My o2 atom is dead. i was yesterday upgrade o2 rom normally.. When finished unplug my atom. and turn on itself. view screen alligment but i did push cam+reset . later i saw bootlooder mod my atom. Again i d push power+reset. And my atom is not work. (dead) i m remove battery wait but not work. When i plug usb my atom s red light on. just it. if u know any repair tool software or method please tell me .
Thanks..
Try this: Remove battery for an hour then put it back and push camera+reset. Don't push power button because it will start OS and your PDA hangs immediately.
If you can turn on your Atom by pressing camera+reset, try to reflash it.
Good luck!
dead atom exec
hi thaibv,
i woke up this morning and removed my atom exec from my connection with the usb on my computer. it immediately started rebooting several times. after this it just died. i am able to get to the bootloader, but my computer does not recognize the unit. how do i reflash if activesync won't connect? thanks for your help in advance.
al
alc said:
hi thaibv,
i woke up this morning and removed my atom exec from my connection with the usb on my computer. it immediately started rebooting several times. after this it just died. i am able to get to the bootloader, but my computer does not recognize the unit. how do i reflash if activesync won't connect? thanks for your help in advance.
al
Click to expand...
Click to collapse
This has happened to me, too, and man, did I freak out! I don't exactly remember what I did but I think I first removed the battery and replaced it back. When that didn't do the trick, I did maybe 2 or 3 hard resets and then restored my backup file (learned from previous mistake already, so I regularly do backup using SPB Backup). That worked but found out something was wrong with my SMS Inbox (menu of messages won't appear; reappears when I get new SMS but as soon as I click on an old message, it disappears again). I was about to quit and called the O2 service center in my area, whose advice was for me to bring the unit to their shop so they can get a look at it. I tinkered some more with my phone (the idea of leaving my phone at the repair shop didn't exactly excite me)-- did another hard reset, re-installed the new ROM, restored my backup. Maybe I just got lucky, but I got my Atom Exec working again! Re: synchronization with Activesync, I think I made a new connection and overwrote the existing one.
well, i was able to get it in to the bootloader mode and reload the operating system from the SD.
To Alc,
Reload the operating system from the SD is not a good solution, I tried it several time but my Atom cannot write the OS corectly from the SD.
Try flash the OS through USB connection.
First, remove the SD and get into bootloader, then connect your PDA to PC with USB cable.
Second, go to your PC Hardware Devices and update driver for you O2 Atom as picture below.
Finaly you have your O2 connected to PC as "Microsoft USB sync" and it is ready to start The flash tool from your PC.
Good luck!
Here are the rest pictures.
Sorry Admin!
(have to post reply twice because attachment limit of 5)
Related
Hello everybody,
I have a problem with my Touch. A couple of days a go my phone was empty, when I tried to power it up again and start it, but then it hanged in the first screen (the T-mobile screen for my phone). I read a lot on this forum, but I'm a newbie so it's hard for me to find the good solution. I could get the phone in the bootloader ( triple color screen), but it doesn't give the RUU letters in the right corner. If I connect the phone threw usb to my computer, it doesn't give me anything. Active sync doesn't go green. I tried the following things,
1. Go in the bootloader (this works!)
2. Disable the USB connection in active sync
3. Start an USB-sniffer (didn't find my phone)
4. Tried to use MTTY (gives me the error, can't open USB connection, something like this)
5. Tried to flash a rom while in bootloader screen, but the flashing utility can't connect to my phone.
So the main problem is that the phone can't connect to the computer, what do I have to do, to put a new rom on my phone, so I can start the damn thing again??? Please help
Thanks
have you tried hard reset ?
still nothing
I also tried hard reset, still hangs in the first screen, there's also a new problem. I can't put it one, and when I put in the adapter (to charge) it give a red light (constant), what to do, what to do?
no tips?
nobody has any solutions?
I recently tried the radio update by Bajok (http://forum.xda-developers.com/showpost.php?p=5034135&postcount=644),but in the middle of step 4,I accidentally disconnect the usb from my phone.. Now,my O2 Atom Life stuck at DSUU Mode,"Please plugin the USB cable and re enter eboot".. What can I do now? I can go to OS,but every time I soft reset,the error shows up.. I also got stuck every time at stage 4 when I retry to upgrade the Radio.. Any suggestion? Please..
reinstall the rom in ur phone and then do the radio update
djteotancolis said:
reinstall the rom in ur phone and then do the radio update
Click to expand...
Click to collapse
I did reinstall with many Roms,but still,each time the error exists..
Finally,I've revived my O2 Atom Life.. Thanks everyone..
how ur problem was solved ... can u plz tell ..
ahmedd said:
how ur problem was solved ... can u plz tell ..
Click to expand...
