is that you can use any sim card of your choice. To be able to flash another rom you need to CID unlock it. For the Orbit/Artemis family we only have imeicheck selling the program for unlocking cid.
My advice would be to look for the orbit rom on ftp. If it does not work, check with imeicheck if their program works when device is in bootloader mode, and pay them and download the specific application for your device. Good luck

I had a problem with my Orbit when I tried to change the Rom to the PDAMobiz one. I ended up recovering it by...
1 - Hard Reseting it.
2 - Connecting it up to the PC then running C3v2Unlock note v2 from the the IMEICheck site. This made the screen on the Orbit go bright white.
3 - Downloading the the Rom listed in this thread and following the instructions with in the same
It means that my Orbit is seen as a HTC P3300 but it feels quicker. You do need the UNL file from IMEICheck to keep it unlocked. But it worked for me.

Yes I tried everything in bootloader mode,
the C3V2 Unlock program launched but after detecting the device, it says my device is corrupted with a kind message "[probably by your fault]" ;-)
So guys, everyone who's trying to upgrade : CID UNLOCK YOUR PHONE BEFORE DOING ANYTHING, and carefully read the (excellent) tuto.
FYI, here's the discussion I had with Imeichek guys :
------------------------------------------------------------
Hi,
I'm a little desperate and I hope you'll be able to help me...
I recently bought an 02 Orbit that was supposed to be unlocked (I didn't know the difference between SIM lock and CID lock)
I understood, too late, that I should have ask for my UNL file prior to do this stupid "direct upgrade" I did...
Here are the facts :
1- I didn't follow the instructions found on http://forum.xda-developers.com that explained how to order the UNL file and Unlock the device unlocked
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
4- A dos installation routine the started, then when asked, I performed a hard reset by pressing the softkeys + stylus reset.
now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I managed to enter the bootloader but my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED
So please, if you have any information or procedure I could try to fix my device, I would really, really, appreciate, especially after my 30€ contribution ;-)
Best regards
---------------------------------------
2007/2/17, [email protected] <[email protected]>:
Hello,
NO PANIC. You can fix the device. You have to find the CORRECT / a matching ROM for your device. For this you have to know what ORIGINAL phone it is (O2 Xda Orbit UK?)
Tell us what device it is and we try to assist you in fixing it.
Regards,
IMEI-CHECK Team
-----------------------------------------------
Thanks for your fast answer!
Yes it's an original phone, a brand new O2 Xda ORBIT, in box
Regards
Thomas
----------------------------------------------
Hello,
the language is important. Is it UK version?
Regards,
IMEI-CHECK Team
-----------------------------------------------
yes it's a UK version
-----------------------------------------------
Hello,
hmm, sorry to tell you but for the UK version there is no official ROM update available right now.
All you can to do fix it NOW is to send it to repair (service center).
For our customers we offer to fix the device for free (you only have to pay for shipping costs in both directions). We are located next to Glasgow UK. In case you are interested let us know.
Regards,
IMEI-CHECK Team
-------------------------------------------------
Ok,
I guess I don't have any other choice.
Wich ROM will you install if there's no official O2 Rom ?
What is the procedure, what's your adress, and how much will cost the return ?
Thanks a lot
Thomas
-----------------------------------------------------
Hello,
- we can install any ROM of your choice (it only needs to exist)
- we also will unlock the device and you can install ANY ROM you life afterwards
- the device needs to be opnened to use some special hardware to access the flash chip directly
- shipping back to (UK/EU) with INSURED Royal Mail is apx. (7 GBP/15GBP) depends where you are located.
Regards,
IMEI-CHECK Team
---------------------------------------------------------
ok thank you,
but will you be able to flash an O2 Xda Orbit with the french ROM that comes with the (Artemis) HTC P3300 sold in France ? this is exactly the same machine.
Regards
---------------------------------------------------------
Hello,
yes we can flash ANY available ROM to it.
Regards,
IMEI-CHECK Team
----------------------------------------------------------
here I am,
I guess there is nothing else to do.
First I want to thank you all for trying to help, then thanks to IMeicheck, they replied very fast and found a solution, even if I won't hae my Orbit for several weeks.

