how to get the Tomtom 6 works on HTC P3600?
I have set the GPS receiver to Other NMEA Receiver
and tried all the baud rate from 4800, 9600, 57600 and 115200
And set the GPS to com9
And waited each time up to 30 mins but still it shows the No valid GPS valid signal
Can anyone help me?
Thanks
do you have a gps enabled rom installed?
did you try outside with a clear view to the sky (or inside)?
Dans le cas de freeze de Tomtom avec certaines roms: Truc de Pierre Gre:
Certaines roms provoquent des freezes de Tomtom, comme les roms HTC ou Dopod.
Il faut alors installer ce petit .cab
Atifix.cab
cs_e2 said:
do you have a gps enabled rom installed?
did you try outside with a clear view to the sky (or inside)?
Click to expand...
Click to collapse
Sure the GPS ROM is installed
When I use it I was standing in the balcony maybe I need to try it again in an open space 2moro
ramboia said:
Dans le cas de freeze de Tomtom avec certaines roms: Truc de Pierre Gre:
Certaines roms provoquent des freezes de Tomtom, comme les roms HTC ou Dopod.
Il faut alors installer ce petit .cab
Atifix.cab
Click to expand...
Click to collapse
Sorry man I only can read english or chinese only
Roughly it's saying, there is an issue with Tom Tom and WM6, and find the file ATIFIX.cab, in fact click on the blue linky he's put there and you'll get to it, grab, install and see if that helps.
Seemingly TT freezes for some reason and this fix... erm fixes it :0
deech said:
Roughly it's saying, there is an issue with Tom Tom and WM6, and find the file ATIFIX.cab, in fact click on the blue linky he's put there and you'll get to it, grab, install and see if that helps.
Seemingly TT freezes for some reason and this fix... erm fixes it :0
Click to expand...
Click to collapse
But I am still using WM5 do I need this fix also?
Ermmmmmm dunno, but it's got to be worth a try
my00rs said:
how to get the Tomtom 6 works on HTC P3600?
I have set the GPS receiver to Other NMEA Receiver
and tried all the baud rate from 4800, 9600, 57600 and 115200
And set the GPS to com9
And waited each time up to 30 mins but still it shows the No valid GPS valid signal
Can anyone help me?
Thanks
Click to expand...
Click to collapse
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
and make sure you are not sitting inside the house/car with tinted classes.
cheers,
my00rs said:
how to get the Tomtom 6 works on HTC P3600?
I have set the GPS receiver to Other NMEA Receiver
and tried all the baud rate from 4800, 9600, 57600 and 115200
And set the GPS to com9
And waited each time up to 30 mins but still it shows the No valid GPS valid signal
Can anyone help me?
Thanks
Click to expand...
Click to collapse
You've got to use the TomTom 6.03, it's the version which can connect to an internal GPS receiver.
This with the GPS enabled ROM, like the mUn 2.0 TE (WM6).
The first time ... go outside your house / in the open air and wait like 3 min.
no word of a lie - it took me 8 minuites to get the very first fix. This was standing in my decent sized garden getting bored for a long time.
Fixes are under 2 minuites now tho
get TomTom 6.03 (the update), it allows you to select the internal GPS antenae and you should get faster fixes on satellites...
Just got a new Trinity. It came with a TomTom CD and instructions that said make sure you set it to Com 9 and 115200 baud FYI.
I've had crazy results. I've waited minutes for it to fix outdoors and I've also been able to connect within 10 seconds while inside my house. Results seem completely random.
When it is waiting for a valid signal, it shows that it is tracking 10 or more satelites. I don't understand it.
cortezzi said:
get TomTom 6.03 (the update), it allows you to select the internal GPS antenae and you should get faster fixes on satellites...
Click to expand...
Click to collapse
Where can I get the 6.03 update?
Look in this thread...
http://forum.xda-developers.com/showthread.php?t=305068
and read srsjason2040's post on 02-05-2007
IMPORTANT NOTE: When you upgrade to TomTom 6.03 you will need to reactivate your maps!!!
