Unlock Artemis Extrom - P3300, MDA Compact III upgrading etc.

While I was trying to unlock the extrom of my italian HTC P3300 when it self-deleted. Now it's still locked and empty and I can't restore the files I've found on the ftp site. So the question is: how can I unlock the Artemis extrom?

After more than 200 visits, can someone just tell me if it possible or not? Or I have to think that no answers means it's not possible to unlock extrom?

http://forum.xda-developers.com/showthread.php?t=296276&highlight=extrom

I hoped in something easier like unlock-copy-lock. If I install every single jar manually after an HR is it the same thing that repairing the extrom?

Related

Chalenge on 2020i (PH10C)

Is someone is capable to developpe for 2020i (PH10C) Alpine possibility to ;
Unlock Extended ROM
Unlock Storage
Dump And EDIT ROM ??
Thk's for reply
the disk-on-chip unlock password is ' eNiPlA' ( note that it starts with 2 spaces !! )
willem
WOAH, a start way
Thank's, but what and where i use it ?
QTEK 2020i, ROM 1.11.02 FRE
Upgrade on 2020i (Alpine)
Does anyone know how to change roms on the Alpine (XDA2i)? I get a country error code. Is there an upgrade exe without ID check?
Thanks
There is a new (yet unpublished version) of ER2003Edit. It uses Itsme's Perl script for decoding/encoding. This script does not calculate checksums correctly, so you can edit the ROM, but the AlUpgradeUT.exe fails with checksum error.
Anyone able to fix the script...?
Today we can upgrade 2020i with rom from different contry.
use a tools from xda_dev "MaUpgradeUt_noID.exe" in place of "AlUpgradeUt.exe". It's work fine, i used it to change my ExtendRom from DANGAARD to BRIGHPOINT
MaUpgradeUt_noID.exe
where can I download it ??
QTEK 2020i ROM upgrade info. But where is the original ROM?
Hi, apoujade. Thank you for the info.
I understand that I have to put "MaUpgradeUt_noID.exe" in place of "AlUpgradeUt.exe" in the directory where the temp files are extracted and continue. I understand that I can change my ROM to O2 by doing so.
But for any reason if this fails I may need the original QTEK ROM.
Is there anyone who has the address to download the original ROM for QTEK 2020i?
But Please do not give simple site address because they all ask IMEI numbers and check the number with the ones they sold. Please give the address of the file to download like this: http://www.qtek.nu/files/RUU172752WWE.zip
this is the address of the ROM for QTEK 2020. I need the same for 2020i
It will be very helpful. Regards.
mrtdgn have a look at koldun's reply http://forum.xda-developers.com/viewtopic.php?t=23754&highlight=. The first zip file is the default I had on my 2020i.
Hope this helps you.
not sure....
what is the disk on chip and how do i unlock it i see that itsme has found the password (for that i am greatful i am unsure what it does)
thanks
original QTEK 2020i ROM
Thanks epicus. I downloaded the file. It will make me comfortable before I try anything; I know that the tools work but just in case if I make a mistake
After the hardwork of "real" developers, there is no more SIM lock or restriction on the unit's brand and ROM versions.
Life is better for fans of XDA family. 8)
Qtek 2020i
Hi All
I hvan an Qtek 2020i Which is simlocket to Telia. how do I get it unlocked so that i can use a nother sim card in it

UnlockCID

Hello,
I've read some posts that explain how to make a software upgrade to my Qtek S200 to Jamin or Dopod rom. Before I make the update, I want to backup my existing S200 rom with aWizard.
Instead of the backup, I read about CID unlocking if you want to be able to downgrade again to an older rom version, so I would like to CID unlock my S200.
There are some links in the forum to UnlockCID application, that points to xda-developers ftp, but the archive was removed.
Please, anyone can upload again the file or send me by e-mail to dagasoft(at)gmail.com.
Thanks.
I've just discovered that aWizard gives the option of CID unlock device.
Do this work for a Qtek S200?
after reading more posts, I've found that CID unlock is not possible for my Qtek IPL/SPL 2.09.
Btw, is possible to upload a different firmware with the hacked Rom Update Utility, but I cant backup my existing rom before.
I see the only possible way to CID unlock my S200 nowadays is using jafwm, so I would be able to run r2sd all to backup my existing Qtek S200 ESP rom.
Thanks for the replies :roll:
You can upgrade with the existing in imate ftp...
And you can do it in that way http://forum.xda-developers.com/viewtopic.php?t=52244
This way can't be used if you have 2.15.001 IPL:SPL

How do I unlock the ext_rom ??

