I am trying to install the new tomtom i downloaded but after i install it it says there are no maps, but when i install the 6.00 version it finds the maps ok- and they are the latest maps- i have tried to put the maps in just about every folder when installing.....
first there is a folder that says copy to sd- so i did that, and then there is a 2577 folder and a install and start file, neither of these do anything..... open the 2577 folder and inside there is1 tomtom autorun and 2 other autorun files AND a ttn and ttn2003 cabs/exes. ttn installs the program.....
where do i put the maps?
in "my documents" or on the root folder of your memory card.
done- fixed -thanks
Related
how can i move voice files from /tomtom/data13.chk to storage card? What is the command for registry? thx!!
Just search the regirstry key for "Tomtom" and make change to the path.
They are probably under HKLM\Software\Apps\Tomtom Voice ****
Move Tomtom Voice to SD card
I have same problem!
Have folder Navigator (with program .exe at SD) and at \tomtom folder the Voice files.
On my PPC don't exist that registry entry...
Someone can help?
Thanks
Move Tomtom Voice to SD card
I have same problem!
Have folder Navigator (with program .exe at SD) and at \tomtom folder the Voice files.
On my PPC don't exist that registry entry...
Someone can help?
Thanks
Move Tomtom Voice to SD card
I have same problem!
Have folder Navigator (with program .exe at SD) and at \tomtom folder the Voice files.
On my PPC don't exist that registry entry...
Someone can help?
Thanks
I am not sure exactly what you are trying to do but TomTom 5 will read voice files from a folder named "Voices" on the root of your SD card.
I just put my voice files in there and it finds them fine.
Tomtom voice location files
Hi Dingo,
No, my Tomtom 5 have a folder at \mydocuments\tomtom that have voice files inside!
The instalation program make this folder at this location!
What I want is move this location to SD card to free RAM memory on my XDAmini. At registry I can't locate an entry to move this location... this is my problem.
Thanks
Ok i see. I do not have any voice files there. I did not install any when i installed Tom Tom 5.
Instead i just copied my voice files to the "Voices" directory on my SD Card.
You should not need to change the registry as TT5 will always look for voice files in the Voices directory on the memory card first.
Have you tied making a "Voices" directory on your memory card and just moving the voice files to it ? This should work.
It's weird how TT behaves differently on our Magicians. The 'Voices' thing didn't work for me either, but I found out something else...
Try creating a folder on your SD card and call it Tomtom. Now move your voice files AND the files from the /program files/Navigator there. That's it! No changing the registry or whatever. Just create a link to the new location of the .exe and you are rolling!
Ahh i forgot the Tomtom dir. I have to have a dir called Tomtom also on the SD. Although i just leave this empty. This was originally to allow me to have full UK postcode search. So i already had that when i put my Voices in the Voices DIR.
If it works putting your voices in there then i would do that as it will save and extra DIR.
hello there,
I have searched on this and other sites. After installing TomTom Navigator 5.21 I keep getting the message that it can not find any installed maps. The maps are there, in the default folder.
Any ideas?
thanks
in saying default folder...do you mean on the root of the card that's where it should be.
br
Yes check the actual location, I installed them from the CAB and it put them under program files, so I had to move them manually before everything worked.
Dump the maps on to your sd card, do not place in any folder. That is what is meant by root of your sd card.
apple_power said:
Dump the maps on to your sd card, do not place in any folder. That is what is meant by root of your sd card.
Click to expand...
Click to collapse
Surely the maps should be in country specific folders on the SD-card. E.g.:
\Storage Card\Benelux-Map
\Storage Card\Deutschland-Map
\Storage Card\France-Map
\Storage Card\Great_Britain_Plus-Map
etc,..
This is how they were created by the TT install.
Hi Fisherking.
My maps for TT 5.21 are saved in \Storage Card\Great_Britain_Plus-Map and all works OK.
I can only suggest trying the install again.
Gavin.
Thanks guys, you made it work!
I'm using an Orange M3100 and a windows xp laptop running active sync 4.2.
The install works fine up until it tells you what it's going to install. Click next and it always crashing. I've tried on another laptop and get the same result. Even tried a mates navigator 3 and that does the same too.
Am I mising something here, since everyone else installs it fine :?