VITO Techs Navigator 2
Here's a trick that worked. After performing the ROM update, I installed VITO Navigator 2. It will search for a GPS reciever and has a test mode to change modem speeds. I have never used this product other than searching for GPS ports and testing operation. But it brings up Trinity GPS function quick and shows all possable SATs in seconds. Just why and how is beyond me. But a great testing application.
Hi had installed the fix but TomTom still freeze.
I´ve Trinity WM5 Portuguese.
Could someone help me?
Tomtom has a problem with the POI's. Try going to "manage POI" and de-select those that aren't essential (leave the speed cams if you use those). There is lots of info and problems/cures on http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewforum&f=6
Let me know how you get on.
TomTom Problems solved!
I installed ATIFix on Trinity but i had to install Update for HTC P3600 Update from TomTom before:
http://www.tomtom.com/support/index.php?FID=6736&Lid=1
Now, it works great!
Best Regards
goldc0der said:
I installed ATIFix on Trinity but i had to install Update for HTC P3600 Update from TomTom before:
http://www.tomtom.com/support/index.php?FID=6736&Lid=1
Now, it works great!
Best Regards
Click to expand...
Click to collapse
That is the V6.03 update that adds 'Built-In GPS' to the GPS selection menu. Previous versions do work, but must have 'Other NMEA Receiver' selected, at COM9 and 56700 Baud (Baud isn't sensitive, but 56700 is the device default)
A lot of users problems have been because they are trying to select 'Other Bluetooth NMEA Receiver' which won't work as the COM ports aren't configured.
Related
considering getting tomtom5 for my mda compact.
anyone know whether its compatible, has anyone got it?
Should be. TomTom 3 and 4 worked fine.
By the way, Bakonl's release of TomTom 5 was just posted on alt.binaries.warez.pocketpc.gps, along with a few maps.
Benelux map only.. :x
TT5 does work
and not only benlux maps are posted. italy, france, germany, spain, uk are posted as well. rest will be posted as well i guess.
anyway, waiting for my legal TT5 to arrive (with the bt gps), woei =)
I can't get it working... I tried installing in the program files and in the storage card directories but it crashes at the end of the tutorial, just after that the "Welcome to TomTom Navigator" message appears in the map screen.
I can't see the map nor the GPS is able to connect (TomTom "3" Navigator Wireless).
I can't find any registry entry, I modified the currentmap.dat in order to point to /storage card/italia-map.
Anyone was able to reproduce my problem and to solve it?
Yeah, I noticed there are a few maps out. I'd like Scandinavia tho Seems like a buggy version too.. Crashes often.
Yeah... reeeeally buggy, I tried to check the post in the alt.warez.pocketpc.gps newsgroup for infos about bugs/problems etc. but I can't find it in my nssp server and using the web I'm not able to see the post (I can just see the header) so... I still can't use it :lol: ; maybe it could be a bad installer, I noticed that sometimes it won't install some cabs from the cd, or maybe it's just the italian map which is corrupt... who knows? 8)
I guess the release on alt.binaries is a preview or beta version.
The official release of Tomtom 5 will be end of June.
Im still waiting for Destinator PN on emule...
Where can i find the TomTom 5?
I have installed TomTom 5 to see if it works, I'm unable to connect my BlueTooth GPS (Holux GPSlim 236). The port does not show up on the device list under Buzz WM2005.
Does anybody know how to change this?
Ikkuh
I have installed TomTom 5 , I'm able to connect my BlueTooth GPS (Holux GPSlim 236) on port 4
work OK for me !!!
JesperR said:
Where can i find the TomTom 5?
Click to expand...
Click to collapse
www.tomtom.com
Stefan
bruxelles5 said:
I have installed TomTom 5 , I'm able to connect my BlueTooth GPS (Holux GPSlim 236) on port 4
work OK for me !!!
Click to expand...
Click to collapse
I had the same problem.... go to the bluetooth com ports, change the GSM to use COM8.
Then start -> settings -> gps, on the first tab set com4 and on the second tab tom com8. The thrid tab should have the checkbox set.
Now reset your device.
Start tomtom, goto your GSM setup, choose Other bluetooth, select COM4.
