Anyone with WM6 (Atom Life), please confirm. - iPAQ rw6828, XDA Atom General

Problem #1
Tapping the Start Menu does not product any clicking sound (unlike WM5 and WM 2003SE). While the Start Menu is displayed, clicking any item in it also does not product any clicking sound. Is this the correct behaviour? Anyway, I found the MenuPop.wav in Windoes folder.
Problem #2
The Alarm1, Alarm2, Alarm3, Alarm4, Alarm5 comes in different format where Alarm1, Alarm3 and Alarm4 are in WMA while Alarm2 and Alarm5 are in WAV. Weird huh?
Thanks in advance to anyone who replied.

programatix said:
Problem #1
Tapping the Start Menu does not product any clicking sound (unlike WM5 and WM 2003SE). While the Start Menu is displayed, clicking any item in it also does not product any clicking sound. Is this the correct behaviour? Anyway, I found the MenuPop.wav in Windoes folder.
Problem #2
The Alarm1, Alarm2, Alarm3, Alarm4, Alarm5 comes in different format where Alarm1, Alarm3 and Alarm4 are in WMA while Alarm2 and Alarm5 are in WAV. Weird huh?
Thanks in advance to anyone who replied.
Click to expand...
Click to collapse
hi!
sound n notification, click screen sound is not inof?

alipi2007 said:
hi!
sound n notification, click screen sound is not inof?
Click to expand...
Click to collapse
Hi,
Previously with WM5 and WM 2003SE, even when the "Enable sounds for Screen taps" is not enabled, clicking the Start Menu will play a clicking sound. Clicking on the item in the Start Menu will also play a clicking sound. The sound played is not the same as the sound played for screen taps.
Thanks.

i have the exact same problem as u had ...... any solution ? and i found out is kinda slower compare when using wm5

No solution yet. Hah ha... it kinda weird when you tap the Start button and no sound is produced... well that if you have used WM2003 and WM5 for years.

programatix said:
Hi,
Previously with WM5 and WM 2003SE, even when the "Enable sounds for Screen taps" is not enabled, clicking the Start Menu will play a clicking sound. Clicking on the item in the Start Menu will also play a clicking sound. The sound played is not the same as the sound played for screen taps.
Thanks.
Click to expand...
Click to collapse
you can try this,after run soft reset.it works on my atom life.

ymchow said:
you can try this,after run soft reset.it works on my atom life.
Click to expand...
Click to collapse
it works.. but the sound is not like WM5. anyway inof

