Related
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs! I'll soft-reset and sometimes it wont boot up, it just hangs at the windows logo screen. I upgraded the ROM to the newest from Cingular thinking it was some program that was doing it, but it comes back.
When it's in portrait mode, it's the upper right hand corner. When it's in landscape, it clicks the start button(upper left) so I dont think its a program thats making it click, but something physical touching that certain spot. Anyone have any idea?! I thought something was stuck in there but it's clean.. this is so annoying, I cant even make a call since it clicks exit when it comes up! It stops SOMETIMES for a few minutes but then it comes back after a while.. anyone else?
Give it a yung choo kung foo whack, take a run-up.
...
Sounds knackered, you could try the screen alignment fix, pressure from the gasket may be causing this:
http://wiki.xda-developers.com/index.php?pagename=How to fix the Screen Aligment issue
Your best bet is to send it back for repair though .
I bought it off ebay.. so no warranty
It's weird because I take a very slim credit card( 1/2 the thickness as regular cards) and slide it in and bring up the plastic around the screen and it STILL does it!! nothing is touching the screen at all. Also, my alignment is still spot on perfect.. what gives?
Oh yeah, I did smack it a few times and it works sometimes.. It's been okay right now for about an hour but I know it's going to be short lived..
Did you try loosening the screws?
MilanoRex said:
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs!
Click to expand...
Click to collapse
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
tadzio said:
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
Click to expand...
Click to collapse
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Your case is putting pressure on that part of your screen. It is not device specific. Slip a piece of paper under the case to check for clearance. I use under the case screen protectors and have seen this before. You may be able to simple pry the case and create some clearance.
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
MilanoRex said:
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Click to expand...
Click to collapse
The iPhone? You're going to actually exchange this beautiful piece of full-fledged mini-computer &phone in one goodness for an iPhone? Note: This was not meant to flame anything or anybody. If you feel that I have, I deeply apologise.
jotham said:
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
Click to expand...
Click to collapse
I've inserted a small piece of plastic between the frame and the screen (one month ago).
Here you will find a resume of proposed working solutions
http://forum.xda-developers.com/showpost.php?p=1056346&postcount=227
Can you tell us the serial of your Hermes? (HTC62xxxxx, 63, 64)
That is the same problem I had with my 8525. I tried ALL the solutions here in the forum but nothing solved it. I finally returned it to Cingular and they gave me a brand new one with zero hassle. Two weeks in on the new one, and it's working like a champ (knock on wood).
the S/N is HT657xxxx
Nothing is putting pressure on the screen, I've pried some clearence between that part of the screen and it still does it. I dont even have a Cingular account, so I doubt they'd help me
My only other option is to take it apart(following the japanese website instructions) and see what's going on.. Maybe something underneath the screen is doing it? I dont know..
Oh yeah, not only did i loosen the screws behind the screen but I completely removed them and it STILL does it. I found the registry setting for screen sensitivity and lowered it from 7,xxxx to 5,xxx and it did nothing..
Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!
SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?
Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.
I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.
Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.
Anybody any idea? advice?
I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Anyone anyone?
HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.
mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?
i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .
dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.
I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.
Hi,
just another question by a lam3 user
After some day using my tytn, i noticed that the keyboard is very loose, just after locking it under the lcd.
to explain better: video
http://www.youtube.com/watch?v=Pj56htWOHEk
as you see, the keyboard is very loose just after locking it.
My device id is 640, so it is affected by some keyboard sliding problems(is a v1605)...but my question is: There is something i can do to fix this?
i tried to tighten the screws i signed here
but without significative improvement.
this is a minor issue,i think, but if i can fix it my tytn will go better in my huge hands
however, no problem if the fixing procedure involves to remove the warranty sticker up the screw, the tytn is on italy and i do not think that vodafone uk will change it
many many thanks
gtazok
The screws you've tightened are just for the housing. To make the keyboard tighter, you need to take the device apart
These 2 links explain everything you need:
http://michael-channon.spaces.live....BlogPart&_c02_owner=1&partqs=cat=Hermes+Fixes
http://www.howardforums.com/showpost.php?p=9119842&postcount=1
Good luck!
underneath your main board is 4 screws tighten those and you should be set. If not you may need to by a new housing. I hope the tighten helps though.
omg, this will really need to open all the device!
damn, there is no other way?
I couldn't really tell from your video if it is the standard loose keyboard problem you've got, but my keyboard was loose in the way that when closed it could 'fall' open pretty easily.