Now exit tomtom and reset your device.
Start tomtom and wait a while (can take a few minutes for it to find the GPS).
This worked for me (you need the resets in order to detect the com ports!!)
Ikkuh
@Ikkuh,
How can I change the Com port settings on my MDA Compact? I can't seem to understand you're solution. I need Com 8 and TT5 only has 2,4,5 and 9.
Thanks in advance!
dickr43 said:
@Ikkuh,
How can I change the Com port settings on my MDA Compact? I can't seem to understand you're solution. I need Com 8 and TT5 only has 2,4,5 and 9.
Thanks in advance!
Click to expand...
Click to collapse
There is a serial port multiplexer build in just for the GPS. It is under settings -> GPS, if you use this, you can create a virtual serial port, and attach it to the hardware GPS. If you do this and reset the device, the virtual GPS will show up in TomTom (in my case it did ;-) )
Ikkuh
I must admit dickr43 has got a point. Even though you are trying to be helpful, Ikkuh, it's a bit hard to understand.
Start tomtom, goto your GSM setup, choose Other bluetooth, select COM4.
Click to expand...
Click to collapse
There IS no GSM setup in TT. Most likely you mean GPS?
There is a serial port multiplexer build in just for the GPS. It is under settings -> GPS, if you use this, you can create a virtual serial port
Click to expand...
Click to collapse
Doesn't exist either. Must be some third party app you have installed...
dickr43,
Try removing your GPS pairing from the Magician. Go select the 'Bluetooth Setting' icon under Settings/System and make sure both the serial ports are activated. Note which COM port is 'Outbound', then re-pair with your GPS device. Start TT and in the GPS settings panel, you should get things running by selecting the COM port that was marked for Outbound.
Unless you are running some third party software with virtual BT COM ports, that should get you up and running. If you are, try each COM port one by one. Don't hurry through the ports, but give it time to connect. 5-10 seconds at least. Also make absolutely sure your GPS is within range and has a satellite fix, or you are wasting your time.
I cant use tomtom 5 as a route map
I just want to use it sometimes without the gps module is it possible. Because with the older version it was possible to select a GPS simulator.
THX :lol:
The "unofficial" versions of TomTom5 doing the rounds seem to have been taken from beta builds. I installed without any problems, but noticed a number of bugs (not recognising GPS, the program freezing, picking up wild GPS info, settings not sticking)... sometimes you'd think it was working, and you'd think you'd got it stable, but then they'd fall down.
I've tried 3 different versions doing the rounds right now and none of them are stable. I'll wait a month or so for a more finished release is available.
i got my hands on TT5 aswell, the program looks realy nice and lot improvement to TT3, but as mentioned above, it's not very stable, spontain exiting of TT5 is not cool when youre in the middle of no where.
my gps was recognized directley,
i just went to BT settings and checked Com5 and a messege apeared that i must bond with a compatible device, so i bonded with my GPS reciever and in the TT wizard i could chose Com5 and it connected right away, much easyer than TT3
regards.
Hi,
I am considering getting TOMTOM5 for my T-Mobile MDA Compact and would like to use this in my car. Does anyone know or can provide screen shots of what the display looks like? Is it easily readable while driving?
Thanks
Msuk
Hi all,
I'm using previously an O2 mini (Magician) with a Holux 236 receiver and its working pretty fine.
But when I actually switched to TyTN (since its a WM5), problems always occur, as if GPSProxy cant get hold of a free comms port
"Error loading virtual COM port driver for COM2"
If I do a soft reset and start GPSProxy straight after a reboot, GPSProxy will manage to secure a com port for routing, but if its after maybe 10 - 15 mins, you'll get the above error message.
I actually even tempered the registry with solutions from Andrew but it didn't really help as well.
Anyone has any solutions to walk around this?
I'm using GarminQue without GPSProxy.
Set the serial COM to COM9.
It works perfectly.
Although i'm not using for a long period of time.
Just trying to find out whether it works or not.
How did you use GarminQue without GPSProxy? What GPSr are you using? I am interested to learn the technique of using GarminQue without GPSProxy and any help would be appreciated
tjongi said:
I'm using GarminQue without GPSProxy.
