Hi people,
For example, when I click the screen to shut it off, it only comes backs with a reminder ring but not the normal alarm ring to wake me up. I have slept in a few times because the snooze function does not work normally.
I want a program or info on how to get it where I can touch the screen and have it automatically alarm 10 minutes later without having to go in the menu and have a specific snooze time.
Thanks guys,
JW
[email protected] said:
Hi people,
For example, when I click the screen to shut it off, it only comes backs with a reminder ring but not the normal alarm ring to wake me up. I have slept in a few times because the snooze function does not work normally.
I want a program or info on how to get it where I can touch the screen and have it automatically alarm 10 minutes later without having to go in the menu and have a specific snooze time.
Thanks guys,
JW
Click to expand...
Click to collapse
Try AlarmX from MTUX.com. This has a nice interface and a snooze feature. Also the alarm sounds it has are very loud.
alarm/notification problem solution
This is caused by the sddaemon process that causes the notification queue to duplicate itself everytime the phone is turned off and back on. The program smartskey addresses this problem by going to the ini file in it you can enable sddaemon to 1 that fixes this problem, then use a program like notification clear to clear out the old duplicates.
I've tried the alarm function (Settings/System/Clock/Alarm), but it wasn’t reliable. So I switched it off again.
Now I here the alarm everytime I reboot my MDA Pro.
What’s wrong?
Try checking your "Notification Queue" for a calendar/alarm entry which hasn't been cleared. You can use software such as Memmaid or SKTools to view this. I personally prefer the first one.
Click on the first notification and see when this was due - if this falls in the past you should be able to just delete this.
HTH
Tnx! - Worked...
melino said:
I've tried the alarm function (Settings/System/Clock/Alarm), but it wasn’t reliable. So I switched it off again.
Now I here the alarm everytime I reboot my MDA Pro.
What’s wrong?
Click to expand...
Click to collapse
wow that sound like the problam i had a while back. i would get tons of random alarms right after a reboot. but it went away after i removed BBConnect., but come to think of it i stopped using the alarm clock at the same time too. i wonder which one it was.
I have captivate that runs on Firefly froyo ROM. I have an alarm set in my phone that is supposed to sound every morning. But when I reboot my phone everytime for replacing the spare battery, the alarm is not re activated. In simple works, alarm scheduled to sound everyday does not reactivate itself after reboot. Have to open the alarm, disable it and again enable to reactivate it.
Any solution for this. Also any app that solves the problem? Same thing happens with calendar reminder events. After reboot, the calendar reminder events do not work. HAve to go to the calendar app for it to activate. Any alternate apps for the problem?
Hi,
i've got a bug with this cool ROM : Alarms don't work !
last night, i program 3 alarms, and i noticed the "alarm notifier" on the Today Screen was always on "Alarm OFF"....
and this morning, no alarm ring !
a solution ?
5tef said:
Hi,
i've got a bug with this cool ROM : Alarms don't work !
last night, i program 3 alarms, and i noticed the "alarm notifier" on the Today Screen was always on "Alarm OFF"....
and this morning, no alarm ring !
a solution ?
Click to expand...
Click to collapse
well i had mine on too, and after 2 days magically it started working, and no i am not joking
Seriously there are two topics about this rom and i guess this bug has been mentioned more than ten time so i think i and a lot of other people would appreciate it if you would use the search function.
i found only this :
"alarm IS working correctly just Alarm On/Off light in Today screen works differently from previous ROMs. It shows only today's active alarm. For example, if you selected alarms for all week, except today, then Alarm light will turn off even so you have alarm tomorrow."
i use my Cruise to wake up all days at 6:30 AM.... how to setup my alarm ?
Hi ppl,
I have a big problem with alarm in my D2. If i set alarm and send D2 to stanby, alarm dont beep This is a big problem to me. I need safe batery, but i need alarm too...I try Klaxon, but i have with them the same problem. Can help me anyone? Can i set anythink to wakeup D2 when is in stanby?
thanks for answers
I know that it wont beep for text messages notifications are you using any roms if you are install advanced config and under power management set the battery usage to 10 minutes if not using a rom go to the htc website and download the sms fix
I using TD2 tools, i have sms tone fixed. But alarm is dead alltime
How i can change registry(must have any program ? ) Can i change any in registry how about change sms wake up from standby?
My ROM 1.39.479.1
Ropik said:
Hi ppl,
I have a big problem with alarm in my D2. If i set alarm and send D2 to stanby, alarm dont beep This is a big problem to me. I need safe batery, but i need alarm too...I try Klaxon, but i have with them the same problem. Can help me anyone? Can i set anythink to wakeup D2 when is in stanby?
thanks for answers
Click to expand...