I used the guides above, and while it does invalidate your warranty (unless you're able to remove the warranty sticker without breaking it), it is very easy to do and put back together.
my problem is, as shown on video:
when i try to press the power button, i apply some force to my forefinger to tighten the grabbing around the phone.
when i apply this force, the upper part of the phone(the part where is the buttons of mail and iexplore) slide off the housing, and go for about 2 mm (as shown in the video).
i will like to tightnen this, to do that the phone will never slide the keyb without apply *Decent* pressure.
the keyboard,however, stay solid when fully opened, and *decent* pressure is needed to restore it from the full opening to housing closed.
was i *almost* clear? i'm very sorry but i understand that my english is a mess and really confusing, but if someone could guide me, i can do photo, pictures and so on.
thanks
gtazok
Yep, that sounds exactly the same as my problem!
The 2 links above should help, as long as you're happy to take the phone apart. If you are willing, it is pretty easy to do, but will invalidate your warranty if you still have one.
A couple of taps on the indents on the sliders with a screwdriver will make the sliders much tighter, and you can test the tightness before putting it back together.
I went a bit overboard with mine and overtightened it, but now I prefer it that way -there's no way the keyboard will slide out without some effort
StarMonkee said:
Yep, that sounds exactly the same as my problem!
The 2 links above should help, as long as you're happy to take the phone apart. If you are willing, it is pretty easy to do, but will invalidate your warranty if you still have one.
A couple of taps on the indents on the sliders with a screwdriver will make the sliders much tighter, and you can test the tightness before putting it back together.
I went a bit overboard with mine and overtightened it, but now I prefer it that way -there's no way the keyboard will slide out without some effort
Click to expand...
Click to collapse
great, that was exactly was i searched so!
but..a couple of taps...i have noticed that the indents are "stamped", there is the possibility i will break it with too much force?
and, for opening the tytn, where i can find all the needed in one pack? i live in italy, but i have no idea of what screwdriver and things must(and where)buy.
maybe there is some omnicomprensive pack that could be shipped to italy without problem.
many thanks, i appreciate much
Gtazok
The metal is quite soft in the sliders so it is possible to hit it too hard, but I don't think you're likely to do that if you start softly and keep testing the slider tightness until it's right.
The only 'special' screws are the ones holding the case in, but they can be opened pretty easily with a small flat screwdriver. From what I can remember, the screws inside the phone are just small normal screws.
gtazok said:
omg, this will really need to open all the device!
damn, there is no other way?
Click to expand...
Click to collapse
Okay If you do tighten those screws it will help that. I've seen them to be soo bad that if you tilt the device it slides open. Soo basically if you still under warranty send it to your provider other wise follow this guide.
ftp://ftp.xda-developers.com/Uploads/Hermes/Hermes_Manual_Hyins/Hermes_Service_Manual.pdf
This will guide you through the entire process of taking apart your Hermes. Good luck if you have any questions.
[email protected]
HI!!
just managed to re-close my hermes (first time i closed it without inserting the last cable LOL...i forgot it, but before powering off he comed to my mind..omg what i have risked not plugging last cable before closing??)
however, i did manage do disassembly only with a standard little screwdriver, not without problems
i just arrived to disassemble the keyb, and get rid on the rails.
I must admit that i NEVER have seen so much dust in a phone(i think mine was re-assembled from another).
i have extracted the rails, the 2, and tried to gentle tapping the indents.No way to go, i tapped *gently*(sometimes a little hard) but i really noticed no improvement
so,i thinked:
"if i change the rails, i will have a perfectly mirrored situation, with the keyboard closed it will be ok, with keyb opened it will be a little loose"
(remember, the keyb was loose when try to open it, not when to close)
So i changed the rails, switching them...
and now it's really better, the phone rarely go off his housing, closed, and go down a little more easily(but is acceptable, because i never do any "forcing" when it's open..)
maybe, with time, the opening will become a problem, with the keyb sliding to close when it's open.
However, maybe this not occour.So for now i'm happy
last thing. I noticed that on the page where the man tried to adjust the rails, he suggested
1)to tap the indents( tried, work very very little)
2)to insert pieces of ribbon
i not tried the second suggestion, because i have not understand WHERE to insert those pieces.Maybe he was suggesting to insert them at the end of the rails? where the carts block? if it is, why? i tried to pull up the small piece of "sheet"(i don't know if it's the correct term, sorry for my bad english ) on the border of the cart where it don't block, but whitout results..so inserting ribbon what improvement would have done?
thanks for the patience to read all my messed up english and many thanks
gtaz
the sliders are becoming loose as the beginning.
someone knows where to buy the sliders as a spare parts?
anyone know?
ok no way?
gtazok said:
anyone know?