Set the serial COM to COM9.
It works perfectly.
Although i'm not using for a long period of time.
Just trying to find out whether it works or not.
Click to expand...
Click to collapse
You're using the default GPS options from Connection I presume?
I'm using Garmin Que 2.90 paired with Garmin GPS 10 Bluetooth.
Just get Garmin GPS 10 BT paired with my Tytn.
Set an outgoing port to COM9.
Then start Garmin Que -> Menu -> System Setup -> Interface
Select COM9 as Communication Port.
After all set, I can start receiving data from GPS.
That's all.
I'm using GPSGate with my TyTN and BT-338 GPS receiver. Works perfectly with Garmin Que 2.9 and very easy to setup.
Ordered today on upgrade and it arrives b4 1pm tomorrow.
As the Ameo has in built GPS do I just purchase TomTom 6 and install?
I didnt even know the Ameo had GPS as standard till after I ordered. Bonus, as I dont own a GPS device myself.
Spitwroot said:
Ordered today on upgrade and it arrives b4 1pm tomorrow.
As the Ameo has in built GPS do I just purchase TomTom 6 and install?
I didnt even know the Ameo had GPS as standard till after I ordered. Bonus, as I dont own a GPS device myself.
Click to expand...
Click to collapse
I have been told Ameo GPS is disable, and won't be enable in the future as well, can All Ameo user confirm this?
Dutch Ameo has GPS. I checcked it with iGo2006.
T-mobile AMEOS GPS is great, I know it works with TomTom 6 and MN6 very well.
Regards
Rainer
Does TomTom 6 work well and is it responsive?
Dont know about TomTom but I tried it with GPS Tuner and it works verry good. Even had 4 sats inside the house really funny.
I just LOVE this device
BadKarma said:
Dont know about TomTom but I tried it with GPS Tuner and it works verry good. Even had 4 sats inside the house really funny.
I just LOVE this device
Click to expand...
Click to collapse
Wait Wait, for those people who say their Ameo has GPS, are you using the UK version? I am only been told the UK version don't have GPS, but Ameo Germany or the rest should be fine. Please comfirm this.
wu5262 said:
Wait Wait, for those people who say their Ameo has GPS, are you using the UK version? I am only been told the UK version don't have GPS, but Ameo Germany or the rest should be fine. Please comfirm this.
Click to expand...
Click to collapse
Hi wu. I'm having problems locking onto the satellites that it does pick up, but I've only tried indoors so far, so will go outside in a minute to test it out fully. Using TomTom6. But a reviewer on 4winmobile has bought a UK version too and has reported that TomTom5 works very well on his Ameo on com port 5 using the wired other device setting. Just a quick one...did you download updates via Quick GPS first or after, or not all? and do you activate anything else first or do you load TomTom up straight away? what version are u using?
mackaby007 said:
Hi wu. I'm having problems locking onto the satellites that it does pick up, but I've only tried indoors so far, so will go outside in a minute to test it out fully. Using TomTom6. But a reviewer on 4winmobile has bought a UK version too and has reported that TomTom5 works very well on his Ameo on com port 5 using the wired other device setting. Just a quick one...did you download updates via Quick GPS first or after, or not all? and do you activate anything else first or do you load TomTom up straight away? what version are u using?
Click to expand...
Click to collapse
Well, firstly, i update the QUICK GPS first, then i just load TomTom, it work straight away
wu5262 said:
Well, firstly, i update the QUICK GPS first, then i just load TomTom, it work straight away
Click to expand...
Click to collapse
OK just went outside and within 30 seconds I got a couple of satellites and before the minute was up I had locked into 5 or 6 satellites! It's working beautifully. Just remembered that I always had problems with weak signal where I live until I drive about 3 minutes away and then I get a load more satellites being locked into. So, UK AMEO DEFINATELY HAS GPS activated and works with TomTom 5 and 6.
mackaby007 said:
OK just went outside and within 30 seconds I got a couple of satellites and before the minute was up I had locked into 5 or 6 satellites! It's working beautifully. Just remembered that I always had problems with weak signal where I live until I drive about 3 minutes away and then I get a load more satellites being locked into. So, UK AMEO DEFINATELY HAS GPS activated and works with TomTom 5 and 6.
