hay all i am new to all this so i have obviously missed something out, i have downloaded WM6 crossbow reloaded 1.7 and ran it.
the rom update went smoothly but when the device reset it still had WM5 what have i done wrong?
Thanks
is ur device CID unlocked?
Related
I have upgraded my ATT SiemensSX56 to Pocket PC 2003. Is it still safe to use the XDA-developers Special Edition ROM v1.2 on this Poocket PC to unlock the SIM?
try the tool at www.xda-developers.com/XDAunlock/ first
XDAunlock
Thanks for the suggestion. That would have been great if it had worked. I tried to run it but it gave me the error “error getting unlock code”. I think that the reason was that don’t have a Qtec 1010 Rom version 3.16.52. My ROM version is A.30.09 ENG. The reason that I put this post out was that I wanted to ask around a little before I ran the XDA-developers Special Edition ROM v1.2 on my ATT Siemens Pocket PC to see if anybody thought that it might cause any unwanted consequences.
It worked for me
As I just mentioned in some other post, I did just that with Wallaby 5.22. I flashed the AT&T ROM to find out the phone was still locked. I flashed the XDA ROM, unlocked the phone and reflashed the AT&T ROM. I can't guarantee it'll work for you but it certainly did for me.
XDAunlock tool works only with ROMs that has wmodem application (no WM2003 has it). XDA ser v1.2 is a good choice for unlocking, but since you are going to reflash the device then i would recommend TMO 4.01.00 for now coz A30.09 has a very annoying sound issue.
Biso007 said:
XDAunlock tool works only with ROMs that has wmodem application (no WM2003 has it). XDA ser v1.2 is a good choice for unlocking, but since you are going to reflash the device then i would recommend TMO 4.01.00 for now coz A30.09 has a very annoying sound issue.
Click to expand...
Click to collapse
Not true in all points.....
The German 4.00.33 Rom have the wmodem application. But the unlock tool do not work with it.....
Tried it already....
HTH
Stefan
Hi there, I got my O2 xda orbit 2 weeks ago from germany and I decided to change the german rom to an wwe one, but the phone got bricked and stays on the welcome screen
I think I did a CID unlock but I am not sure. I can get to bootloader but I don't know what to do. How can I put a WWE WM6 on my Orbit? and also how can I check if my battery is above 50%?
Thank you
flash device with original O2 ROM.
regards,
Ok, but the only original O2 roms that I found in this forum are WM5, the original WM on my Orbit was WM6
Have you tried using the original O2DE WM5 ROM, although I am fairly sure that O2DE were one of the first to release a WM6 ROM.
EDIT: Yes, here it is: ftp://htc_us:[email protected]_O2_DE_3.4.207.2_4.1.13.41_02.88.90_Ship.exe
So when I flash the original O2 rom, can I upgrade to an english WM6 and how?
Follow the instructions on the UPSL thread to CID unlock your device. NOTE: Best to use an XP computer, Vista will not work right.
Then immediatly flash the ROM of your choice.
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
n1k1 said:
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
Click to expand...
Click to collapse
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
O2 WM6 rom
use the O2 wm6 upgrade nothing wrong with it really go to their site and download . If you have a UK O2 orbit you will not need to CID unlock it will go on with no problem
Shand359 said:
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
Click to expand...
Click to collapse
You don't like it then that is fine, but crap? No. It is wholly stable and works absolutely perfectly.
Shand359 said:
Don't have anything new to add that hasn't been said already.........except that i don't like it. Been using B&B3.7 until last night. O2 WM6 seems like a step backwards from this ROM, not sure why
http://forum.xda-developers.com/showpost.php?p=1410662&postcount=8
Click to expand...
Click to collapse
Yes it is stable, yes it works perfectly.
I still don't like it.
B&B3.7 is very stable. It also works perfectly. plus it also works a damn site faster too.
I am entitled to my own opinion, you are to yours.
n1k1
did you recover device?
you can flash any ROM with USPL installed, read USPL manual.
regards,
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
n1k1
1. you need to flash your device with original ROM it was shipped with.
flashing is done from bootloader. activesync will be unavailable, don't bother. just start flasher and follow the wizard.
2. when device is flashed and operational, install uspl.
documentation is supplied with uspl.
3. since then, you can flash any ROM you like.
regards,
n1k1 said:
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
Click to expand...
Click to collapse
Hold TOP LEFT button and press in RESET and get device into bootloader. Can't do anything from welcome screen. Then flash the devices original ROM. After this flash USPL and the B&Bv4 as this is the best available...........as of yet anyway.