Click to collapse
Have exact same problem, think there must be something related to the amount of time the phone has been in standby too, if I test an alarm, by setting it to go off in 10 mins for example, it works fine, left overnight, never works....
I had issues with the alarm after using Klaxxon and uninstalling it.
I am currently testing to try and get it working each time and seems to be ok.
I reinstalled Klaxxon ticked force remove windows alarms and intergrate applyed the changed and soft booted the phone.
I then started klaxxon again and remove both ticks and soft reset again.
I then used AlarmFixWM to remove duplicate entries from the notification queue.
Not 100% if this now works 100% but seems promising.
Im sure there is an easier way but the above its what I did.
Found this thread which seems to be related
http://forum.xda-developers.com/showthread.php?t=333521
Have installed SK tools, cleaned notification queue and set it to run cleanup auto in middle of night....
Alarm actually went off this morning...
Hardly conclusive, but gives me hope!
Odd, seems to be a longstanding WM2003/5/6/6.1 issue, not TD2 specific, but I moved to topaz from an artemis where I never had a single alarm problem... you would think if the artemis hardware could cope with my appointments list/alarms etc. then a topaz would be fine too...
P.
Alarm sounded again this morning
Happy Days...
Will post back here if problem reoccurs,
Otherwise, assume this has worked for me.
P.
Hey popkid,
Any chance you could post exactly how to do this using SK tools? I cant seem to figure it out and I have this annoying alarm problem!!!
Cheers
philaldred said:
Hey popkid,
Any chance you could post exactly how to do this using SK tools? I cant seem to figure it out and I have this annoying alarm problem!!!
Cheers
Click to expand...
Click to collapse
1) Fire up SK Tools
2) Hit Tools (Bottom Right) --> Settings
3) 2nd Tab "Automation"
4) Toggle "Notifications Queue" to "Use in Auto Mode" if it isn't already
(Take a look through other run options to run and deselect them if you don't want them running automatically)
5) Toggle "Scheduled Run" to "Yes"
6) Set time/day/date etc. to run (Mine is set to run at 3.30am every day, probably overkill!)
7) Set "Silent Mode" to "Yes"
and you are good to go
Alternatively, to fix your Notifications Queue just once:
1) Fire up SK Tools
2) Category (Bottom Left) --> Maintenance
3) Select "Notifications Queue"
4) Action (Bottom Left) --> Mark Duplicates (should be a fair few if you are having alarm problems)
5) Action (Bottom Left) --> Delete Marked
Hope this helps, post back if not!
Good Luck
Pauly
Thanks Pauly, ill see if G-alarm wakes me up in the morning!!
Dunno if you guys can help, i got Klaxon and alarm is fine, but if i snooze using shake then it never goes off again!
Can you show me your settings or give me any ideas?
My solution: Whatever alarm you have, install HTCPedia Topaz Setting Tool, go to Power Settings and set AC Resuming and Battery Resuming to 20 seconds, works EVERY DAY for me with Klaxxon.
That change made no difference when I was having my difficulties, think that gives the device longer to process your notifications queue if it is large, but if the notifications queue has other issues then it won't help.
P.
Edit: SFAIK Think G-Alarm changes both of these registry values to 120 seconds on installation, That is what they are set to on my TD2
they are located in HKLM\System\CurrentControlSet\Control\Power\Timeouts\ if you wish to edit directly,
"BattResumingSuspendTimeout" and "ACResumingSuspendTimeout"
But does that fix the snooze function?
adigraham said:
But does that fix the snooze function?
Click to expand...
Click to collapse
doesn't sound like the same problem you have to be honest, the notifications queue stuff is related to the alarm never going off in the first place...
I'm not a klaxon user, but have had it installed in the past, are you sure that you don't have the light sensor alarm deactivation switched on or it set to switch the alarm off (rather than snooze) on shake?
P.
Thanks for replying mate, how would i know about the light sensor bit?
popkid said:
doesn't sound like the same problem you have to be honest, the notifications queue stuff is related to the alarm never going off in the first place...
I'm not a klaxon user, but have had it installed in the past, are you sure that you don't have the light sensor alarm deactivation switched on or it set to switch the alarm off (rather than snooze) on shake?
P.
Click to expand...
Click to collapse
I thought there was an option in Klaxon itself to use the light sensor to deactivate the alarm when a light is switched on?