Click to collapse
Try do a hard reset (Hold power button + reset button).. Then,the device will ask to press Call button & End button..
after update the radio, my battery indicator always shows 100. the bar indicator is ok, but not the percent amount, it always 100. anyone knows how to fix this? tq.
please help
I accidently disconnect usb from phone when updating rom via dsuu. And now I am having dis error roport “!!!please plug in the usb cable and re-enter the eboot!!!”. I tried reinstalling via desktop but it did not connect, tried using mini sd, it finished installing but when the screen pop up the error report pop up. And I tried to press power and reset and after that no instruction appear accept the error report pop up. What should I do
Hello I will try to follow what is being said just to activate the download files.I do trying downloading music by pluging in the usb to my phone but it seems that my download files doesnt appear to my phone.
tovan_akbar said:
I accidently disconnect usb from phone when updating rom via dsuu. And now I am having dis error roport “!!!please plug in the usb cable and re-enter the eboot!!!”. I tried reinstalling via desktop but it did not connect, tried using mini sd, it finished installing but when the screen pop up the error report pop up. And I tried to press power and reset and after that no instruction appear accept the error report pop up. What should I do
Click to expand...
Click to collapse
try hardreset maybe, as he does...
I tried to hard reset but my ATOM just stop at "!!!Please plug-in the USB cable and re-enter eboot!!!" and even can't bl Plz help me.
Ok, so i got fed up with my phone freezing so i thought i would get SEUS to
re install the rom, (mr1, mr2 is not available to me yet).
The indicator got to about an inch along when a message popped up saying
update failed.
Now i cannot enter bootloader to try again, the phone will not turn on, SE refuse
to help saying it is not released in the UK so i am not entitled to support.
I have not yet had a reply from where i got it from.
Is there any way to get this piece of junk going again?
Thanks.
Try to charge your battery on another phone / external charger.
I encountered a similar problem when trying to flash the X2. I received the UPDATED FAILED error, pulled out the battery, Volume Down + Power and gave it another try.
SEUS shouldn't brick your phone, maybe it's a problem with your battery.
The battery is at about 80%, i have tried it in my X1 as it is the same battery.
I tried the X1's battery in the X2 as well.
When i press the volume down and power buttons it vibrates for a fraction of a
second and then just stays on a black screen.
Let's try then a forced bootmode connection.
1. Insert the data cable into the phone without the battery plugged in.
2. Open SEUS and go to the connection screen.
3. While the software is searching for the phone, keep VOL DOWN + POWER and insert the battery.
After the phone vibrates, the software should recognize the X2.
This procedure generally applies to dead phones and sometimes works.
Post the result.
Still nothing, i kept the buttons pressed for about 30 seconds, then vista popped up a message 'usb device not recognised' the phone stayed as it did before and SEUS did nothing.
Sadly the support excuse they are using is what a lot of manufacturers do if you are in an area where they don't support it. This is the downside of buying a device on eBay etc. before it is "officially" released in your area. Contact the point of sale and hopefully they can send it in for you. You might have to pay shipping costs.
Leave your battery out and unplugged for an hour and then try again after that to revive it.
I did not even realise it had not been released in the UK, i got it from a UK website.
I am still waiting for them to get back to me, as it is Sunday they won't be getting back to me till Mon Tue i would think.
SE were fast though, less than an hour to reply, about the only credit they get though.
I have had the battery out for more than an hour a few times so that does not work.
Thanks for the suggestions though, keep em coming if there are any more.
WINE GLASS said:
Ok, so i got fed up with my phone freezing so i thought i would get SEUS to
re install the rom, (mr1, mr2 is not available to me yet).
The indicator got to about an inch along when a message popped up saying
update failed.
Now i cannot enter bootloader to try again, the phone will not turn on...
Click to expand...
Click to collapse
The exact same thing happened to me today, but I did not even get the update failed message (but I got the inch )
The phone is now bricked. No bootloader no nothing.
I guess you guys have the Singapore English versions? A lot of those retailers in the UK were getting them through Malaysia and so on. Then selling in the UK but not informing buyers that SE wont support it in the UK yet. It's really sad
It's a French X2, and I got it in France. I think I will have no issue with getting my X2 unbricked (or replaced), SE support is pretty good over here.
But if in the mean time someone has an idea or a trick on how to unbrick a X2 (other than the tips already listed in this thread), I would be happy to test it
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
-kOS- said:
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
Click to expand...
Click to collapse
Wrong phone, wrong forum, wrong idea.
-kOS- said:
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
Click to expand...
Click to collapse
Learn to "Read" and use the "Search" function newb.
Hi!
This has happened to me also. The solution was to connect the original charger (I usually charge from the USB port on my PC).
Try this:
1. Disconnect all cables from phone.
2. Remove battery.
3. Insert battery.
4. Connect original SE charger and charge for 5 minutes.
5. With the charger still connected, press volume down and then power on simultaneously - hold until SE logo appears.
If not working, repeat from step 1 several times (i tried 3 times before it finally worked).