thx! it works

Related

Calendar gives no reminders on Jasjar

Hello,
I am new on Windows Mobile, coming from Nokia 9500, so I feel a little bit stupid, because maybe I did something wrong.
So when I set a reminder in the calendar I hear nothing any more, neither a notification... abslutely nothing.
The reminders on Outlook on the PC just work normally on the same appointments.
Settings:
[email protected]:
Events : on ---- Programs + Notifications : on
Screen taps and hardware buttons :| off
Tab notifications, Event: reminders: Plays sound : on Alarm1
Dislplay message on screen and flashlight both are on
I did a soft reset, and I played a little bit with different sounds when the problem seemed to have begun.
When the PC however does the alarm it nicely switches the alarm off in the Jasjar.
My phone is quite useless without a calendar warning.
Huib
My Jasjar becomes quite useless without an agenda that warns
Nobody has a clue?
I can set the agenda but nothing happens. The time just passes but no warnings whatsoever.
Huib
Oh hell, sounds like the alarm bug may be making an appearance on WM5...that would be DISASTEROUS.
Do this for us; download trial version of Pocket Mechanic (www.antontomov.com) and go to the notifications queue module. Click the button marked "Dup" or "duplicates" and tell us if it found any dups, and if so what they are (they will be tagged and yellow).
Just in case it's a stupidly simple thing, check the following;
- Can u play the alarm1.wav file from file explorer?
- Are you DEFINITELY setting a reminder for each agenda entry
- Is this reminder set to go 0 minutes before (ie don;t set a reminder for 5 mins time with an alarm for 30 mins before)
- settings>sounds&notifications>alarms>ticked
- Volume not 0: turn volume to 0 then back up again
craigiecraigie4 said:
Oh hell, sounds like the alarm bug may be making an appearance on WM5...that would be DISASTEROUS.
Do this for us; download trial version of Pocket Mechanic (www.antontomov.com) and go to the notifications queue module. Click the button marked "Dup" or "duplicates" and tell us if it found any dups, and if so what they are (they will be tagged and yellow).
Just in case it's a stupidly simple thing, check the following;
- Can u play the alarm1.wav file from file explorer?
- Are you DEFINITELY setting a reminder for each agenda entry
- Is this reminder set to go 0 minutes before (ie don;t set a reminder for 5 mins time with an alarm for 30 mins before)
- settings>sounds&notifications>alarms>ticked
- Volume not 0: turn volume to 0 then back up again
Click to expand...
Click to collapse
I may do the antontomov later.
yes I can play alarm1.wav from file explorer.
OK: appointment duration from 16:00 till 16:05
alarm ( " reminder" it is called) 5 minutes before..
at the settings I ticked the Reminder event on play sound and repeat.
I do not see a volume option however.
I see options for flash light ( did never work) and vibration ( the same) I have the feeling it is not so much a sound problem as a problem that nothing is triggered when the moment is there.
Huib
Calendar Reminders confusing!!
I find this calendar thing pretty confusing too. I came to the conclusion that the reminder comes in the form of an on-screen notification and not an alarm, which seems pretty stupid, as you don't want to keep pulling your phone out to see if you have any appointments! :?
I hope I'm wrong, but could someone more knowledgeable in this area please clarify how to get an audible reminder in conjunction with an on-screen one please. And for the record, I know how to set a basic alarm, I just need to be reminded by sound or vibration of my appointments, else I can't get the true benefits of a personal digital assistant!
Wont modifying the "Reminders" settings in the notification tab of "Sounds and Notifications" do it for you???
Re: Calendar Reminders confusing!!
mackaby007 said:
I find this calendar thing pretty confusing too. I came to the conclusion that the reminder comes in the form of an on-screen notification and not an alarm, which seems pretty stupid, as you don't want to keep pulling your phone out to see if you have any appointments! :?
I hope I'm wrong, but could someone more knowledgeable in this area please clarify how to get an audible reminder in conjunction with an on-screen one please. And for the record, I know how to set a basic alarm, I just need to be reminded by sound or vibration of my appointments, else I can't get the true benefits of a personal digital assistant!
Click to expand...
Click to collapse
I am sure it gave me an audible alarm before I ran into problems. Of course the agenda can warn you if working properly; also with a flash light even(!) or vibrato.
Huib
sub69 said:
Wont modifying the "Reminders" settings in the notification tab of "Sounds and Notifications" do it for you???
Click to expand...
Click to collapse
Well to be honest.... I have managed to get sound working on it before...I just can't remember what I did! :lol:
Please, if anyone has the time please explain how I get an alarm to ring in conjunction with the on-screen reminder. For example, when I go go into the calendar app and see the time slots for any given date, I assumed you could simply enter what you wanted reminding of, in that particular timeslot, and then choose to be reminded every 2 hours or something!!??!! I'm a bit perplexed by this. My SE700i worked in this fashion and I never got to grips with the PPC way of doing this. The bloody manual doesn't explain this either!
mackaby007 said:
sub69 said:
Wont modifying the "Reminders" settings in the notification tab of "Sounds and Notifications" do it for you???
Click to expand...
Click to collapse
Well to be honest.... I have managed to get sound working on it before...I just can't remember what I did! :lol:
Please, if anyone has the time please explain how I get an alarm to ring in conjunction with the on-screen reminder. For example, when I go go into the calendar app and see the time slots for any given date, I assumed you could simply enter what you wanted reminding of, in that particular timeslot, and then choose to be reminded every 2 hours or something!!??!! I'm a bit perplexed by this. My SE700i worked in this fashion and I never got to grips with the PPC way of doing this. The bloody manual doesn't explain this either!
Click to expand...
Click to collapse
You're absolutely right about how to set the reminder, but the type of reminder (sound, message, vibrate) is set in Settings > Sounds & Notifications > Notifications Tab > Change Event to "Reminders" and see what the settings are? Give it a go, I'm sure you must have "Display message on screen" ticked and "Play sound" unticked?
sub69 said:
Wont modifying the "Reminders" settings in the notification tab of "Sounds and Notifications" do it for you???
Click to expand...
Click to collapse
Thanks for thinking about my problem but I checked those settings out very prcisely.
I have ticked: play sound and repeat. I also have the display message ticked. I Use Alarm1 to keep it simple.
It is however possible that here is where the problem started.
Other problem, maybe related, is, that the phone ringtone sound can sometimes change in the last installed personal ringtone.
I changed it back of course.
I have a lot of people given a ringtone with their name in it, to take away the need of opening to see who is calling.
instead of a sound I record : this is John etc etc. But of course not new to your guys.
Works great, but sometimes my phone ring changes in e.g. " peter calling" as main ring tone.
But in the calendar case there is not even a reminder on the screen. The phone is just no triggering at all.
huib
Huib
Oh....baffled then. Sorry!
Re: I'll get to the bottom of this yet!!
sub69 said:
the type of reminder (sound, message, vibrate) is set in Settings > Sounds & Notifications > Notifications Tab > Change Event to "Reminders" and see what the settings are? Give it a go, I'm sure you must have "Display message on screen" ticked and "Play sound" unticked?
Click to expand...
Click to collapse
Nope all are checked! I'll look into it more seriously later today and post my findings back here. Thanks for your help. :lol: :x :? 8)
SOunds like hard-reset time dudes!
Just in case you think it's a missing feature that you have to live with, it's not: the calendar DOES alarm for every reminder, provided you set that. You get an on-screen notification and sound - depending on your settings. Further, this can be defaulted so that every new appointment does this without you having to think about it. Exactly the same as all previous PPC devices.
I had the same problem.
Hard reset is the only solution...
Be carefull what s/w you install on Jasjar!
geovass said:
I had the same problem.
Hard reset is the only solution...
Be carefull what s/w you install on Jasjar!
Click to expand...
Click to collapse
-Listpro
-Ewallet
-SPB GPRS monitor
Thats it!
Any of those three suspect?
Huib
geovass said:
I had the same problem.
Hard reset is the only solution...
Be carefull what s/w you install on Jasjar!
Click to expand...
Click to collapse
This will be my first reset in Windows world ever.
Any tips and hints what to take care of before pushing the button?
I come from Nokia 9200 and up and there was a great backup facility before you hard reset.
As backup software is not available: Any tips and hints on what to write down before I do it?
I also saw that Windows may come with separate upgrade software.
http://www.expansys.nl/forumthread.asp?code=119353&thread=69
(AKU1/AKU2)
Any use to wait for that first?
Huib
herpi said:
geovass said:
I had the same problem.
Hard reset is the only solution...
Be carefull what s/w you install on Jasjar!
Click to expand...
Click to collapse
-Listpro
-Ewallet
-SPB GPRS monitor
Thats it!
Any of those three suspect?
Huib
Click to expand...
Click to collapse
The only s/w i had was the ewallet.
Get rid of it and reset. Now try if it works.
geovass said:
The only s/w i had was the ewallet.
Get rid of it and reset. Now try if it works.
Click to expand...
Click to collapse
You meant soft reset or hard reset?
I presume hard reset, because after several soft resets without ewallet I still have the problem.
huib
See 'Help' application for Reminders in Calendar!!
Stupid me! There's an in depth guide on hoe to use the calendar with Reminders in the 'Help' application on the Jasjar. Too many options for my liking, just confusing matters. basically, alot of the options are for syncing purposes and if no else has access to your PC, it really won't matter wether you set-up categories or not, unless you need your contacts etc grouped.
Bottom line, buy an easier to use application.
Alarm bug? What's that?
Some time ago I installed and played a NES emulator on my xda for a few hours wearing the headset, and after that two things happened; Sound didn't work, it got permanently stuck on headset mode (I fixed that) and 2), the clock disappeared from the upper menu bar, never to return. Alarms didn't work (at all) from that point either. Prior to this it had worked 90% of the time, with some mysterious exceptions that I think maybe your "alarm bug" could explain.