Click to expand...
Click to collapse
Take a look in this thread & mikechannon's link; if not there, then just pm / ask mikechannon...
http://forum.xda-developers.com/showthread.php?t=298784
galaxys said:
Take a look in this thread & mikechannon's link; if not there, then just pm / ask mikechannon...
http://forum.xda-developers.com/showthread.php?t=298784
Click to expand...
Click to collapse
thanks
gtazok said:
the sliders are becoming loose as the beginning.
someone knows where to buy the sliders as a spare parts?
Click to expand...
Click to collapse
I think you just need to increase those indents a bit more than you did. It is more successful to tap the indents using a small flat blade screwdriver and a small hammer. (Go easy of course and keep testing as you tap. You want a very firm click into place. You should hear the click and it should be really quite hard to move the slider over the indents using your finger tips)
The tapping technique is probably better than just pressing a screwdriver blade onto the indent. Pressing rather than tapping is likely to simply bend the entire metal strip and curve it slightly. This might improve the grip for a while but as the curve gradually straightens out again the slider will just become loose again. Using the tapping method I did mine well over a year ago and I have never had to redo it and it takes a very firm push an audibl clicks to open the device.
(Buying new sliders will not solve your problem. The vast majority, it seems to me were made withy too shallow indents. It may be worth buying new ones if the micro welds have sprung apart however)
Mike
hi
i dismantled my hermes one more time. This time i put out an hammer(a big hammer,indeed)so i "gently" hammered with a flat screwdriver the indents.
result? the keyb is now "really locked" when i open it..but the opening problem remain.
when i try to open it when it is closed, with my finger, i notice that the slipping of the upper left part(seeing the phone from the front) is EVER too loose, i reopened 2 times and tapped "not so gently" the incriminated indent, but i noticed no result. i also tried to exchange the sliders (the lower with the higher) but no improvement was done.
i think that is a defective implementation, because the "centre of pressure" is located in the upper part of the phone, so the phone is like to open more easily when it is closed. Did anyone noticed that?
however, the overall is increased, i think, about 30-40% more tighten as before, and that is no bad.
shame it has no solved my problem, but life it so bad that i can will be live happy with a little loose tytn
thanks
Gtazok
I agree that my the upper left keyboard slider has always been looser than the bottom...
good, that confirm my idea.
let us know if any other noticed the same thing.
thanks
gtazok
Hi guys!
Long time no post!
I hope you can help point me in the right direction.
Two things started happening with my 8525 TyTN, rendering it unusable. I do have a backup one, so it's no panic. But I would LOVE to try to repair this.
Here's what happens!
1 - The two LEDs in front don't work! No green; no blue; no amber. (HOWEVER, When I first replaced the battery after a hard reset, I did see is glow red for a second!)
2 - None of the buttons on the front work! None. Start/End, the D-pad, mail, internet explorer. All dead!
Interestingly enough... the LCD screen is perfect, as is the touch screen.
The unit also works perfectly fine.
I did a Hard Reset.
I am using WM6.0.
I am wondering... PERHAPS there is some kind of ZIF cable that goes from the body to the top panel? MAYBE that came loose?
If you have seen inside your TyTN, is there one cable/ribbon for lights/buttons?
If so, that would explain it!
If there are two cables/ribbons.... one for lights, one for buttons, then the odds of them BOTH falling out are near impossible!
I would LOVE to hear any ideas or thoughts!!!
Thanks as always!!!!!
Mike
Hello and welcome to a new phone!
I have a similar problem, mine sometimes gets a white screen and the D-pad buttons rarely work for long.
It is quite possibly a loose ribbon cable.
There is actually a thread here about this issue - just do a search for 'white screen' or similar and you'll find it. It was posted to within the week so shouldn't be far from the top if you browse for it, but I can't remember which Herme's category it was in.
There's even a full guide with pics to pulling your 8525 apart!
Cheers! Oggy. ó¿ó
try a new rom,.
I have the same problem. I thought it was bcs my TyTN fell down once. It started with Iexplorer always popping up when I wanted to do something. I thought the IE button at the top was stuck or something and when I pressed hard on the message button everything was okay. All buttons worked. But after a few days they stopped working and pushing the message button wont work also. And both the red and green call button leds are always shining. It sometimes happens that the dpad works for a second and than nothing.