Click to expand...
Click to collapse
Good to hear that !!!!! Looks like T-mobile UK don't know what they are talking about.....shame on them
I bought my Ameo few weeks back, can any one tell me what "Quick GPS" is for , i am a new GPS user. How can it get my location by connecting thought internet/phone? As i understand GPS information shoud be directly recieved from the satellite. Please correct me if i am wrong!
Thanks in Advanace
The QuickGPS application downloads the satelite positions, and helps you speeding up the process of getting the GPS fix.
UK Ameo Has GPS
My UK Ameo has GPS and it works fine with TomTom 5.21 (which I installed).
-Krip
...so, anyone has been able to use it with google maps? on which port? i haven't been able to get it together....
thanks for your feedback!
lutz
Spitwroot said:
Does TomTom 6 work well and is it responsive?
Click to expand...
Click to collapse
Yes, TomTom works great on my Advantage. I went out and purchased the US/Canada package for $150. Love it.
lutzh said:
...so, anyone has been able to use it with google maps? on which port? i haven't been able to get it together....
thanks for your feedback!
lutz
Click to expand...
Click to collapse
To my knowledge, no one has figured out how to get Google maps to work with GPS on the Athena. We all are using Microsoft Live Search for the PocketPc.
anilk said:
My UK Ameo has GPS and it works fine with TomTom 5.21 (which I installed).
-Krip
Click to expand...
Click to collapse
Hi, I have just got a Ameo in the UK but can't get TomTom 5.2 working. Would you mind detailing the settings you used (both in the Windows GPS program and in the TomTom program)?
I also can't get the MS live search GPS to work. Does it work in the UK for you?
Thanks for your help.
UK Ameo TomTom5.2 works OK.
tfotherby said:
Hi, I have just got a Ameo in the UK but can't get TomTom 5.2 working. Would you mind detailing the settings you used (both in the Windows GPS program and in the TomTom program)?.
Click to expand...
Click to collapse
My Mistake, TomTom 5.2 on a UK Ameo does work - It just looked like it wasn't because it hadn't found a fix yet. The TT5 error message ("GPS device not found" displayed in the top left corner) is a little misleading!
Once I got into a less built up area, after about 5 minutes, 4 satelites were found (none were found inside my office or in a bus or even in Reading Town Center).
This is good news!!!!!!!!!!!
PS: To help others, I had the Windows GPS settings set to:
* GPS program port: COM5
* GPS hardware port: (None)
* Baud rate: 4800
* Manage GPS automatically: ticked
And the TomTom5.2 GPS configurations set to:
* GPS hardware: "Other NMEA GPS"
* GPS baud rate: 4800
* GPS is connected to: COM5
tfotherby said:
My Mistake, TomTom 5.2 on a UK Ameo does work - It just looked like it wasn't because it hadn't found a fix yet. The TT5 error message ("GPS device not found" displayed in the top left corner) is a little misleading!
Once I got into a less built up area, after about 5 minutes, 4 satelites were found (none were found inside my office or in a bus or even in Reading Town Center).
This is good news!!!!!!!!!!!
PS: To help others, I had the Windows GPS settings set to:
* GPS program port: COM5
* GPS hardware port: (None)
* Baud rate: 4800
* Manage GPS automatically: ticked
And the TomTom5.2 GPS configurations set to:
* GPS hardware: "Other NMEA GPS"
* GPS baud rate: 4800
* GPS is connected to: COM5
Click to expand...
Click to collapse
Not sure how much it matters, but the baud rate is supposed to be 9600.
I have recently installed TT7 with the v7 map.
The thing is i can´t configure TT7 to use the built in receiver opion.
To make it work i have to manually configure the GPS reveiver in TT.
I use the black version of TT7...
Any workaround for this?
It's the only working configuration for p3600
- "altri gps NMEA" - com9 - 4800 baud -
I think that tomtom 7 is optimized for htc diamond and it has a different internal gps chip.