Make sure it is version 5.21, I think earlier versions are not compatible with WM5.
I get the same problem with my v1605. It is 5.21 but it does the same.
I had no problems on mine, it's 5.21 with spanish maps... have a look here:
http://forum.xda-developers.com/viewtopic.php?t=58539
My disk isn't the right version so I can't install anything from it. I've grabbed the 5.21 pach and that install's fine and i've manually installed all the cabs that I need (I think), my main problem now is the maps. I've not got a memory card yet so where's the best place to put them. Running the cabs just dumps the files in the same directory and tom tom wont find them that way.
Here is my experience with Tomtom.The maps are just copied to the sd card on the root folder with some name like. Germany-Map or Australia-Map. Tomtom only recognises any directory with a -Map ending in the folder. You can just add nice pov by just copying the files to the appropriate directory. If you want to save space in your main memory copy the tomtom executable to the TomTom directory on the sd card and most imortantly to have tomtom running is to have the currentmap.dat file in your My Documents/TomTom directory. Voices can be copid to the VOICES directory on the sd card. Hope this helps some people.
Just got my new white Trinity w/ GPS & Tom Tom. When I try to install it, I get a low memory error and install aborts. I have 41Mb storage and 21Mb program mem free.
Anyone else have trouble? Can it be installed to card?
It can be installed to the card, yes, but I never had that problem, altough I have installed TomTom many times.
I got a lot of problems but not this one !
Is this the HTC version that is downloaded on their web site ?
CD that was in the box. They have a cab file to dnload?
Tomtom refused to install on SD
I had the same problem - and the option "install into default installation folder" was checked and grayed out, so I could not tell Tomtom to install onto SD.
I backuped my Trinity, cleared the internal storage, connected to Activesync as "Guest", installed Tomtom to the internal storage, then moved the folder \Program Files\Navigator to a folder \Program Files\Navigator I created on my SD card.
After that, I restored my device. All I had to do after that was to manually add a shortcut to the Tomtom application in my Start Menu folder.
This worked for me.
Cheers Stefan
(I installed Tomtom from CAB available on the European HTC web site: http://www.europe.htc.com/support/software/htcp3600.html)
No cab file there. It is a exe that loads via Activesync. I get the same low mem error as with the CD. I have 62 Mb free. This is rediculous.
Gave up. The installer creates a temp cab in
program files/activesync/HTC apps
If you can't find it, search the C drive for *.cab and sort by date.
Copy that file while the installer is still open. Run it from the storage card. Worked fine.
Hi people,
Since I started to use my HTC X7500, I have TomTom Navigator 6, including all the needed stuff like maps and voices installed on the MicroDrive.
No problems there, but I now wanted to move the entire TomTom Navigator 6 from the MicroDrive to a 4GH MiniSDHC card.
I moved everything and TomTom starts and works, except for the voices. There are no voices!! The "VOICES" folder which was previously in the root of the MicroDrive, now is in the root of the MiniSDHC card, as it should.
Yet TomTom won't find any of the voices, so I can't access/use them.
When I place a copy of the "VOICES" folder to the MicroDrive again, TomTom WILL find the voices and can use them.
Now the question is, how can I get TomTom to use the voices from the "VOICES" folder on the MiniSDHC?
It obviously keeps looking for them on the MicroDrive.
I already uninstalled TomTom with removing all remaining .cfg and .ini files I could find, but after reinstalling the situation still was the same.
Thanks for the tips!!
try:
just copy data05 (for english) these two files. put them in the same foder where u have navigator.exe.
Thanks for the tip.
But what if I want to keep the entire (50MB or so) "VOICES" folder?
There should be a way to have TomTom forget about the MicroDrive and to use the Storage Card?
i believe u need registry editing.
royalmail said:
i believe u need registry editing.
Click to expand...
Click to collapse
Yeah.... where and what?
Searched everything containing "tomtom" and "voice".... didn't do.
JayRayMee.NL said:
Yeah.... where and what?
Searched everything containing "tomtom" and "voice".... didn't do.
Click to expand...
Click to collapse
Put them on the SD card, and delete the ini file in the voices folder before starting tomtom.
Wiz said:
Put them on the SD card, and delete the ini file in the voices folder before starting tomtom.