6. Connect PC USB and run SEUS update.
Seems to me like the phone does not always charg from USB, and that when it enters the "black-screen-after-short-vibration-after-power-on"-mode it does not charge while in this mode.
Mod edit: not rom dev related, moved to general
well... when it say update fail but if save the new rom to ur phone then its fine, take the battery out and restart ur phone.. it should load the new OS.. my one says fail everytime.. so no problem for me
Hello,
I tried to update the radio and the SPL version on my Tattoo. Everything went fine until I had to reboot my phone. It shut down alright, but it never powered on again.
These are the following problems I am having with my Tattoo at the moment:
Cannot power on phone.
Cannot boot into recovery mode.
Cannot boot into FastBoot.
When I connect it to my computer via USB, nothing happens.
The only thing that it's responding to is when I connect my it to my charger.
Does anyone have a solution or is my phone dead forever?
Thanks ahead!
bump? anyone?
Send it back to HTC. If anyone can do anything about it they can. There's nothing else you can do. Sorry
boo.. that sucks..
Well, thanks anyway
Ehm, I don't want to post a New Thread so I'm gonna ask here:
Does anyone have the pinout for the Tattoo?
Take a look at this. I guess they fix such things (but you never know if they just are after your money. http://www.ort-jtag.com/index.php
Yeah I saw that already. Also, there is a file name Tattoo Jtag on their website in the Support section. However, to access that section you have to enter your products serial number (which is I'm guessing the phone's serial number). I have tried several serial numbers (including mine) and all of them were 'invalid' so I never checked the files out.
Also, they only have one thing in the shop which is a kit and it costs $330 so no thanks
I have a similar problem, I would like to share my knowledge although I must be completely out of way.
My experience is based on the BeagleBoard and Angstrom so I really don't know the HTC HW and Android at all...
- The device boots from an xloader that instructs the device how to proceed with the boot
- the bootloader takes place (great u-boot in the beagleboard ?? in the HTC phone) the bootloader allows for ROM or kernel+rootfs flashing and much more
- now the kernel is loaded.....
User mode applications do not allow to have access to the memory area where xloader and u-boot lie so they should be safe all the time to allow for device reflashing.
So we should have access to the device via bootloader anytime if we knew how... maybe somebody can help us further.
Fabio
Same here...Exact same issue...No Recovery mode...No USB Connectivity, Screen turns on but is blank, alhough I did see Tattoo popping up initially but not any more...All I can see is the LCD back light turns on...Battery does charge...Also when I try to enter Recovery mode screen keeps blinking as if it is trying to restart again and again...Someone help
similar problem here, but i get absolutely no response from the phone, it doesn't even recognize the charger. do i just throw it away and buy a decent one or is there a solution?
Sparky the only way for now to fix that click is to bring it to some service point that have that ort jtag, because only way to fix that is to writte new boot sector on phone . Im sure that i know at least 2 services that have ort jtag in Novi Sad . Look for marvel *Miroslav in Ns, or send me private message
same thing happened to me
just this morning, and in desperation I tried hard to remove the batt cover (prob pressed some of buttons, I felt a jerk and ho it was back in amon ra`s recovery, nect time I just removed the battery waited for 30 secs, then press off&home and hold it till recovery came back) but for good half hour NO REACTIONS , ABSOLUTE BRICK, nothing when I put the usb in PC or in socket, dead screen, no sounds and no reaction to ANY combination of keypress. I guess you could call me lucky (in last few days I flashed at least 3 versions of froyo roms, this afternoon I bought =8GB class4 Kingston, formated it in PC FAT32 default size, copied EVE. from my 2gig rom then just turned it down (yes I am brave) and put the 8gig in tattoo, it works like a charm (finger crossed it will continue)
So is there an available Jtag for the Tattoo yet?
I'm in the same situation. No recovery no fast boot, Damm!
I`ve update psfreedom with psgroove_hermes_v4 zip file then my tattoo reboot and now I only get the Tatto title screen but nothing happends.
Somebody have clue to give back life my phone.
Thanks!
if you can get to the title screen, that means you can connect it to your pc via USB and recover from a backup (I hope you made one)
Hello, I connect my tattoo to my pc, but usb connection is not available yet.
Is There is a way to activate usb when my phone blocks in tattoo logo??
Thanks for reply.
payasi35 said:
Hello, I connect my tattoo to my pc, but usb connection is not available yet.
Is There is a way to activate usb when my phone blocks in tattoo logo??
Thanks for reply.
Click to expand...
Click to collapse
You have to enter in fastboot.
Hold volume down and turn on phone.
Cheers
Sorry but as i said before, I can't access to recovery menu neither fast boot menu.
Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.
Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:
Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.