2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
Click to expand...
Click to collapse
Maybe you should not have unpacked the file Just clicking on the file icon starts the procedure, which does some checks before actual upgrade starts.
I have switched so many times between the pdamobiz roms and the HTC one so many times I've even lost count

It's been easy for you... because your phone was CID unlocked ;-)

Well i had HTC ROM and now i have pdamobiz... That means that my artemis is cid unlocked???

my orbit is stuck on boot screen exactly as manples'. i tried to flash pdamobiz custom ROM. i can enter bootloader. can u tell me plz to what change "BsaD5SeoA" with "IMEICHECK save exe file" from imeicheck i've got c3v2unlock.exe & unl file. i tried flash it tru sd card-nothing. I've got o2orebit (ARTE200) please hlp

Psrejic, does your Orbit work again? I have the same problem. Can't get passed the splash screen because I flashed it with the PDAmobiz rom.
Only way to go is thrue bootloader. Did the SD flash work for you?

Same problem here Waiting for any solution ...

Only solution so far is imei-check service, witch will cost you: Price of sending to them: (UK) Then 20£+15£(aprox) to pay them for unlocking and repairing + sending back.

That's what I've done,
I received an email where they confirmed the reception of my device and that they flashed it with a new Rom. My device is supposed to work, it's great ! can't wait to try it.

Hi manples ...
You send it to imei-chek?

My Orbit works again! ... but not with a software solution.
I returned the phone to the O2 shop and they gave me a new one immediately. I didn't mention my PDAmobiz Rom upgrade offcourse.
It isn't the nicest way to deal with the problem, but when o2 flashes the rom on the phone they can sell it again.
Then I did the Imei-check solution. Worked and flashed the dopod rom on it.

hi to all yesterday I was your siimilar problem (I've try to install teh powermap rom...) so my Orbit O2 (original german rom) still only in boot screen, today I've try to install this magic rom:
art_tmouk_11311001_024990_wwe_ship.rar
I've press the comm manager button + power button + soft reset and my orbit it's enter in bootmanager mode so, i've install the TMobile UK rom (I was the O2 german rom...)
only in this mode my orbit work again.
bye

xda orbit stuck
i flashed my xda o2 orbir german rom with PDAMobiz_Dopod_P800W_AKU301_v1.1.2 and now it wont start at all i tryed to enter bootloader but i cant ( voice key and reset ) its stuck at o2 logo and :
IPL 3.04.0001
SPL 3.04.0000
GSM 02.00.90
OS 1.20.0.0
DOSE ANYBODY have a solution ? please help me !
keep up the good work ! thanks

Bricked Tytn

I had a BSOD on my laptop during a radio flash and was left with a phone that got stuck on boot screen, with NO GSM on the display and no KTIL possibilities. Sent it back to Brightpoint (HTC contracted repair shop) and they wanted 350 euros to replace the system board.
So before i sell as scrap on ebay - i wanted to check that i hadnt missed any miracle cure that may have been found.
Thx

try having a look in the Upgrading forum http://forum.xda-developers.com/forumdisplay.php?f=306
am sure there are a few unbrick topics there, think i remember seening some in there once
try here - http://forum.xda-developers.com/showthread.php?t=325018&highlight=No+gsm*

Thanks for the reply - have tried pretty much everything. My main issue is not having KITL

nmonger said:
I had a BSOD on my laptop during a radio flash and was left with a phone that got stuck on boot screen, with NO GSM on the display and no KTIL possibilities. Sent it back to Brightpoint (HTC contracted repair shop) and they wanted 350 euros to replace the system board.
So before i sell as scrap on ebay - i wanted to check that i hadnt missed any miracle cure that may have been found.
Thx
Click to expand...
Click to collapse
Are you on Hard-SPL ? Could you use PC to access the Hermes ? If so, try the method to flash the ROM with a memory card method.
Good luck

Memory card flash
Thanks QQ88 - I will give it ago when I get the phone back!
If that doesnt work is there anyone with serious phone skills (thinking of pof-a-likes here) wants to earn 100 euro to help get this phone back to life then PM me.