I used the original wm5 and flashed to 6.1 now, no change tho.
it's not the rom, tried several roms now
for me it's just the call answer button, but this is annoying enough
there are some topics in the hermes section which describe the problems you encounter or even worse problems (the lcd flickering or just giving you a bright shining white) and they all say it is a loose cable connector right under your dpad
some of them opened their tytn (guarante already gone) and put some sort of paper or rubber or sth else on the connector.
other say tighten or loosen the screews worked for them, but none of the solutions seem to be final, it always works for some time.
if you have still guarantee i would try sending back or try somewhere else a repair, that is what i will do with tytn
i hope i do not have to pay for the repair
good luck
Loose screw
I was able to fix this problem after ATT told me that I was out of warrenty and it was going to cost 499.00 for a new phone.
I it turn out it is a loose screw on the inside and to get to it you have to undue 11 screw to get to it. I might be able to fix it for you. I dought you would be able to get into this phone and not hurt any of the other functions.
Rick
Hi,
could you advise how you managed to fix it?
Thanks.
button failure and white screen
I have the same problems, if I turn off and on for 3/4 times everything back to normal. But is really annoying because I miss calls.
To me seems a software issue.... I can solve it by turning off the screen does not make sense hardware problems
have a look to this post:
http://forum.xda-developers.com/showthread.php?t=435281
I have still to test the suggestion of schaps advance config version 2.02.1.0.0
Sorry it not a software issue and you can flash a 100 roms and it still won't work. You simply have a bad flex cable and possibly a defective dpad circuit board. You have to crack open the phone to replace it and it has to be carefully done. There are tons of DIY's about opening the phone and replacing the cable. There are even YouTube Videos about it.
I've had the G1 for about an year and the MENU button began to act strangely.
I have to press it several times or press it around the edges to get it to respond. Does anyone else have the same problem and do you think it can be fixed without changing parts (e.g. cleaning or something else)
Yea mine is like that too. Initially I thought it was SetCPU making response/wake up time slower but all my other buttons wake the phone up quick. I have to press mine on the right side for it to register.
I'll be watching this thread for solutions, if any.
Ohh so its not only me who is having this problem, on my black g1 i have to press 2 times menu to activate it. But sometimes in one press its ok, weird... I guess it started to happen after i root and install CM .... i hope i am wrong for my lovely CM rom....
I'm afraid it could be a hardware issue, at least that's what I'm going for at the moment. It's probably the most frequently pressed button so It's probably going to die first. Anyone who has more experience with phone hardware can tell us why buttons fail over time and how they can be foxed. I'm guessing I'll have to buy some spare parts and fix it myself...
I uninstalled cyanogen 5.0.8 and ran an 1.6 rom (non cyanogen) - at first thougt the menu button worked fine, but it get's unresponsive again. So it's a hardware issue.
I wanna tell you a little story:
Once upon a time, in my years before my Android mobile, i used a HTC Tornado (WinMo), where a joystick was used for navigation. When time passed by, it began to react strange: i had to wiggle the joystick a little to navigate in some directions or sometimes it was impossible to do it at all without a bit force on it. Many others had the same Problem an the drivers of new versions of WinMo where blamed for it. So all devs made their work on it and tried every setting they could find to get this thing working... but nothing helped...
One day, a guy came and disassembled his Tornado to look at the joystick in hardware. He took a magic spray and sprayed it onto the electronics of the joystick, wiggled it a bit and reassembled his device. After turning on his phone, he found WinMo working like charm again and the joystick reacting like in childhood!!!
Well, why i tell you this story:
I didn't believe it or wasn't willing to take my device apart (like many others) and tried all software drivers the devs built instead. But as nothing helped, in the end i bought this magic spray, disassembled my device, sprayed on the joystick, wiggled it and put all together. And - YES! It was like having a new phone!!
From this moment on, i use this spray for everything: my camera's dpad wasn't working too - i sprayed on it, wiggled it a litte bit - and it was working again! My doors everywhere in the house were squeaking - i sprayed on them all, and - guess! they were silent again and opend nearly by themselves!
So -what's this magic spray? It's WD-40 (http://en.wikipedia.org/wiki/WD-40)!
I would say, try it! You can't destroy anything (although i am not liable for any damages caused by it's use... ) I think, you don't need to disassemble your phone, just spray a little bit on the corners of the home button, wiggle it a bit, clean it and you're gone (...or disassemble your phone... ).
Hope my experience helps someone!
Thank you. That's what I need - a good practical advice. I will definitely try that.