Anyone knows how ??
I have searched the whole forum but I have only found the ways to modify/cook the extended rom. I want to unlock and unhide it to use to store information
Is this possible on Alpine ??
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=373
Alpine the device that still cant unlock the extended rom... Too sad...
Correct me if I'm wrong:
In Alpine Extended ROM is really in ROM (Read Only Memory) and it is not locked in RAM as in Himalaya.
There will be no tool for write access unlocking!

extrom unlock

i'm not sure is here the place to post this thread.
yesterday i have flashed my HTC to new rom 1.35.255.2. before that i have unlocked my extrom and worked flawlessly. but now with the new rom i can only unhide the rom, i can't unlock it. i tryed all known registry hacks and locks and no result.
can anybody with 1.35.255.2 rom on htc help me to unlock it.
10x!
p.s. sry for the english
You need to make your device SuperCID first, then you can unlock the ExtROM. Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
http://forum.xda-developers.com/showthread.php?t=283750
wow i have to downgrade to bootloader 1.04 i think is too long procedure and risky for 10mb. i'll wait and buy 2gb microsd card...
thanks anyway!

Utilities for upgrade OS and ExtRom.

Utilities for upgrade OS and ExtRom, around of blocking CID.
In my edition.
1. ASerg-Imgfs (ImgFS Tools Version 2)
2. ASerg-Write-OS-ExtRom-Herald
ASerg said:
Utilities for upgrade OS and ExtRom, around of blocking CID.
In my edition.
1. ASerg-Imgfs (ImgFS Tools Version 2)
2. ASerg-Write-OS-ExtRom-Herald
Click to expand...
Click to collapse
Thanks - but again:
How do I get a COMPLETE dump of the Terra / Wing? I only can read out the OS - no SPL/IPL - NO Radio. How do I get this too?
Thanks
@papamopps
any idea how to find out the IPL/SPL version of the Heralds? It's easy to find it out on the Prophets
update:
Solved. Thanks papamopps!
Does someone own a utility to flash an OS or extrom etc. without the ActiveSync Connection? So in bootloader mode? Can't someone figure out how the RUU is capable with this function? It would be very very handy..
The Dutchman said:
Does someone own a utility to flash an OS or extrom etc. without the ActiveSync Connection? So in bootloader mode? Can't someone figure out how the RUU is capable with this function? It would be very very handy..
Click to expand...
Click to collapse
Some people from Hermes forum told me that the modRUU in Hermes is indeed a modified bootloader.exe. The original bootloader is exchanged by this one - so you can flash unsigned or with nbhgen signed OS.nb.
But this bootloader was taken from a prefactured Hermes (so as beta) and nobody has something like this for Herald.
So if you really want to crack teh bootloader - good luck.
hehe.
I´m also disappointed that there is (for now) no other chance.
could it be used for my c800?
ASerg-Imgfs (ImgFS Tools Version 2)
how can i use it ?
copy the extrom to folder(HERALD.WM6.WWE.ASerg.3US)?
Hi ASerg,
can you explain how to use ImgfsToDump and ImgfsFromDump?
Is it something with which you can create a dump to a memory card to be restored in bootloader mode from the Herald ?
Always looking for a way to recover my bricked herald that only go in bootloader mode without CID unlocked.
Thank you,
Chris
Up!..........
Hi and especially Hi to ASerg
as far as I know the extrom is about 10 MB which is not used in the herald official rom. Using the tools above it should be possible to make my own extrom , isn't it ? Do I have to use JumpSPL or similiar before using them ? Has anybody used done it so far (except for ASerg) ?
So I can make my own extrom and flash it but how can I install software which will run from the extrom ? (I've seen the ROMs of ASerg and he managed to install runnable software in the extrom ...) Please tell me the secrets
TIA !!
it can recover just the OS part of HTC Herald ? It would be REALLY useful !!
ps. still playing with Platform Builder to recovery my HTC herald dead device (btw, isnt mine!!)

Categories

Resources