I''ll give this a shot.
nmonger said:
I had a BSOD on my laptop during a radio flash and was left with a phone that got stuck on boot screen, with NO GSM on the display and no KTIL possibilities. Sent it back to Brightpoint (HTC contracted repair shop) and they wanted 350 euros to replace the system board.
So before i sell as scrap on ebay - i wanted to check that i hadnt missed any miracle cure that may have been found.
Thx
Click to expand...
Click to collapse
This is a tricky one but I believe that you can use the same flash file that you were using and just try this:
You should know your SPL version before going too far with this. Hopefully you can get that info by trying to boot it and if it can get to the very first splash screen with the red text, it should show it there.
Turn on the phone and let it try to boot ... Hold down the Power and OK buttons at the same time and while holding those buttons down, hit the reset button at the bottom of the phone and you should then be given the multi-color weird screen that's given right before the flash. Then, connect it via USB. Load up the flash software and it should ask you which version you're running of the SPL, select it and then click next. Auto-detect won't work if I remember correctly. Then just push forward and it should go through.
If all else fails, look up Mr. Vanx's information ... he's quoted all over this site and has his own site that has a LOT of information about bricked hermes phones.
GOOD LUCK! I hope it works.

Had a similar problem last week. Download the ROM at the top of the link below and it should unbrick your phone. It worked for me
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Good Luck

Thank you to all that gave their input. Can confirm that I have tried all methods incl. SD flashing but due to corrupt CID and SPL 1.09 it is time to wave the white flag and give up.
Will keep up with the threads to see if anyone manages to find a way to resurrect TyTns with corrupt CID and SPL 1.09

Help me fix my wizard and I'll give you 10$

Okay I'm having problems with my wizard.
It freezes at the splash screen.
It won't hard reset "Format is Failed"
And flashing billions of roms does no good.
Here's a solution that's supposed to work
http://forum.xda-developers.com/showthread.php?t=276963
but your device has to be cid unlocked wich mine aint.
And I can't unlock it with lockwiz, because it won't start up.
I could use imei-check, but don't want to pay 40$
If you follow the instructions in the link above and send me the minisd so I can reset my wizard, and it works, then I will return your minisd with a 10$ check.
Leave me a message if your interested in helping.
But, because i don't want a billion people sending me blank minisd cards I'll only pay if it works. If it don't I will still return the minsd.
Please help a guy out.
Thanks.

Cmd1991 said:
If you follow the instructions in the link above and send me the minisd so I can reset my wizard, and it works, then I will return your minisd with a 10$ check.
Click to expand...
Click to collapse
I faced the same situation with my wizard..The only solution is to pay the 40$. If the device is not CID unlocked it can not boot using the sd card.
I unlocked my phone using imei-check and then my wizard worked like a charm.
It is simple: If you do not pay for the CID unlocker your WIZARD will rest in peace for ever..

Have you tried this? http://forum.xda-developers.com/showthread.php?t=294107
Maybe your SD is to blame. Try it without the SD and you may get lucky. If it works I would format the SD card before rebooting the phone.

Okay so i just realized it has to be cid unlocked even to back it up from the minisd.
So does imei check work with phones in the U.S.?
Anybody know?

bootloader?
what version of the wizard do you have? (what does the ipl/spl stuff display?)
try holding the camera button down when starting up to enter the bootloader, then connect the usb cable and flash.
Good luck!
Matt

1.Download the original/official WWE ROM from your provider's website
(you may need to register the phone with the provider online to be able to download the ROM- usually the phone registration and official ROM download is free)
The WWE ROM allowes the device to be reflashed - even if the phone is CID locked.
2.Connect the phone to any XP machine using USB
3.Start the phone in bootloader mode (3 colord band with IPL/SPL in top left and USB in bottom left will be displayed)
To start in boot loader mode -->Press and hold the camera button, simultaneously press the soft reset button with stylus.
[Soft reset push button is located in the middle of camera button and infrared port (close to infrared port)]
4. Re-flash the phone by running the dowanloaded ROM from USB connected XP machine.
Hope this helps.

I earn 10 pound men
I have your answer BUY A NEW ONE!!!!!!
hahahahaha
Like ungry dogs huh?! 10 pounds .-.- 10 pounds

If you can get your phone into the bootloader(hold camera then soft-reset), you could try to flash it with:
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
maybe that will work, if its flashed successfully you can cid unlock your phone, good luck.