Screen sliding problem - 8125, K-JAM, P4300, MDA Vario General

I have just changed some parts of my SPV Wizard with an O² one, and my screen don't change automatically to portrait/landscape anymore when sliding the keypad.
How can I solve this issue? Anybody knows about the sliding mechanism?
Sina

as far as I know it's a reg.+hardware setup....but you can assign a button to rotate the screen for the time being

Thank you for your advice about assigning a button for screen rotation. That helps me for now.
What do you mean exactly by "a reg.+hardware setup"? Where can I find more details about this issue?

Magnet missing?
Did you have an extra part at the end? Most flip phones use a magnet to tell the phone when the phone is opened or closed.(I wanted speakerphone while the flip was closed on my Motorola MPX-220, this and any-button-answer was a sweet deal when only one hand is available -example..driving-)

Related

rotating "please wait" thing on today screen

Hi,
I have that rotating "please wait" thing on the today screen, and it won't go away... I only changed some meter icons for iLauncher, what could be the problem? (soft reset doesn't solve it)
have u tried aligning ur screen?
strange, it went away by itself. I like self-repairing devices
well...i have similiar weird problem with my wizard as well. i dont have ilauncher installed but whenever i receive call, the screen will switch on and start with landscape mode. i need to wait for a few second before it switch back to potrait and then only i can answer the call. i always keep by keyboard slide in btw.
anyway facing this as well>
praetorion said:
well...i have similiar weird problem with my wizard as well. i dont have ilauncher installed but whenever i receive call, the screen will switch on and start with landscape mode. i need to wait for a few second before it switch back to potrait and then only i can answer the call. i always keep by keyboard slide in btw.
anyway facing this as well>
Click to expand...
Click to collapse
Are you using the supplied case with a magnetic clasp? Since a magnet in the phone is used to tell the hardware that the keyboard is opened many users have reported that simply removing their device from the OEM case has caused this. This is documented over and over again in the forums.
yes. i m using the case.
thank for the info

Rotate Screen

Hi, this is my first question about Qtek 9100
i dont know why, but all the time my qtek start to rotate the screen whiout reason anyone knows how to make this stop?
some time my cel stop to work because of this
thanks
do you have case with magnets?if you do this is the reason!
nasodotcom said:
do you have case with magnets?if you do this is the reason!
Click to expand...
Click to collapse
err... I don't get it... why is this? why magnets?
The magnets activate some sort of a magnetic switch that is normally activated only when you slide open the keyboard. So if you happen to bring any magnets in close proximity of the wizard, it changes orientation.
The case that comes with the wizard has magnets in it, so if the yshould be really close to the case, the screen orientation tends to change.

Is there a way to stop aspec change when keyboard pulled out?

Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
lorrin said:
Does any smart person know if there a way to stop the aspect change when the keyboard is pulled out? (Basically so the operating system stays portrait instead of changing to landscape)
Cheers,
Richard
Click to expand...
Click to collapse
This might help:
http://forum.xda-developers.com/showthread.php?p=1098622#post1098622
Mike
Cheers. I will have a look
Why do you need to turn auto rotation off?
sprice82 said:
Why do you need to turn auto rotation off?
Click to expand...
Click to collapse
same reson I want to
to stop the screen rotation when puling out of my case
elivne said:
same reson I want to
to stop the screen rotation when puling out of my case
Click to expand...
Click to collapse
If I understand correctly you mean when taking the device out of the carrying case. The orientation can change when taking it out of the case due to the magnetic catches in the case operating the keyboard magnet operated switch.
If this is the problem then I suggest using a case with no magnets. (a better solution than disconnecting the switch). This however is not the same as not wanting landscape mode when the keyboard is out as the OP wants.
Mike
I remember getting very annoyed with the phone changing orientation when in it's magnetic case when I first got it. I searched and searched for days to find a setting or tweak to fix it. Eventually, I mentioned to my wife that I need to buy a new case.
She said "why don't you put it into the case the other way round?".
I put it in with the screen facing the belt rather than the magnets, and it's worked fine ever since that way round! Felt such an ass!
Sometimes I don't see the wood for the trees me...
I know it's the magnet doing it
I've tried the following:
1. Buy a new case with only one magnet clip (a magnet clip is more comfortable then scotch or any other solution).
2. Reverse the screen to the back.
None works, I think it's the way I pull it out...
Anyway, the only solution doesn't exist, I can't find a normal belt side case.
So my last resort is to find a way to stop the rotation, I always miss calls cuz the rotation during a call slows the device and I can't answer...
I tried to use that registry hack, I followed the instructions and I do not have the rotate icon..even after two resets. Is there any other way to force your screen a certain way?

Looking for Landscape to portrait Magnet sensor and Rubber stoppers.

Hello Guys.
I was wondering if anybody had any of those little magnets that tell the universal if the lid is open or closed (switch to and from landscape and portrait)
Also if anybody has the little rubber cover stoppers that are on the keyboard half of the Universal (the one that keeps the screen from smacking into the keyboard. (The ones under the FN key and --> key on the bottom keyboard face side) I would be interested in those as well.
Please let me know if anybody has some that they might be able to share/sell.
Thank you guys for everything.

Dissasembly, screen rotate broken

I recently replaced the screen in my 6800 - (I'm out of insurance replacements, and I don't like the Touch Pro Verizon offered me very much.)
The dissasembly and re-assembly went swimmingly - except for the fact that my phone now reverts to Landscape every time it wakes up, as if the switch that detects the sliding motion is broken or disconnected.
Does anyone have any details of where this switch is and how it works? I have heard mention of it being a magnetic reed switch, but I also see a little tab of metal in the slide mechanism that looks like a contact closure point for this.
Any ideas or information?
I know this isn't probably the best answer, but have you looked into software that will rotate the screen? You could then assign that software to a button and rotate that way.
Yeah, I have "Screen Rotate" mapped to the messaging button, but it still reverts to landscape every time the phone goes to sleep, even if I set the screen mode to "portrait" in the settings.
I took it apart all the way again last night, I still can't find any sign of the mechanism it uses to detect open/close.
There are some metal ground clips on the lcd side that I think it uses to sense its location. If you slide the phone out you will see a gold colored clip in one of the slide groves.

Categories

Resources