But working and this is good
4800 or 9600 baud???
I´m using 9600 baud, why do you use 4800?
I'm also using 9600Baud works fine here....
Actually this only occurs if you use the repack 3 of the original TT7 port (from Touch diamond).
I loaded this today as I had re-flashed my ROM and wanted to try the re-pack.
I have since gone back to the original port and TT7 doesn't need any set-up for the GPS receiver....it automatically selects the uilt in unit.
By the way....after a bit of research it turns out the re-packs were done for 2 reasons. One was to allow devices which were not on the original approved device list (hence they wouldn't load) and secondly to allow the use of maps aquired by other means.........
I am going to stay with the clean original........it works just fine for me....
Problem With Mine Too
ok i have:
TomTom 7 v.7.450 (9028)
map: iberia-13 v.720.1803
GPS settings:
gps program port: com1
gps hardware port: com9
baud rate: 9600
now i installed it perfectly, it opens perfectly
but now it dosent pick up any GPS signal
what should i do? any solutuion?
LAMM44 said:
ok i have:
TomTom 7 v.7.450 (9028)
map: iberia-13 v.720.1803
GPS settings:
gps program port: com1
gps hardware port: com9
baud rate: 9600
now i installed it perfectly, it opens perfectly
but now it dosent pick up any GPS signal
what should i do? any solutuion?
Click to expand...
Click to collapse
Which Tomtom7 version did you use? If you used the re-pack3 verssion you need to set the GPS receiver (in Tomtom) to Other Nema GPS.
If it is the standard Tomtom7 from the Kaiser thread it should find the internal GPS receiver without you doing anything.
finnaly working
ok
1º thank you Andych for giving me that hint
2º i whant to say that i had to change my WM version from
001TNYSXY - CE OS 5.2.19588 (Build 19588.1.1.4) WWE
to
Trinity WM 6.1 Diamond edition by Akeo V2 ---- v2 because v3 is off line still
and made some changes for ex:
took out:
TomTom 7 v.7.450 (9028)
and put in:
repack 3 of the original TT7
map: iberia-13 v.720.1803
GPS settings:
gps program port: com1
gps hardware port: com9
baud rate: 9600
and set the GPS receiver (in Tomtom) to Other Nema GPS
thank you all
i've tested 4800 and 9600 baud without difference so i use 4800 but 9600 works fine too.
Internel GPS
Work the internal gps with the repack 1 or 2 version???
I'm using TT7 v.7.450 (9028)
Other NMEA GPS
Baud Rate: 115200
COM9
Works perfectly, in fact seems to get a signal quicker than it did with TT6.
PS - Using ROM 007TNYSTD
I ve testet the black cap with the NMEA gps settings and is is very slow.
Then a reinstalled the black cap to the original tt 7 i have imediatly a signal with the iternal GPS.
The original TT7 is much faster than the black editions.
I got the black TT7 from this forum....
I didn't know there were other versions but it does seem rather slow.
Make My Day!, could you give me a link to the version that you say is faster than the black one please?
I mean that was the original CAP ( 1 link )
http://forum.xda-developers.com/showthread.php?t=401679
but you musst find the original (better) exe^^
I cant find it any longer. its delete from server where i find it.
Black repack edition: gps fix coldstart longer then 1 min only NMEA settings
original cap : gps fix very coldstart 5- MAX--> 10 seconds with Internal GPS
Ok well I'll try and find a version that isn't black then if that means I can get a quicker fix... Thanks for your help.
Make My Day! said:
I mean that was the original CAP ( 1 link )
http://forum.xda-developers.com/showthread.php?t=401679
but you musst find the original (better) exe^^
I cant find it any longer. its delete from server where i find it.
Black repack edition: gps fix coldstart longer then 1 min only NMEA settings
original cap : gps fix very coldstart 5- MAX--> 10 seconds with Internal GPS
Click to expand...
Click to collapse
Hmmm... a very rapid gps fix coldstart could be because gps are always active .... What is the battery life with the original cap?
are people dyslexic on here its original CAB not CAP
jojordy said:
Hmmm... a very rapid gps fix coldstart could be because gps are always active .... What is the battery life with the original cap?