Click to expand...
Click to collapse
Unfortunately that didn't work..... still no voices when I try that.
The strange thing is that a new "voices" folder containing the "collected.ini" file appears on the MicroDrive when I've started TomTom.
I guess it @#@$! keeps looking on the MicroDrive.
More tips?
I'm using an ETEN X500, but I think the answer may be the same.
The collected.ini file, together with whichever DATA*.CHK file you choose, is by default placed on Main memory - in my case \Program Files\Navigator\voices
If you delete the collected.ini file, you can choose a new voice (the 50Mb file for which can be on your card) but TomTom will again by default store the new collected.ini + *.CHK files on Main Memory.
I've never found a way to change this behaviour, but the "voices" folder on Main Memory is about 650kb, so I live with it.
Ok, but why is it possible to use the voices folder on the MicroDrive then??
That was my situation at first. Since I figured everything works faster when stored on the Storage Card, I decided to move everything.
The thing is that TomTom works, but that the voices are the only thing he keeps looking for on the MicroDrive....
Even after the official WM6 ROM upgrade, the voices will only work when the folder is present on the MicroDrive.
Come on, there must be a way...... or not?
I think you should search for any folder names "voices" (usually in \Microdrive\voices, \storage card\voices, \program files\navigator\voices). Remove all of them, only keep the one you want to use (i.e. on the SD card). also make sure there is no "collected.ini" file left. This file will be re-creteated at the next Tomtom startup.
I believe Tomtom looks in the root folder of all memory devices (main memory, microdrive, sd card, etc.) for a folder called "voices".
Anyway, it does work for me (I have moved all tomtom stuff from the microdrive on the SD card too and it works).
S.
Why not try a regular (non-Athena specific) install (like 6.030 from TT direct, or 6.032 from the Kaiser)?
silviu.h said:
I think you should search for any folder names "voices" (usually in \Microdrive\voices, \storage card\voices, \program files\navigator\voices). Remove all of them, only keep the one you want to use (i.e. on the SD card). also make sure there is no "collected.ini" file left. This file will be re-creteated at the next Tomtom startup.
I believe Tomtom looks in the root folder of all memory devices (main memory, microdrive, sd card, etc.) for a folder called "voices".
Anyway, it does work for me (I have moved all tomtom stuff from the microdrive on the SD card too and it works).
S.
Click to expand...
Click to collapse
Thanks for the tip.
Tried that, ending up with the "voices" folder without collected.ini only in the root of the Storage Card.
I even deleted the navigator.cfg file from program files\navigator\ and guess what..... it didn't work!!
While running TomTom there are no voices available and when I close it again, a voices folder containing collected.ini have been created in the root of the MicroDrive and in program files\navigator again......
Then where on earth does it get its instructions from to look on the MicroDrive?? Need to kill that!!
Waht version of Tomtom are you using? I have 6.030.
silviu.h said:
Waht version of Tomtom are you using? I have 6.030.
Click to expand...
Click to collapse
6.00. Is it a version issue?
Might be, my "old" version 6.xxx (before 6.030) couldn't event find the maps when they were elsewhere than \My documents (which caused some problems as the maps are often >150 MB). You should try to upgrade to 6.030 (besides they say that the internal GPS is managed better after tghe upgrade even though I didn't notice any improvement on this topic).
I had a similar problem, it didnt matter how many files i deleted or even uninstalled, it still couldnt find my post codes or voices, but after I did the upgrade to wm6, I then reinstalled tomtom direct to sd card, and now the voices are working again, I wonder if there is a hidden file somewhere that needs to be deleted.
SOLVED!!
Well folks,
I got my hands on the latest TomTom Navigator 6.03 and the problem has been solved. I uninstalled Navigator 6.00, moved the entire "voices" folder to the Storage Card and then installed 6.03. Works a charm!! The voices are useable on the Storage Card now.
It seems to be a real "6.00 problem", since a lot of people I know have had the same problem, as well on the HP iPAQ hx4700, which has both a SD and CF slot.
Another great thing in 6.03 is the new "Internal GPS" GPS selection feature. Just select "Internal GPS" as your GPS device and the fix and accuracy is better than ever. No trouble like COM-port or baudrate, just the setting.
Happy now!!