Phone Dialer locks on 8125 - 8125, K-JAM, P4300, MDA Vario General

I have WM5 and after installing the Eten Dialer and the classic grey skin, I have enjoyed the big buttons.
But for some reason now after a phone call I hit the RED phone key to hang up and the dialer will go off and then try to start it by the GREEN button it will not restart.
My problem is sometimes the Phone Dialer will not restart so I have to reboot or soft reset. Is there anything I can do about this? Any other dialer to try?
If I do a hard reset will that bring back my regular dialer and the default skin. I really dont want to do this.
Thanks

Anyone?
I also noticed today while my 8125 was just lying around, I went to start up the phone so I could dial a friend. the dialer would not come up. I went to my contacts and the dialer allowed me to use it. after I found the contact and used the center hat button the phone dialed. after I hung up I tried to restart it regularly and it would not start.
need help

Related

Keeping Onscreen Phone Keypad Open (Non-Collapsed) - HTC Mogul

I have an HTC Mogul with the latest officially released ROM (WM 6.0). Whenever I finish a phone call, the onscreen phone keypad "collapses"; I then have to hit the left hardware button (whose function now reads "Keypad") to cause the entire, regular keypad (with all 10 buttons, *, #, etc.) to display again.
Is there a registry setting that will prevent the onscreen phone keypad from ever "collapsing" in the first place?
Thanks.
I'd also like to know if this is possible.
I also get annoyed when I call voicemail or some other automated number and have to take the phone away from my head to press the "show keypad" button... I would rather have it stay up...
same here!!!!
It's a pain to have to look at the phone screen and press SHOW KEYPAD each time I call in the voicemail or a company with a menu..... I'd really like if someone could tell me how to get the keypad to stay on the screen after we press the SEND key by default....
thanks!

T mobile wing... Dial button won't work.

The dial button won't work on my phone suddently for some reason. If someone calls... it will allow me to hit it and it'll answer but if I just pick up my phone and hit the dial button (to dial someone) nothing will happen. It'll just show my today screen as if it's disabled for something. I can go the long way around and hit "phone" in my menu or hit the dial button when I happen to be in a program but it refuses to work just by pressing it?
Any ideas?
I have thew same problem. I have to go through icontacts to call anyone. Kind of a pain. hope some one knows of a reg edit. Thanks, Scott

Green Phone Botton Doesn't Work

is there a Registry key(s) to view to check or make this button access the Phone or the functions of Dial? It stopped working on my last upgrade to 6.5, and I thought it was a problems with the new OS. I have now reverted back to 6.1 and it still doesn't work. I can't answer the phone with this hard button and I cannot bring up the dialer either. I have made the green phone button another button using HButton, and I made the green button access the Calculator using AEButton Plus. The calculator does not come up when the button is pushed, but I can make the phone come up, but not dial. This may be related to a problem when I do Phone Code Data ##3282#. The phone goes to EPST then quickly goes to the dialer so I can't do any troubleshooting. I posted this to ppcGeeks too. Help Please

Stops on dialer after call end with red button...

I'm noobie in android.Why when I'm finishing voice call with red button the phone stays on dialer page? When I end a call after red button press I wanna be immediately on home screen- just like in every different phones. Any chance to do that??
ROM build?
What type and whose ROM are you currently using...or USED during said issue?
I'm on Cyanogen's latest; this is not the case for myself upon ending a phone call. Do not double-click the end call, that typically freezes the phone's process of TRYING to send you back to the previous screen (i.e. - homescreen).
One-click does the trick. That rhyme was unintentional!
Also, if I might add - I'm talking about when I use the STANDARD DIALER, not a third-party application for contacts, call logs, and the dialer.
I found solution by my self and I'm very happy now!!! There is a little app called spare parts on the market. it gives additional settings. In settings "what end button do" i set go to homescreen then off. And this rocks!!! after first press od end button it goes to home screen , after second it turnes off

Dialer issues - by design, bug or only me?

Hi everyone,
I recently traded my HTC Touch dual for Leo, and so far I'm pretty impresed, and I really really like it. I've had it three days and charged it three or four times already, because I can't stop playing with that phone.
However, today I noticed the first thing that annoyed me, and it did so pretty instantly.
I was playing around in Sounds and notifications, and I enabled the hardware button click sound, (didn't enable the screen tapping sound), and noticed that most of the time the dialer would immediatly dial the last dialled number upon key press, the same effect as pressing the hardware pickup button twice very fast. After disabling the hardware button sounds, the issue was resolved, so I don't worry to much about it, but I'm curious if anyone can replicate this behaviour on his/hers HD2...
During all this playing with the dialer and accidently dialing numbers I noticed how I can't just select a number in the dialer, it automatically redials from my call list. So I never actually have to press that green "Talk" button, the call I select is just immediatly dialed. This is very annoying, als the context menu is only useful for the last call (or the first number on the list).
The dialer also 'quits to desktop' immediatly when I hang up by tapping the red end call button. No call summary? No need to close the dialer?
I was wondering abour your dialer behaviour: does is dial out on screen tap, or does it just select the number? How about ending calls?
Grtz
Lukas
Yes, I hate the dialler app. I only use it for dialling fresh numbers not in my contacts list, or my voicemail (press and hold #1#), otherwise I use the contacts app. The dialler does dial out on a screen tap and quitting the call returns me to the home screen.
So the "add new numbers to contacts after the call"-function doesn't work either? I assume it's a bug? I run v.1.48 , does the 1.43 ROM behave the same way? I didn't notice...
Thnx
Lukas
*bump*
Anyone running 1.43 ROM; is this behaviour same as on 1.48?
Hey guys,
I'm gonna bump it one more time.
Can someone with 1.43 take the 10 seconds it takes to check if they can select a call in the dialer without immediatly dialing it? If it's the same as on 1.48 I won't have to flash back to it and you'll save few hours of my time, which I would greatly appreciate.
Thnx again.
Lukas
I'm not sure what your on about, but if you mean when you press the hardware call button and the dialed list appears, if you want to open the caller you press the icon on the right hand side of the screen next to the callers/name number.
Tapping the name/number calls them.
This has always been the case in all ROM's not just Leo
I've had an HTC Touch Dual, and tapping the calls opened call history for that number, with left softkey being 'call'. Pressing the call hardware button would dial out as well.
Also, after pressing 'end call' my touch would display a call summary (call duration) and wouldn't quit to desktop immedietly so I had the time to dial another number as wel.
Thnx for answering tho... I appreciate it.
Grtz
Lukas
It's by design.
You can tap the card icon instead of the number and it will open the card where you can tap the number you want to dial. I think it was done this way by design. No problems for me, save me a few taps for a call and when I end it.
Lukass,
No such issue on 1.48 WWE.
However, the tapping sound disappears after the 1st press of the green button. It reappears after pressing a different button though.

Categories

Resources