Click to expand...
Click to collapse
No the GPS is off only you start tomtom it start too.
The Batary life is very long.
But the 1 start after insatll it can be that you musst wait for the signal becouse tomtom musst search the satelites.
Can't fin the TT7 original CAB
Can anyone give the link, or link here the original CAB so we can tast that?
Chaplan said:
Can anyone give the link, or link here the original CAB so we can tast that?
Click to expand...
Click to collapse
http://www.4shared.com/account/file/52017805/504b2906/ttn7.html
hi
i installsed iGO8 on pharos and it won't run
the installation worked on 2 artemis and on an asus mypal
but it doesn't work on pharos,the start screen appears,in the bottom right stays init app and it crushes
did anyone had the same problem,does iGO8 work at you guys
thanks
On mine, it works fine. No problem with iGo8
have you flashed rom or are you on a shipped one
I have not flashed my rom.
works fine on my pharos...
tested with all my ROMs
iGO8
Works fine with the original rom.
By the way:
In which folder do I have to put the map files on a storage card?
Mine are not detected...
use4s said:
Works fine with the original rom.
By the way:
In which folder do I have to put the map files on a storage card?
Mine are not detected...
Click to expand...
Click to collapse
mine is in "iGO8\Conent\Map"
bye
mine fine too,perhaps you should try download another igo8
Where can you download igo v8 ? ( by mp)
iGo8 and intern GPS
Hi,
at first sorry for my english!
I have problems with iGo8 (the newest version) on pharos! Programm doesn´t crash but iGO8 can not find the intern GPS (HTC P3470 is new). Also Quick GPS doesn´t work!
So i installed my bluetooth GPS mouse - iGO8 works fine on pharos!
On my Trinity, i have no problems. IGO8 works very quick!
My settings on Trinity:
GPS programm port: GPD1
GPS hardware port: COM9
Baud rate: 115200
Manage GPS automatically: yes
Please can anyone tell me the settings for GPS on pharos?
Many thanks
gek33
do you have a pharos from Orange, with a different rom than the original?
gek33 said:
Hi,
at first sorry for my english!
I have problems with iGo8 (the newest version) on pharos! Programm doesn´t crash but iGO8 can not find the intern GPS (HTC P3470 is new). Also Quick GPS doesn´t work!
So i installed my bluetooth GPS mouse - iGO8 works fine on pharos!
On my Trinity, i have no problems. IGO8 works very quick!
My settings on Trinity:
GPS programm port: GPD1
GPS hardware port: COM9
Baud rate: 115200
Manage GPS automatically: yes
Please can anyone tell me the settings for GPS on pharos?
Many thanks
gek33
Click to expand...
Click to collapse
see my thread in Pharos. I use tt6 and igo 8. first set you extern gps in systems : software 4 hardware none. In tt choose other nmea en com4. In igo8 choose 4. Everything works fine for me. I am a woman of 62 so you can do it to. Otherwise sent me a email.
farukb said:
hi
i installsed iGO8 on pharos and it won't run
the installation worked on 2 artemis and on an asus mypal
but it doesn't work on pharos,the start screen appears,in the bottom right stays init app and it crushes
did anyone had the same problem,does iGO8 work at you guys
thanks
Click to expand...
Click to collapse
instal first GPSGATE run IGO
WORK
Listen Carrefully
Dear all!
Thank you but it does not work on ORANGE sold Pharos.
Any other HTC 3470 sold by non ORANGE operator it will work.
Ok??? Do you Understand?
Thank you for sharing with us your experience.
Yes, just installed the iGO 8 v8.3.2.64873 and it works perfect.
iGO8 didn't work correctly on my Pharos 619 until I installed Port Splitter. It couldn't find the built in GPS. It also helps if you are outside or next to a large window.
http://www.gpsmeter.com/index.php?page=portsplitter
Port Splitter is free so at least you can see if it works for you.
iGO8 v 8.0.0.49545 works fine on my 3470 Pharos