Sounds and Notification Applet

I have an HTC TYTN and when I got into the Sounds and notification applet under settings and select an event then select a sound then click the play button no sound is played.
I figured maybe the sounds weren't in the \windows directory but I checked and all of the sounds are there and if I click on the sounds through the windows directory, they play just fine so I know they are not corrupt. I tried to find a posting mentioned maybe a registry key that points to the location of these sounds to see if maybe that is messed up or something. Anyways, I don't get any sounds during specific events like sending or receiving text messages even when everything is turned on because of this.
Anybody come across this issue before?
Thanx!
Nevermind.......
Problem solved. User error.
how do u solve it ... same problem here...
My guess, turn volume back UP......

Set my own music as a alarmtone

Hey There,
Does any body know if it's posible to choose your own music to set as a alarmtone?
so yes, where can i find the settings.
whats the name of the file that contains the alarmtones?
i hope somebody can help me.
Thnx
selhartm said:
Hey There,
Does any body know if it's posible to choose your own music to set as a alarmtone?
so yes, where can i find the settings.
whats the name of the file that contains the alarmtones?
i hope somebody can help me.
Thnx
Click to expand...
Click to collapse
No settings here. Convert your mp3 file into wav. Then just copy-paste your new file in windows folder. You will find the new desired audio file in alarm settings.
Hope I was useful.
You can simply go to the "Music" Touch Flo tab and then select the lower left button "library".
Select a song and click the "Menu" button. There you will find an option to use the song as ring tone.
SlappyHours said:
You can simply go to the "Music" Touch Flo tab and then select the lower left button "library".
Select a song and click the "Menu" button. There you will find an option to use the song as ring tone.
Click to expand...
Click to collapse
C'mon man. He was talking about ALARM TONE, not ring tone. Pay attention.
I did pay attention here , but how about incoming message ton?
pygmalion said:
C'mon man. He was talking about ALARM TONE, not ring tone. Pay attention.
Click to expand...
Click to collapse
Yes, sir...
Thanks all of u
yes i ment the alarmtone (wake-up signal)
try the g-alarm.
try this
http://www.ageye.de/index.php?s=galarm/about