Ah... Ok... just checked Klaxon release docs and it seems that isn't implemented yet... so thats a red herring!
It does say though... flip phone over to snooze
and shake to deactivate
I'm guessing that whatever you are doing is triggering the deactivation rather than the snoozing....!
One way to check, if you enable the integration to TF3D in klaxon then the time noted for the next alarm on your front page should increment to the next alarm set once the alarm has been deactivated, but not if it is snoozed, I think anyway.
P.
hey, yeah sorry i turn it over! it used to work with stock rom i think .. do you know what each option does in klaxxon? might just try g-aram or something?
popkid said:
I thought there was an option in Klaxon itself to use the light sensor to deactivate the alarm when a light is switched on?
Ah... Ok... just checked Klaxon release docs and it seems that isn't implemented yet... so thats a red herring!
It does say though... flip phone over to snooze
and shake to deactivate
I'm guessing that whatever you are doing is triggering the deactivation rather than the snoozing....!
One way to check, if you enable the integration to TF3D in klaxon then the time noted for the next alarm on your front page should increment to the next alarm set once the alarm has been deactivated, but not if it is snoozed, I think anyway.
P.
Click to expand...
Click to collapse
No, sorry not sure, guess there is some sort of sensitivity set somewhere where it determines whether you are shaking or just turning over, I used to use the turn over function in klaxon when I had it and it worked fine... in G-alarm I get what you describe btw the sensitivity is set such that when I turn it over it thinks I'm shaking it and deactivates, so that may not provide the fix you are after either... and G_alarm isn't free... if you hunt around, I'm sure there was another klaxon thread on here (possibly by the developer himself) that had some details of the sensitivity being changed between releases, may be a reg edit you can do to fine tune it?
Good Luck!
P.
Ok thanks for your help fella!
What rom you running btw?
popkid said:
No, sorry not sure, guess there is some sort of sensitivity set somewhere where it determines whether you are shaking or just turning over, I used to use the turn over function in klaxon when I had it and it worked fine... in G-alarm I get what you describe btw the sensitivity is set such that when I turn it over it thinks I'm shaking it and deactivates, so that may not provide the fix you are after either... and G_alarm isn't free... if you hunt around, I'm sure there was another klaxon thread on here (possibly by the developer himself) that had some details of the sensitivity being changed between releases, may be a reg edit you can do to fine tune it?
Good Luck!
P.
Click to expand...
Click to collapse
I am currently using HTC's default alarm app, but I'm finding the alarm tone won't repeat and it will only ring out once, for say 3-4 seconds, and none of the tones seem to be any longer.
This is an issue for a heavy sleeper like me as I can often sleep though this and I'm partial to the odd snooze so there might 3 or 4 chances for me to do this! .
Anyone found a way to keep the alarm ringing out (repeating) till I turn it off. I'm using Dutty's ROM so I I'm not sure whether this is just a quirk of his ROM or just a crap alarm from HTC.
Help or reccomendations of good alarm apps welcome!
its not the rom, its the crappy alarm from windows mobile.. really useless imo.
i use the app G-Alarm that works great
(link)
the main thing i have found since using 6.5.x build roms is that the repeat problem no longer occurs. It repeats until you stop it.
One suggestion i can offer is to forget about setting up the alarms through the htc alarms tab, do them direct into settings - menu - all settings - clocks and alarms.
you will find 1 - there are more alarm sounds available, (which tells me the HTC alarms tab isn't working exactly the same as the system one)
and
2 - the HTC alarms tab will copy what you put in the system alarms screen, BUT setting directly into the HTC alarms doesnt always copy through to the system alarms tab.
I also use G-alarm, its great. But here is a free one thats looks like G-alarm
http://www.freewarepocketpc.net/ppc-download-klaxon.html
mikeyj101 said:
I am currently using HTC's default alarm app, but I'm finding the alarm tone won't repeat and it will only ring out once, for say 3-4 seconds, and none of the tones seem to be any longer.
This is an issue for a heavy sleeper like me as I can often sleep though this and I'm partial to the odd snooze so there might 3 or 4 chances for me to do this! .
Anyone found a way to keep the alarm ringing out (repeating) till I turn it off. I'm using Dutty's ROM so I I'm not sure whether this is just a quirk of his ROM or just a crap alarm from HTC.
Help or reccomendations of good alarm apps welcome!
Click to expand...
Click to collapse
I have "Alarm-Light" selected as my alarm tone, and the thing doesn't shut up until I've stopped it.