HI,
I have been using a jam for about 1 1/2 years. I got my K-JAM today. It seems when I plug my K-JAM into to usb, my wireless internet connectivity hangs on my computer and I need to unplug the K-JAM and reboot my machine to get it back online. When it hangs the IP of the wireless card also changes but the connectivity is not there. Sometimes I have to reboot the Belkin Router to which the notebook is connecting. When I plug the Jam in, I dont have this problem. When I plug the K-JAM in I am able to sync with the computer however. It seems that there is perhaps a clash between My wireless network card and a componet in the K-Jam. Any ideas ??
Lots of USB problems with Activesync . It seems the new drivers strip memory allocations for other devices , my work laptop blue screens costantly asking me to remove the drivers. You could try activesync 4.1 available at buzzdev.net this may help with your problem.
Thanks for the suggestion wardy. I tried it and still no work. I wonder if it has something to do with the J-JAM DHCP server ( does it even have one ) if so why would it try assign an ip to my notebooks wifi card ?
I really doubt the K-JAM has a DHCP server... why would it? Its not switch or a gateway.
Thats what I would think. But as soon as I plug the KJAM in my wireless card hangs and when I look at its ip it is completey differnt range.... I am really confused. Also I have tried this several times, but when I plug the Kjam into my notebook, the whole network goes offline (internet) test from another computer on the network) and I have to reboot the reuter. Very strange ( am am not a noob with computers etc so it is really iritating me )
Hi,
I have been using the latest agile beta and all was good.
I didn't have activesync installed on my work laptop, and so the USB cable simply acted as a power supply (with XP grumbling about not being able to install drivers cos I am not an admin on the laptop)
I got the tech boys to put AS 4.0 on, but I found it meant that when I attached the USB cable for charging it now drops the GPRS connection.
The MDA Pro tries to connect through the USB cable which is not what I wanted to happen, as the firewall on the LAN blocks the ports for it.
Is there a tweak to make agile messenger always use GPRS/3G and to essentially ignore the USB network connection?
As an FYI, the AS has been removed now from the laptop, but AS on the MDA still thinks it is connected and drops the GPRS (a remnant from the AS installation I guess).
I was hoping for a reg tweak or something to fix it...
Hi,
i have the same Problem. I think this is not a Agile Messenger Problem. This is WM5.0 related. But I don't know how to solve that.
At home i have a WLAN and after some minutes WM5.0 will go in standby mode. So the WLAN Interface will go down. Agile Messenger loses connection. Why cann't it just dial up the gprs or umts connection? This connections will keep alive in standby mode.
I think I have resolved this issue:
I removed the AS pertnership/settings for the laptop which were in the AS options/settings.
With this removed, the MDA doesn't now try to sync and doesn't use the USB for network access, and my GPRS stays connected and the MDA charges through the USB.
I will do some resets, connects and disconnects to test further and report with a final conclusion.
Not sure how to solve eyeofthestorm's issue and I will post if I think of something.
Thanks :`)
Just got an XDA Exec, first time PPC user, moving from Palm.
Installed AS 4.0 - no problem
Synced - no problem
Wifi connection to my router - disconnected when Exec plugged in
When I plug in the Exec, a new ip address is created for my laptop in the
169.xx... range. (Local Area Connection , Device: Windows Mobile Device shows up in Network Connections)
Then when the sync starts, the firewall asks if activesync can communicate with another IP address in the 169.xxx.... range (I assume this is the Exec's address)
Sometime during this process, the wireless connection drops. When I unplug the exec, the wireless connection starts working, but drops out every few seconds, and then connects again.
I have to reboot to get a stable wifi connection.
Using Windows XP Pro, 802.11g, Kerio Firewall
Anyone with any ideas ?
Thanks
I have a simular problem, i have a toshiba Portege with built in WiFi, it also has toshiba software than when you "dock it" or plus in a RJ45 network cable, it will disconect the wireless, and vise versa, if you "un dock it" or unplug the RJ45 it will enable the wireless connection.
the has worked for years using activesync 3.8, 4.0 and 4.1 with my XDA2i and XDA2s.
I just got my XDA Exec and just pluged in the usb cable to sync, (activesync works fine) but my laptop then thinks i have a new 10mbs wired connection, so it disables my wireless lan, if i then disable the new conection made, the laptop reverts back to wireless but then it kills the activesync.
so agin Activesysc 4.1 did NOT do this the 2i and 2s but DOSE with the Exec
John
I would not care if it did not work only while the exec was plugged in as it is usually only for a short time while syncing. The big problem is that the wireless connection does not work properly after I unplug the exec. I need to reboot to get it to work again in a stable manner.
Have searched all over the place, have found no info, but did run into a post by a chap in Japan that seems to have a similar problem:
http://www.pocketpcjunkies.com/Uwe/...veSync-4-0-disables-wireless-networking-on-PC
I agree its not a bad problem of it disconecting whilst AS is syncing, but i leave mine in to charge.
at least my WiFi works fine as soon as i remove the USB cable. So i just plug the jasjar into a mains charger and activesync over bluetooth. Could you not do this as well as a tempory solution
John
I charge my Exec on mains so that's not a problem. I'm going to try solving this for a little while longer and then will have to try using bluetooth. Don't have a BT dongle for the laptop so I thought I would try to solve this first before going out to get one.
Lucky for me my laptop also has Bluetooth built in. I did on the XDA2i once manage to do activesync over wireless lan (the xda and laptop both connected to the same router/access point, even after doing some port forwarding i never got to work from other locations back to my laptop at home
cant remember how to set it up, but maybe this is a tempery fix for you rather than getting a BT dongle
Here's a followup
Tried the following things:
1) Disabled the wireless connection, and connected using an ethernet
cable.