[problem] WM 6.5 slide lock problem: UNKNOWN CALLER ID when in suspend/power off mode

there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)

alarm only sounding once

having a problem my alarm is only sounding once and thats it,ive been late for work twice this week already,anyone help please.
cheers
Please dont start a new thread for a question that has already been asked.
Thank you
hi could you show me thread link please
Get a .wav soundfile and place it in /windows folder.
Then that ringtone will appear in the alarm's tones section, choose it, and there you go
ZaZu90 said:
Get a .wav soundfile and place it in /windows folder.
Then that ringtone will appear in the alarm's tones section, choose it, and there you go
Click to expand...
Click to collapse
mate many thanks for your help
phillyctr said:
mate many thanks for your help
Click to expand...
Click to collapse
Not a problem
Dont forget that you can convert mp3 sounds into .wav files and place them in windows as well
mate ive converted a mp3 to a wav file and placed in windows file,my song shows up in alarms and plays when i select it,when choosen for the alarm it still sounds as a single beep??any ideas,thanks again
hi, i ve got different language installed on my HD2 so i will try to translate it into english..
try going into settings, sounds, and then look for notification sounds and try to disable them.
or when you are on settings, in right down corner tap on menu, and display all settings, and then go into sounds.
i think i had the same problem - which ROM are you running? as long as i remember it change when i flashed 1,48 rom...
noodles222 said:
hi, i ve got different language installed on my HD2 so i will try to translate it into english..
try going into settings, sounds, and then look for notification sounds and try to disable them.
or when you are on settings, in right down corner tap on menu, and display all settings, and then go into sounds.
i think i had the same problem - which ROM are you running? as long as i remember it change when i flashed 1,48 rom...
Click to expand...
Click to collapse
mate worked a treat.many thanks
ZaZu90 said:
Get a .wav soundfile and place it in /windows folder.
Then that ringtone will appear in the alarm's tones section, choose it, and there you go
Click to expand...
Click to collapse
This makes the alarm sound longer, but it still only sounds once. There is no option for "make the sound repeat forever" or "repeat the sound for 2 minutes".
noodles222 said:
hi, i ve got different language installed on my HD2 so i will try to translate it into english..
try going into settings, sounds, and then look for notification sounds and try to disable them.
or when you are on settings, in right down corner tap on menu, and display all settings, and then go into sounds.
i think i had the same problem - which ROM are you running? as long as i remember it change when i flashed 1,48 rom...
Click to expand...
Click to collapse
what about then the calendar alarms? will they go off if you disable notification sounds?
have you checked the following:
go to:
settings > menu > all settings > clock & alarms > alarms tab
click on the little bell above the time..
see if "repeat sound" is checked
bel_z_bub said:
have you checked the following:
go to:
settings > menu > all settings > clock & alarms > alarms tab
click on the little bell above the time..
see if "repeat sound" is checked
Click to expand...
Click to collapse
it is but...
... this allows the alarm to be played only twice insteda of once
... my question was different: if i set notifications to off, will the calndar reminders play?
Download an audio editing program like Audacity and loop the file 20 times. This should do the trick.
Is it just me or is the windows mobile alarm really incompetent waking people up??
It would be nice if it could read MP3 files and play infinte times...
Looks like a bug,,,
Set an alarm by using the link on the manila home screen. Choose a sound for that alarm.
Now go settings - menu - all settings - clocks and alarms - alarms - tab and edit the alarm you have just set, , no sound selected, which means that the 'repeat and vibrate ' option below it isn't repeating the sound we set in the manila alarms screen. Choose a sound here and it works.
EDIT - OK, ignore the above, no it doesnt, it just plays both sounds, twice, then waits a minute then plays them again, then nothing.
Does ROM 1.66 fix this problem?
skyhew said:
Does ROM 1.66 fix this problem?
Click to expand...
Click to collapse
no, it doesn't I'm afraid...
bronx said:
no, it doesn't I'm afraid...
Click to expand...
Click to collapse
This cannot be fixed by HTC: it is a WM issue...
then please tell me why I haven't got this issue with any other winmo devices, huh? it is htc who's responsible for rom on leo, not ms.

Categories

Resources