Hello 2 u all,
I have just replace the housing of my QTEK S110 with a black JAM imate but I have broken the sound switch on the side. Anybody knows any site where I can buy spare parts for the phone.
Thank you all in advance
Have a look on ebay
Related
Hi,
Where can i buy Qtek S100 housing, front cover and back ??
Best regards,
Alex
Hi All,
I need to change the lcd and the housing on my wizard I have an lcd from a magician (imate jam) would that work with the Wizard (imate K-jam).
Also I can't find the service manual for the wizard in the ftp server can somebody help me find it.
Thanks
Serkan
well I ended up opening it up by myself it was straight forward but now I need to know if the LCD's are the same between Wizard and magician.
The magician is a end edition one...
I think they are diferent. But not sure.
Anyway. I need a wizard keyborad ribon for my faulty one. Have you this part?
Thank you
it turned out both LCD's are the same. But there are 2 kinds of LCD's for both the magician and the wizard (gen1 and gen2) in my case I was lucky that they were both the same gen.
And for your question, I am sorry but I don't have any spare parts.
Hi,
Yesterday my Qtek 2020i's display broke.
Repairing will cost 200 EUR, this is too much if you can get one new for 350 EUR.
However, I found this display:
http://cgi.ebay.at/orginal-Display-...QQihZ012QQcategoryZ123195QQrdZ1QQcmdZViewItem
It says, that it's also compatible with XDA 2i and MDA 2i but Qtek 2020i is not listed (only 2020).
Can I make sure that Qtek 2020i is the same as XDA 2i?
And, more important, the model number for the selled display is: 60H00022-00
I opened my Qtek but my model number is 60H00022-03 :-(
Does anybody know if that display will also work?
If not, I've a big problem!
Are there other solutions then?
Thank you very much in advance!
Niki
Qtek 2020i is the XDAIIi, yes.
If you are competent in DIY repair, try E-Bay for parts.
Keywords: Dopod 696 screen
The screen component is made up of 2 essential parts, the touch screen digitizer and the LCD screen.
Let hope not all of your two components are broken.
If the digitizer is cracked, the cost is rather low.
hi my imate qtek 2020 xdaii is dead i found online Mainboard for Imate-PDA2- SPV- M1500- M2500
can i use it instaed or will not it fit into the old mainboard place ?
Hi,
Firstly, I'm new to this forum, so hello to everyone! It looks like a place I'll visit often
I recently bought a 2nd hand i-mate JAMin. I'd never used a PDA/mobile combo before and now I have one I love it! But I've only had it a week and yesterday the screen broke!
I was looking for replacement screens on ebay - I found a company that sold many types of replacement lcd but I couldn't see i-mate JAMin in their list - I emailed them to ask if they stock any and they simply replied "no, we don't". Then I learned that the JAMin is an HTC Prophet and that this is also sold as the "Orange SVP M600" and the "Qtek S200". This very same ebay seller *does* sell replacement screens for the Orange SVP M600!!! - they currently have 10 in stock!
If I buy an Orange SVP M600 screen will it fit my i-mate JAMin, or not?
Same goes for the Qtek S200 ... can I use the screen (or case / battery etc.) from a Qtek S200 in my i-mate?
Finally - yesterday I saw some step-by-step photo instructions on how to disassemble the JAMin and replace the screen. It looks a bit tricky but I reckon I can manage it. However, the written instructions were in a foreign language... does anyone have a link to a good quality disassembly guide? (and can anyone let me know what type of screwdriver I need to undo those little hexagonal screws?)
EDIT: I found this link elsewhere on this site http://www.modaco.com/content/prophet-prophet-modaco-com/240109/changing-you-prophet-case/
Thanks in advance for any help or advice!
I emailed that ebay shop again asking if they are sure that their Orange SVP M600 replacement LCDs would not be compatible with my i-mate JAMin since both PDAs are an HTC Prophet inside. This is the reply I got ...
The ribbon colours can be different, so these LCD are not the same.
But we just got in stock lcd for Jamin, so you can order this Orange SPV M600 replacement LCD display screen and make note that this should be for JAMIN and we will pick correct ribbon colour
Click to expand...
Click to collapse
Does this "ribbon colour" thing fit with anyone else's experiences?
It seems a bit odd that the day I ask if JAMin and SVP M600 screens are the same they suddenly get stock of JAMin screens and they want me to order a JAMin screen by buying a SVP M600 screen and telling them it's for JAMin!
Either way, I'm currently bidding on a different 'spare-screen' auction... if I don't win that I guess I'll order from these guys in the way they've described.