Then plugged in Exec and synced. Wired connection held up fine throught
the sync. (When I plugged in the Exec, AS said that the exec was
already being synced to another pc called "Windows PC" so I should give
this pc a new name "Windows PC 2", to separate it out. However, it's
the same laptop! I guess this is because the wired connection gave my
laptop a different ip than the
wireless? - not sure about this). ANyway, no problem witht he
connectiong, before, during or after syncing/connecting the Exec.
2) With a freshly booted laptop and a working wi-fi connection Killed
the wcescomm and wcesmgr processes after syncing. Made no difference.
Wireless connection stil out. Had to reboot.
3) Finally, with a freshly rebooted laptop with a stable wireless
connection, I
- diabled the wireless adapter in Network Connections
- plugged in an ethernet cable, got a good connection
- plugged in the exec
- synced with the wired connection on
- checked that the wired connection was okay
- unplugged the ethernet cable
- enabled the wireless adapter
And no go, no stable connection to the router - until a reboot.
Then finally narrowed it down:
This may seem strange, but the problem with the wireless connection
only occurs if I am using WPA-PSK encryption (which I was using when I
started) on the wireless net. It does not happen if I use WEP or no
encryption. I have changed the security settings (and nothing else)
repeatedly and can recreate this at will.
Also, it has to be the AS 4.0 /Exec causing the problem as I have no
issues with connectivity until I connect the Exec. This too I have
repeatedly checked to ensure that I rule everything else out.
This issue is less to do with ActiveSync 4.X than the version of your Win Mobile OS. Are you running WM5 in your device because if so, it will do exactly that as you described.
For WM3 devices, you can have both AS (both V3.X and V4.X) and WiFI active concurrently. My guess on this is that the MSFT designers are trying to simplify the network side for multi-home devices (to borrow an old IP term here). If both network adaptors were allowed to be up as in the case of WM3, how does the device decide which is the preferred route when you can active sync to your PC via WiFI also ?
What happens to existing sessions when network routes are dynamically altered within the device, etc and so on?
This raises a whole host of issues which need to be thought through.
For that matter have you tried to configure your XP PC with a fixed LAN and WiFi connection and just try telling it to route intelligently by your LAN card instead of WiFi ? :roll:
I can confirm mrandery's findings. I had the same problem. Setting the wireless encryption to Web instead of WPA solved the problem for me as well.
This is bad. I can set my router to use WEP, but can not set my office's one, I'm not authorised to do so. It's default is WPA-TKIP.
as4 conflicts with Intel(R) PRO/Wireless 2200BG
I don't know if any of you realize this, plug in Exec to your note book does not kill your wireless connection, but it affect the whole network, everyone connect to the same router as you will also have connectivity issue, not just you alone.
Don't Microsoft have any solution for this?
postef said:
I don't know if any of you realize this, plug in Exec to your note book does not kill your wireless connection, but it affect the whole network, everyone connect to the same router as you will also have connectivity issue, not just you alone.
Don't Microsoft have any solution for this?
Click to expand...
Click to collapse
I know this now.
Plugged my exec into my laptop when at my brothers and it threw his PC off the network too. If anyone does find a solution to this it would be great.
No body can fix this??
My frind using Wizard and have the same issue.
See http://www.airscanner.com/blog/blog.php?blogid=0601040857
I tried this airfix, but it could not solve the issue.
Ditto same problem.
Hi guys ..
have just read through this post and it is exactly the same issue as a friend of mine.. i thought it was an isolated case however it would appear not .
If possible could all of you that have this issue please reply with the make / model of your WiFi Router and the Wifi card in your laptop .
other info like Router firmware may be good also if you know it ?!
maybe we will see a pattern ?
thanx all
There is a pattern -
- Intel wireless cards (2200 & 2915) & drivers
- Using WPA encryption (WEP and unencrypted not affected)
- it knocks off all wireless computers on the same network (not just the one with AS installed)
Router / PPC / laptop models seem to be unimportant.
Search google groups for a thread entitled " ActiveSync 4.1 kills wireless"
Wonder if this is ROM issue?
I have new (two weeks old) M5000 and only ever charge with usb.
I have d-link wireless router at home, and connected to it are two laptops and a desk top.
I can surf all night without have connection issues from all three PC devices, and from the M5000
All this with AS4 running to keep my sms messages synced up with Outlook (using Jeyo)
Hi Guys
Having trouble with a small program which switches between gprs connections when one network is down. The switching works fine but if a connection is already established i cant get it to disconnect. The call to conmgrreleaseconnection does not work so i have tried a differnt approach which was to use RAS. Unfortuantly Ras returns a constant error 632 which is structure size invalid.
Has anyone used ras on a mobile for connecting disconnecting and got it to work.
any help would be greatly appreciated
thanks in advance
jack
Apologies if this is in the wrong area. I have spent alot of time researching this issue and im yet to find a resolution. I am working in area with a strict SOE on the dekstop PC. I have an O2 XDA Atom. with activesync 4.5 I am using GPRS to connect to the internet on my o2 this is working fine. however the problem occurs when i dock the O2 into its cradle. the GPRS connection will cut and i wont be able to reconnect it. I have changed the properties of activesync and my O2 between 'my work' and 'the internet' to no joy. I realise i can do this by turning off accept usb connections in activesync but then i cannot control my O2 with the software installed on my machine..
what i want to be able to do is run MSN on my O2 continually all day and be able to view the screen from my desktop along with it syncing my calendar etc. if there is any articles which can help me that would be good ive been trying to resolve this for some time now to no avail.
Thankyou in advance
Same problem here..As I am using the my mobiler apps to control the phone via computer..The gprs is disconnected if i plug the cable data...help pls