Hi
I followed uspl instructions. But after stage 1 (White screen) active sync will not connect. Phone connected to charger, still on White screen.
If advice above about bootloader is correct, could someone re-explain with simple steps.
Thanks colink
Has anyone successfully gone back to WM5 after upgrading to WM6 on an X7500? I was told by HTC that it was not possible because the bootloader was changed when I went to WM6 and now I can not go back?????
well this is totally not true, i went back to WM5 with no problem at all. after that i even changed the radio to 1.50.00 which went smoothly.
jaydeejay said:
Has anyone successfully gone back to WM5 after upgrading to WM6 on an X7500? I was told by HTC that it was not possible because the bootloader was changed when I went to WM6 and now I can not go back?????
Click to expand...
Click to collapse
utter bollocks, and I presume you're running 1.20.Olipro from step 1 of the unlocker?
my SPL is patched so you don't write over it.
Thanks...
Thanks to both who replied that what I was told about being unable to go back to WM5 after upgrading to WM6 was "bunk". I have successfully done so!
I've tried to update my HTC3600, by using the "WM6 Official - Any Device" from http://trinityguide.info, and it just doesn't work... I have updated Hard-SPL, and then tried to apply "Official Dopod ROM" ... the only thing it did was to revert my Radio-ROM back to 1.46.xxx (from 1.50.xxx i had before)...
But the OS was never updated to WM6... I have tried a bunch of different WM6 ROMs now during the weekend, nothing has helped... even tried some application to unlock CID (what is it actually ???).
The only thing I've managed is to update my own OS using the official swedish ROM (I've bought my HTC in sweden). And i've been able to update my Radio ROM to 1.46.xxx, 1.50.xxx.. as well as installing different HARD-SPL.
But i've so far not been able to install ANY WM6, or WM5 cooked ROM's .. so pleaaaaaaase help my guides... I'm starting to go nuts over this...
Appreciate any advise & help.. thanks in advance !
maybe Hard-SPL was not applied right\good
did you tried this? http://forum.xda-developers.com/showthread.php?t=293957
thats what i did first and it worked fine.. installed wm6 rom after that
I have found no working link for RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship including link given at WIKI. I have googled for above ROM but still no working link.
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Not exactly what you requested but close enough
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe (official WM6 ROM)
shahkh said:
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Click to expand...
Click to collapse
I'm sure you don't have to downgrade.
I didn't do that and nobody else I know
GAMBIT999 said:
Not exactly what you requested but close enough
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe (official WM6 ROM)
I'm sure you don't have to downgrade.
I didn't do that and nobody else I know
Click to expand...
Click to collapse
I am already using your mentioned ROM. I have tried HARD SPL and WM6_Hard_SPL.rar. I have also tried BETA3 USPL. I recieve connectivity errors though I am able to run same WM6 RUU (Ship version) successfully. In WIKI its mentioned among known problems that
UPGRADING TO WM6 FROM WM6
(PLEASE DELETE LINE IF CONFIRMED)
Not sure if this is a known\common issue but when you are upgrading from a cooked WM6 ROM to another cooked WM6 ROM you must first downgrade to WM5 otherwise you will get hung at the first boot loader screen
Weird, if your SPL is at least 4.xx.xx the HardSPL ROM should work fine with you. I flashed from original German O2 WM6 ROM to HardSPL WM6 ROM. Then I flashed to latest HTC German WM6 ROM (for a clean base) and from there to any available custom ROM.
Thats what i am unable to understand. It gives me connection error 202 on PC as soon as it goes to BOOT loader. I have seen a few other users making same complaint in HARD SPL thread of olpiro.
I have connection problems too, and they were fixed by uninstalling activesync, then redownloading it from the MS website.
http://www.microsoft.com/windowsmobile/activesync/default.mspx
Resolved
Thanks Issue has been Resolved via USPL and TOUCH IT.
shahkh said:
I have found no working link for RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship including link given at WIKI. I have googled for above ROM but still no working link.
I need above ROM as i need to go back on official WM5 ROM of mine (from WM6) before installing TOUCH IT. Any help???
Click to expand...
Click to collapse
Here is a working link
http://rapidshare.com/files/27470732/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Regards
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
shafez said:
Here is a working link
http://rapidshare.com/files/27470732/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Regards
Click to expand...
Click to collapse
Thanks man ! have a good day !
this is not good rom!